OSHA Inspection: TURNKEY SOLUTIONS CORPORATION

Issued

2026-05-01 00:00:00

Abate by

2026-05-21 00:00:00

Penalty

Initial $9931.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative:  On or about January 8, 2026, employees engaged in equipment maintenance and servicing activities in the Assembly Department of Turnkey Solutions Corporation located at 12001 Cary Circle, La Vista, Nebraska were exposed to caught in, electrocution, and thermal hazards in that the employer's energy control program did not included periodic inspection of lockout/tagout procedures.  Instances included but were not limited procedures to maintain and/or service the Horizon Binder, model BQ-440.

Issued

2026-05-01 00:00:00

Abate by

2026-06-22 00:00:00

Penalty

Initial $0.00 · Current $5000.00

General-duty citation text

29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:  Employees engaged in media production and assembly activities in the Assembly Department and Warehouse of Turnkey Solutions Corporation located at 12001 Cary Circle, La Vista, Nebraska were exposed to caught-in and laceration hazards in that the employees did not equipment was locked out/tagged out prior to clearing jams.  Instances included but were not limited to: i.  On or about December 22, 2025, when employees opened interlocked door(s) on the  GIMA DVD 879, serial number 87932E0 to clear product jams while the equipment was powered on and ii. On or about December 29, 2025, when employees opened the interlocked cover on the Heidelberg Die Cutter elevator to remove paper from the tray while the equipment was powered on.

Issued

2026-05-01 00:00:00

Abate by

2026-06-22 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.147(c)(4)(ii): The energy control procedures did not clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, including, but not limited to Items of this section:  On or about January 8, 2026, employees engaged in equipment maintenance and servicing activities in the Assembly Department of Turnkey Solutions Corporation located at 12001 Cary Circle, La Vista, Nebraska were exposed to caught in, electrocution, and thermal hazards in that the employer did not ensure energy control procedures for the Horizon Binder, model BQ-440 contained clear and specific steps to be followed in order to control hazardous energy.  Instances included but were not limited to: i. A specific statement of the intended use of the procedure, ii. Specific procedural steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy, iii. Specific procedural steps for the placement, removal and transfer of lockout devices or tagout devices and the responsibility for them, and iv. Specific requirements for testing a machine or equipment to determine and verify the effectiveness of lockout devices, tagout devices, and other energy control measures.

Issued

2026-05-01 00:00:00

Abate by

2026-05-21 00:00:00

Penalty

Initial $5958.00 · Current $3000.00 Reduced

General-duty citation text

29 CFR 1910.178(a)(6): The employer did not ensure that all nameplates and markings were in place:  On or about January 6, 2026, it was identified that employees engaged in material handling in the Assembly Department and Warehouse of Turnkey Solutions Corporation located at 12001 Cary Circle, La Vista, Nebraska were exposed to struck-by hazards in that the data plate identifying capacity and lift height was missing from the Raymond Deep Reach stand-up forklift, Model MP235-01, serial number 00410.

Issued

2026-05-01 00:00:00

Abate by

2026-06-22 00:00:00

Penalty

Initial $11917.00 · Current $6000.00 Reduced

General-duty citation text

29 CFR 1910.178(g)(2): Battery charging apparatus for industrial trucks located in battery changing and charging installation was not protected from damage by trucks:  On or about January 6, 2026, it was identified that employees engaged in material handling activities  the Assembly and Warehouse Departments of Turnkey Solutions Corporation located at 12001 Cary Circle, La Vista, Nebraska were exposed to shock and electrocution hazards in that the employer did not ensure powered industrial truck battery chargers were protected from damage by trucks.  Instances included but were not limited to:  i. CEN Electronics industrial battery charger, model 12B0600N2B, serial number 01F00207, where the charger was on the ground approximately 19 inches away from a parked powered industrial truck, ii. Barrett Battery industrial battery charger, model 1B12-765, serial number 30-801V9376-H0, where the charger was on the ground approximately 19 inches away from a parked powered industrial truck, iii. Allied C&D Power System industrial battery charger, model  FR18CE640; serial number C PIU851531, where the charger was on the ground approximately 14 1/2 inches away from a parked powered industrial truck, and iv. Hobart Accu-Charger industrial battery charger, model 750C3-18, serial number 490CS43917 where the charger was on the ground approximately 24 1/2 inches away from a parked powered industrial truck.

Issued

2026-05-01 00:00:00

Abate by

2026-06-22 00:00:00

Penalty

Initial $7944.00 · Current $4000.00 Reduced

General-duty citation text

29 CFR  1910.178(l)(1)(i):The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):  On or about January 6, 2026, it was identified that employees engaged in material handling in the Assembly and Warehouse Departments of Turnkey Solutions Corporation located at 12001 Cary Circle, La Vista, Nebraska were exposed to struck-by hazards in that the employer did not ensure employees were trained and evaluated on operation of the Raymond motorized pallet jack, model 112TM-FRE60L, serial number 112-03-48891 prior to truck use.

Issued

2026-05-01 00:00:00

Abate by

2026-06-22 00:00:00

Penalty

Initial $5958.00 · Current $3000.00 Reduced

General-duty citation text

29 CFR 1910.178(q)(7): Industrial trucks were not examined before being placed in service:  On or about January 6, 2026, employees engaged in material handling activities in the Assembly and Warehouse Departments of Turnkey Solutions Corporation located at 12001 Cary Circle, La Vista, Nebraska were exposed to struck-by hazards in that the employer did not ensure powered industrial trucks were inspected prior to initial use.  Instances included but were not limited to: i. Raymond motorized pallet jack, model 112TM-FRE60L, serial number 112-03-48891, ii. Raymond Deep Reach, model MPJ235-01, serial number 004102, and iii. Raymond stand-up forklift, model 21i-DR30TT, serial number 021D-92-06247.

Issued

2026-05-01 00:00:00

Penalty

Initial $13902.00 · Current $7000.00 Reduced

General-duty citation text

29 CFR 1910.303(b)(1): Electrical equipment was not free from recognized hazards that were likely to cause death or serious physical harm to employees:  On or about December 29, 2025, employees engaged in material handling activities in the Warehouse Department of Turnkey Solutions Corporation located at 12001 Cary Circle, La Vista, Nebraska were exposed to shock and electrocution hazard in that the employer did not ensure industrial battery charging apparatus cords were free from damage.  Instances of cord damage included but were not limited to:  i. CEN Electronics industrial battery charger, model 12B0600N2B, serial number 01F00207, where the charger cable was damaged and copper wiring was visible. ii. Hobart Accu-Charger industrial battery charger, model 750C3-18, serial number 490CS43917 where the charger cable was damaged and copper wiring was visible.