BENSALEM, PA —
OSHA Inspection: MRI FLEXIBLE PACKAGING
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of MRI FLEXIBLE PACKAGING in 1766 WINCHESTER ROAD, BENSALEM, PA 19020 (NAICS 000000). OSHA activity number 302336870.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MRI FLEXIBLE PACKAGING
- Site address
- 1766 WINCHESTER ROAD
- City
- BENSALEM
- State
- PA
- ZIP
- 19020
- Mailing
- 1766 WINCHESTER ROAD, BENSALEM, PA 19020
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 2679
- Employees
- 59
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
12 citations on file for this inspection.
5(a)(1)
- Issued
- Aug 2, 2000
- Abate by
- Sep 5, 2000
- Penalty
- Initial $1,100 · Current $550 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the hazard of being struck by a falling load: a) Silicon Coating Department, Hot Melt Coating Department, Polystar Department - Custom roll lifting devices which have been fabricated in house are used to lift rolls of material weighing up to 800 pounds. These home made lifting devices are constructed of steel rods welded or bolted to a channel steel spreader bar. The steel bars are bent into a hook to accept the roll shafts. The devices attach to the hoist hook by a center eye bolt, bolted or welded to the channel steel spreader, or a steel rod bent in a "U" shape and welded to the channel steel spreader. These devices were not proof tested or provided with a rated load capacity attached to the lifting device. ABATEMENT NOTE: One feasible and acceptable method to abate this hazard is to provide a lifting device designed and manufactured in accordance with ANSI B30.20, Below-the Hook Lifting Devices, latest edition. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, the date and method of abatement, and state that employees and their representatives were informed of this abatement.tives
Recent events (2)
- — I (S) $550.00
- — Z (S) $1100.00
1910.147 C04 II
- Issued
- Aug 2, 2000
- Abate by
- Dec 5, 2000
- Penalty
- Initial $1,925 · Current $965 Reduced
Recent events (2)
- — I (S) $965.00
- — Z (S) $1925.00
1910.147 D04 I
- Issued
- Aug 2, 2000
- Abate by
- Dec 5, 2000
Recent events (2)
- — I (S)
- — Z (S)
1910.212 A01
- Issued
- Aug 2, 2000
- Abate by
- Feb 28, 2001
- Penalty
- Initial $1,100 · Current $550 Reduced
Recent events (3)
- — P (S) $550.00
- — I (S) $550.00
- — Z (S) $1100.00
1910.212 A03 II
- Issued
- Aug 2, 2000
- Abate by
- Feb 28, 2001
Recent events (3)
- — P (S)
- — I (S)
- — Z (S)
1910.219 B02
- Issued
- Aug 2, 2000
- Abate by
- Sep 5, 2000
- Penalty
- Initial $1,100 · Current $550 Reduced
Recent events (2)
- — I (S) $550.00
- — Z (S) $1100.00
1910.219 F01
- Issued
- Aug 2, 2000
- Abate by
- Feb 28, 2001
Recent events (3)
- — P (S)
- — I (S)
- — Z (S)
1910.305 G02 II
- Issued
- Aug 2, 2000
- Abate by
- Sep 5, 2000
- Penalty
- Initial $825 · Current $410 Reduced
Recent events (2)
- — I (S) $410.00
- — Z (S) $825.00
1910.132 A
- Issued
- Aug 2, 2000
- Abate by
- Aug 21, 2000
1910.253 B02 II
- Issued
- Aug 2, 2000
- Abate by
- Aug 2, 2000
1910.253 B04 III
- Issued
- Aug 2, 2000
- Abate by
- Aug 2, 2000
1910.303 B01
- Issued
- Aug 2, 2000
- Abate by
- Aug 2, 2000
More inspections at MRI Flexible Packaging
View MRI Flexible Packaging's full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 302336870.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.