WATSONTOWN, PA ·
OSHA Inspection: LANDPRO EQUIPMENT
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of LANDPRO EQUIPMENT in 141 BYERS LANE, WATSONTOWN, PA 17777 (NAICS 811411). OSHA activity number 348699125.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- LANDPRO EQUIPMENT
- Site address
- 141 BYERS LANE
- City
- WATSONTOWN
- State
- PA
- ZIP
- 17777
- Mailing
- 141 BYERS LANE, WATSONTOWN, PA 17777
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 811411
- Employees
- 19
- Ownership type
- Private (A)
Citations
5 citations on file for this inspection.
5(a)(1)
- Issued
- May 6, 2026
- Abate by
- Jun 2, 2026
- Penalty
- Initial $5,674 · Current $5,674
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1):The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees such as struck by hazards from the use of polyvinyl chloride (PVC) pipe to transport compressed air: a) Shop- On or about January 20, 2026, employees were exposed to struck by hazards from the use of polyvinyl chloride (PVC) pipe to transport air to each work station for use with pneumatic tools. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- · C (S) $5674
- · Z (S) $5674
1910.215 A04
- Issued
- May 6, 2026
- Abate by
- May 18, 2026
- Penalty
- Initial $9,458 · Current $9,458
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: a) Bench Grinder: On or about January 20, 2026, employees were exposed to struck by hazards from a bench grinder with a work rest that was greater one eighth inch from the grinding wheel (approximately one half inch). ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- · C (S) $9458
- · Z (S) $9458
1910.215 B09
- Issued
- May 6, 2026
- Abate by
- Jun 2, 2026
- Penalty
- Initial $9,458 · Current $9,458
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: a) Bench Grinder- On or about January 20, 2026, employees were exposed to struck by hazards from a bench grinder with abrasive wheel that did not have an adjustable tongue guard. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- · C (S) $9458
- · Z (S) $9458
1910.242 B
- Issued
- May 6, 2026
- Abate by
- May 18, 2026
- Penalty
- Initial $7,566 · Current $7,566
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: a) HY-LO Brass Air Gun- On or about January 20, 2026, employees were exposed to struck by hazards from the use of compressed air for cleaning purposes that was not reduced to less than 30 p.s.i. b) Green Air Gun- On or about January 20, 2026, employees were exposed to struck by hazards from the use of compressed air for cleaning purposes that was not reduced to less than 30 p.s.i. ABATMENT CERTIFICATION REQUIRED
Recent events (2)
- · C (S) $7566
- · Z (S) $7566
1910.178 L06
- Issued
- May 6, 2026
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l): a) Shop- On or about January 20, 2026, the employer failed to certify that each operator has been trained and evaluated as required by this paragraph. CORRECTED DURING INSPECTION
Recent events (2)
- · C (O) $0
- · Z (O) $0
More inspections in this industry (NAICS 811411)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 348699125.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.