LAKEWOOD, CO —
OSHA Inspection: A&C CONSTRUCTION LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of A&C CONSTRUCTION LLC in 980 BRENTWOOD, LAKEWOOD, CO 80214 (NAICS 238170). OSHA activity number 348402363.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- A&C CONSTRUCTION LLC
- Site address
- 980 BRENTWOOD
- City
- LAKEWOOD
- State
- CO
- ZIP
- 80214
- Mailing
- 2550 W96TH AVENUE LOT 343, FEDERAL HEIGHTS, CO 80260
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238170
- Employees
- 6
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.451 C02 I
- Issued
- Jul 30, 2025
- Abate by
- Aug 13, 2025
- Penalty
- Initial $2,838 · Current $2,838
General-duty citation text
29 CFR 1926.451(c)(2)(i): Footings were not level, sound, rigid, and capable of supporting the loaded scaffold without settling or displacement: a) 950 Brentwood Street Lakewood, CO 80214: On or about July 28, 2025, and at times prior, employees installing siding were exposed to unsafe scaffolding hazards, such as a potential falls, while working on a pump jack scaffold. The employer failed to ensure the footings were level and would not pose a risk for settling or displacement in that the scaffold was unstable where one of the poles was sitting half way on the wooden base plate and halfway off on uneven ground. Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (1)
- — Z (S) $2838
1926.451 F07
- Issued
- Jul 30, 2025
- Abate by
- Aug 13, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.451(f)(7): Scaffolds were not erected, moved, dismantled, or altered, by trained and experienced employees under the supervision and direction of a competent person qualified in scaffold erection, moving, dismantling or alteration:; Such activities were not performed only by experienced and trained employees selected for such work by the competent person. a) 950 Brentwood Street Lakewood, CO 80214: On or about July 28, 2025, and at times prior, one employee installing siding was exposed to unsafe scaffolding hazards, such as a potential fall, while working on a pump jack scaffold. The employer failed to ensure a competent person constructed the scaffold. The manager on site did not provide brackets for the employees and instructed them to install incorrect guardrails systems. The scaffold had open sides and ends of the platform. The two edges to enter or exit were open and the employee using the scaffold crafted 2x4s around the masts, in order to nail on 2x4 mid and top rails. In addition, the scaffold was unstable where one of the masts or poles was sitting half way on the wooden base plate and halfway off, ready to fall into the center of the plate's hole. Abatement certification and documentation are required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (1)
- — Z (S) $0
1926.451 G04 I
- Issued
- Jul 30, 2025
- Abate by
- Aug 13, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.451(g)(4)(i): Guardrail systems were not installed along all open sides and ends of platforms. a.) 980 Brentwood Street Lakewood, CO 80214: On or about July 28, 2025, and at times prior, one employee installing siding was exposed to fall hazards greater than 10 feet while working on a pump jack scaffold. The employer failed to ensure employees were protected from falls by installing the appropriate guardrails systems (e.g. brackets that come from the manufacturer) along all open sides and ends of the platform. The two edges to enter or exit were open and the employee using the scaffold crafted 2x4s around the masts, in order to nail on 2x4 mid and top rails. Abatement certification and documentation are required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (1)
- — Z (S) $0
1926.452 J02
- Issued
- Jul 30, 2025
- Abate by
- Aug 27, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.452(j)(2):Poles were not secured to the structure by rigid triangular bracing or equivalent at the bottom, top, and other points as necessary: a) On or about July 29, 2025, employees were exposed to fall hazards in that, pump jack poles were not secured at the bases to prevent movement.
Recent events (1)
- — Z (S) $0
1926.501 B13
- Issued
- Jul 30, 2025
- Penalty
- Initial $2,838 · Current $2,838
General-duty citation text
29 CFR 1926.501(b)(13):Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b): a.) 980 Brentwood Street Lakewood, Colorado: On or about July 28, 2025, and at times prior, employees performing framing operations were exposed to fall hazards greater than 6 feet while working on the second level of a two-story residential build. The employer failed to ensure employees were protected from falls by utilizing a fall protection system or guardrails.
Recent events (1)
- — Z (S) $2838
More inspections at A&C Construction LLC
View A&C Construction LLC's full OSHA safety record →
More inspections in this industry (NAICS 238170)
More inspections in CO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348402363.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.