Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: STONE ATLANTA COUNTERTOPS INC

Follow-up inspection · Safety discipline

On , OSHA opened a follow-up safety inspection of STONE ATLANTA COUNTERTOPS INC in 130 BEASLEY ROAD, CARTERSVILLE, GA 30120 (NAICS 327991). OSHA activity number 348487919.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Stone Atlanta Countertops INC — free Get an email when a new federal OSHA severe-injury report for Stone Atlanta Countertops INC is published. One employer, no account, unsubscribe in one click.
Site address
130 BEASLEY ROAD
City
CARTERSVILLE
State
GA
ZIP
30120
Mailing
130 BEASLEY ROAD, CARTERSVILLE, GA 30120
Inspection type
Follow-up (F)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
327991
Employees
6
Ownership type
A

5 citations on file for this inspection.

5(a)(1)

Serious Gravity 10 1 instance 6 exposed
Issued
Feb 19, 2026
Penalty
Initial $4,965 · Current $4,965
OSH ACT of 1970 Section (5)(a)(1):The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm from struck-by hazards:  a) Throughout the facility: On or about September 4, 2026, and times prior, employees were exposed to struck-by hazards while they were permitted to operate the Aardwolf Forklift Boom 2720 with unsecured attachments.
Recent events (2)
  • — C (S) $4965
  • — Z (S) $4965

1910.305 B02 I

Serious Gravity 5 2 instances 6 exposed
Issued
Feb 19, 2026
Penalty
Initial $2,837 · Current $2,837
29 CFR  1910.305(b)(2)(i): Each outlet box in completed installations did not have a cover, faceplate, or fixture canopy:   a) Production Area:  On September 4, 2025 and times prior, the employer exposed employees electric shock hazards in that employees were not protected from inadvertent contact with  to live electrical wire as electrical outlet covers were missing, exposing employees to 120VAC.
Recent events (2)
  • — C (S) $2837
  • — Z (S) $2837

1910.305 C04

Serious Gravity 5 1 instance 6 exposed
Issued
Feb 19, 2026
Penalty
Initial $0 · Current $0
29 CFR  1910.305(c)(4):Faceplates for flush-mounted snap switches. Snap switches mounted in boxes shall have faceplates installed so as to completely cover the opening and seat against the finished surface.  a) Production Area: On September 4, 2025 and times prior, the employer exposed employees electric shock hazards in that employees were not protected from inadvertent contact with  to live electrical wire as light switch covers were missing from the switch near the vending machine.
Recent events (2)
  • — C (S) $0
  • — Z (S) $0

1910.178 A05

Other-than-serious 1 instance 6 exposed
Issued
Feb 19, 2026
Abate by
Mar 19, 2026
Penalty
Initial $0 · Current $0
29 CFR  1910.178(a)(5):The powered industrial truck was equipped with front-end attachments other than factory installed attachments, however the employer did not request that the truck be marked to identify the attachments and show the approximate weight of the truck and attachment combination at maximum elevation with load laterally centered:   a) Throughout the facility: On September 4, 2025 and times prior, the employer did not ensure that the attachment data plate was installed on the truck to identify the maximum load capacity of the forklift  when lifting loads using the attachment.
Recent events (2)
  • — C (O) $0
  • — Z (O) $0

1910.303 B01 II

Other-than-serious 1 instance 6 exposed
Issued
Feb 19, 2026
Penalty
Initial $0 · Current $0
29 CFR  1910.303(b)(1)(ii):Electrical equipment was not free from recognized hazards, based on the mechanical strength and durability, including, for parts designed to enclose and protect other equipment, the adequacy of the protection thus provided:   a) Production Area: On September 4, 2025 and times prior, the employer exposed employees to electrical hazards in that electrical panel covers were missing screws on 120VAC panels.
Recent events (2)
  • — C (O) $0
  • — Z (O) $0

View Stone Atlanta Countertops INC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348487919.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.