OSHA Inspection: WILSON'S KITCHENS & MORE, LLC

Issued

Jan 30, 2026

Abate by

Mar 3, 2026

Penalty

Initial $3,972 · Current $2,780 Reduced

General-duty citation text

OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to fall hazards while working from a platform resting on the forks of a powered industrial truck:  On or about December 2, 2025, an employee was exposed to fall hazards while working from a pallet resting on the forks of the Hyster Fortis 50 Lift Truck, Model Number H50FT, Serial Number P177V04044N, because the pallet did not indicate the maximum work load including personnel and equipment, the weight of the empty platform, or the minimum capacity of the truck on which the platform could be used in accordance with ANSI B56.1-2012, American National Standard for Safety Standard for Low Lift and High Lift Trucks, Sections 4.17.2, 4.17.3 and 7.37.

Issued

Jan 30, 2026

Abate by

Mar 24, 2026

Penalty

Initial $3,972 · Current $0 Reduced

General-duty citation text

29 CFR 1910.147(c)(4)(ii)(B): The energy control procedures did not clearly and specifically outline the steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy:  On or about December 2, 2025, an employee was exposed to injury while performing servicing and maintenance activities on the planer and other equipment because the energy control procedures did not clearly and specifically outline the steps for shutting down and isolating all energy sources.

Issued

Jan 30, 2026

Abate by

Mar 24, 2026

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.147(c)(4)(ii)(C): The energy control procedure did not clearly and specifically outline the steps for placement, removal and transfer of lockout devices or tagout devices and the responsibility for them:  On or about December 2, 2025, an employee was exposed to injury while performing servicing and maintenance activities on the planer and other equipment because the energy procedures did not clearly and specifically outline the steps for the placement, removal and transfer of lockout devices.

Issued

Jan 30, 2026

Abate by

Mar 24, 2026

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.147(c)(4)(ii)(D): The energy control procedures did not clearly and specifically outline the requirements for testing a machine or equipment to determine and verify the effectiveness of lockout devices, tagout devices, and other energy control:  On or about December 2, 2025, an employee was exposed to injury while performing servicing and maintenance activities on the planer and other equipment because the energy control procedures did not clearly and specifically outline the requirements for verifying the effectiveness of the lockout devices.

Issued

Jan 30, 2026

Abate by

Mar 24, 2026

Penalty

Initial $3,972 · Current $0 Reduced

General-duty citation text

29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation and control:  On or about December 2, 2025, an employee was exposed to injury while servicing and maintaining the planer and other equipment and the employer had not trained the employee in accordance with the standard.

Issued

Jan 30, 2026

Penalty

Initial $2,838 · Current $0 Reduced

General-duty citation text

29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years:  On or about August 20, 2025, employees were exposed to injury while operating the Hyster Fortis 50 Lift Truck, Model Number H50FT, Serial Number P177V04044N, because the employer had not provided an evaluation of the operator's performance within the last three years.

Issued

Jan 30, 2026

Abate by

Mar 3, 2026

Penalty

Initial $1,702 · Current $1,191 Reduced

General-duty citation text

29 CFR 1910.213(i)(1): Non-working portion(s) of the blade of bandsaw(s) were not enclosed or guarded:  On or about  December 2, 2025, an employees was exposed to injury while operating the band saw because the guard is damaged and exposes the unused portion of the blade.

Issued

Jan 30, 2026

Abate by

Mar 24, 2026

Penalty

Initial $3,972 · Current $2,780 Reduced

General-duty citation text

29 CFR 1910.213(r)(4): Suitable guard(s) were not provided to reduce to a minimum the hazard due to the point of operation:  On or about August 20, 2025, employees were exposed to injury while operating the Powermatic Drill Press, Model Number 1140F, Serial Number  8914 F0725, because a suitable guard was not installed to protect employees from the point of operation.  On or about December 2, 2025, an employee was exposed to injury while operating the North Tech Industrial Machinery Up Cut Saw because a suitable guard was not installed to protect employees from the point of operation.

Issued

Jan 30, 2026

Abate by

Mar 3, 2026

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been  taken out of service until restored to safe operating condition:    On December 2, 2025, the brake light on the Hyster Fortis 50 Lift Truck, Model Number H50FT, Serial Number P177V04044N, was not operational and the powered industrial truck was not taken out of service.

Issued

Jan 30, 2026

Abate by

Mar 3, 2026

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.178(q)(1): Any power-operated industrial truck not in safe operating condition was not taken out of service, and/or repairs were not made by authorized personnel:  On December 2, 2025, the brake light on the Hyster Fortis 50 Lift Truck, Model Number H50FT, Serial Number P177V04044N, was not operational and the powered industrial truck was not taken out of service.

Issued

Jan 30, 2026

Abate by

Mar 3, 2026

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.305(g)(2)(iii): Flexible cords and cables were not connected to devices and fittings so that strain relief was provided that would prevent pull from being directly transmitted to joints or terminal screws:  On or about December 2, 2025, employees working at and around the planer were exposed to electrical hazards because there was no strain relief on the electrical cord.  On or about December 2, 2025, employees working at and around the sander were exposed to electrical hazards because there was no strain relief on the electrical cord to the foot pedal.