Contact with hot objects or substances · Heat (thermal) burns, unspecified
Final narrative
An employee was preparing to clean product transfer lines. The employee placed a hose with a connected stainless-steel wand into a 55-gallon drum used to rinse the lines and that he had just emptied of residual water. While lifting the drum into the vertical position, the main water valve lever/handle dropped to the fully open position. This caused an increase in flow and backpressure in the hose. The hose disconnected and the employee was sprayed with hot water (120 degrees F) on the right side, resulting in burns to their arm, shoulder, and back.
An employee connected a steam line to a hose to clean equipment when the fitting broke loose. They were struck by steam in the left inner thigh, resulting in burns that required hospitalization.
An employee was making tea when she noticed tea grinds were collecting on the side and water was no longer dripping through the funnel. The employee was checking the funnel when boiling water and tea grinds spilled onto the left side of her body. The employee sustained burns to her neck, back, and arm.
An employee had turned off the ball valve on a waterpipe system and was removing the plug when the coupling system attached to the strainer came apart. Hot water sprayed on his arm and back, resulting in first- and second-degree burns that required surgery.
An employee was using a shovel to remove waste vermiculite from molten zinc. The metal had been placed in a bin and partially hardened. The employee broke through the partially hardened metal; still-molten metal flowed to the employee's steel-toed right boot and entered through the cloth boot tongue. The employee suffered a third-degree burn to the right foot and was hospitalized.