Channelview, TX ·
OSHA Injury Report: San Jac Marine, LLC
Injury · Days away from work
At a glance
On , an injury at San Jac Marine, LLC in 17112 Market St, Channelview, TX 77530 resulted in days away from work. Employee was foreman in shipyard (i.e., facility capable of building ships).
Where did this happen?
- Establishment
- San Jac Marine, LLC
- Parent company
- Kirby Corporation
- Street
- 17112 Market St
- City
- Channelview
- State
- TX
- ZIP
- 77530
- On-site location
- West Yard
What was the outcome?
- Outcome
- Days away from work (code 2)
- Type
- Injury (code 1)
- Days away from work
- 33
- Days restricted or transferred
- 180
Before the incident
Worker was preparing to shift a stairway to a different location. The stairway had (2) scaffold board loosely placed on the upper framing of the stairway. [REDACTED] attempted to remove the scaffold boards prior to calling an operator for the lift to prevent the boards from falling during the shifting of the stairway. For reference the stairway measures 3 W x 17 H x 10 L and was fabricated using 4 angle frames along with 10 channels for the diagonal stairway frame. The scaffold boards were laying on the second set of angles framing approximately 9 from the ground. Worker climbed the first level of the angle framing approximately 3 off the ground to reach the boards.
What happened
Worker attempted to shift the boards onto the forklifts forks which were level with the boards. Worker had his arms fully extended but was unable to fully grab the boards with enough strength to shift slide them over to the forks. Worker then stood on a horizontal angle framing slightly above to get a better reach. Worker grabbed on to a piece of flat bar that was tack welded to the stairway for support as he attempted to shift the boards over. Worker didnt realize that the flat bar he grabbed was not part of the stairway fabrication member but rather a piece of steel leftover from a welder that used it to hang his welding lead from a previous job. As worker grabbed the flat bar with his left hand he leaned back and used his right hand to push the board closer to the forklifts forks. By doing so the tack weld on the flat bar broke and caused worker to free fall approximately 4. Worker fell on the lower horizontal bracing striking his shoulder against the angle before landin
Injury or illness
Closed L2 Compression Fracture
Object or substance involved
framing of stairway
Summary line
Closed L2 compression fracture due to a fall.
Employee and industry
- Job description
- Foreman
- SOC code
- 51-1011: First-Line Supervisors of Production and Operating Workers
- NAICS code
- 336611: Shipyard (i.e., facility capable of building ships)
- NAICS vintage
- 2012
- Employees at this establishment (2024 average)
- 100
- Hours worked at this establishment (2024 total)
- 266,034
- EIN
- 822833795
- Establishment ID
- 749157
- Employer case #
- 1
When (timing detail)
- Date of incident
- Shift started
- 05:00
- Time of incident
- 06:15
- Filing year
- 2024
- Submitted to OSHA
- 2025-03-03
More injuries at San Jac Marine, LLC
View San Jac Marine, LLC's full OSHA safety record →
More injuries in this industry (NAICS 336611)
More injuries in TX
Source
Data from OSHA ITA Form 300/301 electronic submissions, filing year 2024. ITA Case Detail records are establishment-reported submissions, not OSHA inspections, so no per-record IMIS deep link exists.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.