OSHA Inspection: CAPPELLI PROPERTY SERVICES, LLC

Issued

2026-01-30 00:00:00

Abate by

2026-02-26 00:00:00

Penalty

Initial $8276.00 · Current $5793.00 Reduced

General-duty citation text

OSH ACT of 1970 Section (5)(a)(1):The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees.  a) 5 Parkway Circle New Castle, De 19720 (Shop bay): Employees were exposed to shear and crush hazards while removing the guard from the Scag Power Equipment Truck Loader leaf vacuum to service the machine. On November 20, 2025, an employee removing the guard removed the bolts in the incorrect order causing the guard to swing resulting in an avulsion to the right index finger and an amputation to the right ring finger.  Feasible recommended means of abatement  include but are not limited to:  1. Engineering Controls Install a Guard Retention System: Use hinged or captive fasteners so guards cannot swing freely when bolts are loosened. Energy Isolation: Implement lockout/tagout (LOTO) procedures before any maintenance. Ensure the impeller and moving parts are fully de-energized. Secondary Support Brackets: Add brackets or chains to hold the guard securely during removal.  2. Administrative Controls Written SOPs: Develop step-by-step procedures for safe guard removal, including correct bolt sequence. Training: Provide mandatory training on servicing equipment, emphasizing pinch-point and crush hazards. Job Hazard Analysis (JHA): Conduct JHA for all servicing tasks and review annually.  3. Personal Protective Equipment (PPE) Cut-Resistant Gloves: ANSI-rated gloves to reduce laceration risk. Eye and Hand Protection: Safety glasses and reinforced gloves during maintenance.  4. Manufacturer Guidance Follow Scag Power Equipment's service manual for guard removal and maintenance.

Issued

2026-01-30 00:00:00

Abate by

2026-02-26 00:00:00

Penalty

Initial $9931.00 · Current $6952.00 Reduced

General-duty citation text

29 CFR 1910.132(d)(1):The employer did not assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE).  a) 5 Parkway Circle New Castle, De 19720 (Shop bay): On or about November 20, 2025, employees were exposed to shear and nip points hazards along with amputation hazards when then employer failed to conduct a PPE hazard analysis of the maintenance shop area.

Issued

2026-01-30 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.1200(g)(8): The employer did not ensure that Safety Data Sheets were readily accessible during each work shift to employees when they were in their work area(s).  a) 5 Parkway Circle New Castle, De 19720 (Shop Bay): On or about November, and at times prior thereto, employees who use hazardous chemicals such as, but not limited to, def fluid, motor oil 10W-30, Napa-20 degree wiper fluid, AW hydraulic oil, and starting fluid were not provided the safety data sheet (SDS) for the chemical placed in their work area.