SPENCER, NY ·
OSHA Inspection: THE FAIRMAN CORPORATION
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of THE FAIRMAN CORPORATION in RIG #17, RIDGE ROAD AND JENNINGS ROAD, SPENCER, NY 14883 (NAICS 000000). OSHA activity number 304586860.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- THE FAIRMAN CORPORATION
- Site address
- RIG #17, RIDGE ROAD AND JENNINGS ROAD
- City
- SPENCER
- State
- NY
- ZIP
- 14883
- Mailing
- R.R.#1 HELVETIA ROAD, PO BOX 288, DUBOIS, PA 15801
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (N)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 1382
- Employees
- 12
- Ownership type
- Private (A)
Citations
20 citations on file for this inspection.
5(a)(1)
- Issued
- Oct 25, 2001
- Abate by
- Feb 28, 2002
- Penalty
- Initial $1,750 · Current $1,138 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the hazard of being struck by pipes should they become unsecured, or by falling loads if the hoists or cables or lifting devices fail: a)Bennett Property, On or about 7/6/01: Return Mud Line was not secured so that it would not come loose. 1.Return Mud Line, Rigid return line was not secured to prevent displacement. The return line did come loose, causing serious injury. Among other methods, one feasible and acceptable abatement method to correct this hazard is to: 1.Follow guidelines as referenced in API 54, Section 9.13.3, 1999, Recommended Practice for Occupational Safety for Oil and Gas Well Drilling and Servicing Operations, by securing lines. b)Kienzle Property #1, On or about 7/20/01: Below the hook lifting devices had no rated load markings and no initial, frequent or periodic inspections performed, including, but not limited to: 1.On the rig floor, a spreader type lifting device had no rated load markings and no inspections were conducted. Among other methods, several feasible and acceptable methods to correct these hazards are to: 1.Inspect prior to initial use, all new, modified or repaired lifting devices by a designated person and perform an operation test. 2.Mark the rated load capacity of the lifting device on the main structure or equivalent. 3.Conduct frequent and periodic inspections of the lifting devices for wear, deterioration or malfunction as referenced in ASME B30.20. 4. Follow guidelines as referenced in API 54, Section 9.7.1, 1999, Recommended Practice for Occupational Safety for Oil and Gas Well Drilling and Servicing Operations. c)Kienzle Property #1, On or about 7/20/01: Hoists, Derricks, and Hoisting lines were not inspected such as, but not limited to: 1.Dozer mounted hoists were not provided with load ratings and inspections. 2.Dozer mounted booms were not provided with load ratings and inspections. 3.Cable connections were not rated and were not provided with inspections. Among other methods, several feasible and acceptable abatement methods to correct these hazards are to: 1.Mark the rated loads on the hoists and structures. 2.Test all new, repaired, or modified equipment prior to use. 3.Provide proper hook to cable connections instead of knots. 4.Follow guidelines as referenced in API 54, 1999, Recommended Practice for Occupational Safety for Oil and Gas Well Drilling and Servicing Operations. 5.Follow guidelines as referenced in ANSI B30.7, Base Mounted Drum Hoists. Abatement certification must be submitted for this item.
Recent events (3)
- · P (S) $1137.50
- · I (S) $1137.50
- · Z (S) $1750.00
5(a)(1)
- Issued
- Oct 25, 2001
- Abate by
- Nov 12, 2001
- Penalty
- Initial $1,750 · Current $1,138 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the hazard of fire or other emergency: a)Kienzle Property #1, On or about 7/20/01: Auxiliary means of egress (such as Geronimo Lines) were not provided from the Derrickman's working platform. Among other methods, several feasible and acceptable methods to correct these hazards are to: 1.Provide a secondary means of escape (such as a Geronimo Line) for employees required to work on the Derrick Platform. 2.Follow the requirements of API 54, Section 6.10.1, 1999. Abatement certification must be submitted for this item.
Recent events (2)
- · I (S) $1137.50
- · Z (S) $1750.00
1910.23 C01
- Issued
- Oct 25, 2001
- Abate by
- Dec 15, 2001
- Penalty
- Initial $3,500 · Current $2,275 Reduced
Recent events (2)
- · I (S) $2275.00
- · Z (S) $3500.00
1910.23 D01 III
- Issued
- Oct 25, 2001
- Abate by
- Oct 30, 2001
- Penalty
- Initial $1,050 · Current $683 Reduced
Recent events (2)
- · I (S) $682.50
- · Z (S) $1050.00
1910.27 D05
- Issued
- Oct 25, 2001
- Abate by
- Nov 2, 2001
- Penalty
- Initial $3,500 · Current $2,275 Reduced
Recent events (2)
- · I (S) $2275.00
- · Z (S) $3500.00
1910.132 D01
- Issued
- Oct 25, 2001
- Abate by
- Nov 27, 2001
- Penalty
- Initial $1,400 · Current $910 Reduced
Recent events (2)
- · I (S) $910.00
- · Z (S) $1400.00
1910.132 F01
- Issued
- Oct 25, 2001
- Abate by
- Dec 15, 2001
Recent events (2)
- · I (S)
- · Z (S)
1910.135 A01
- Issued
- Oct 25, 2001
- Abate by
- Nov 27, 2001
Recent events (2)
- · I (S)
- · Z (S)
1910.133 A01
- Issued
- Oct 25, 2001
- Abate by
- Nov 12, 2001
- Penalty
- Initial $1,050 · Current $683 Reduced
Recent events (2)
- · I (S) $682.50
- · Z (S) $1050.00
1910.151 C
- Issued
- Oct 25, 2001
- Abate by
- Nov 12, 2001
Recent events (2)
- · I (S)
- · Z (S)
1910.157 C04
- Issued
- Oct 25, 2001
- Abate by
- Nov 12, 2001
- Penalty
- Initial $1,400 · Current $910 Reduced
Recent events (2)
- · I (S) $910.00
- · Z (S) $1400.00
1910.157 G01
- Issued
- Oct 25, 2001
- Abate by
- Nov 12, 2001
Recent events (2)
- · I (S)
- · Z (S)
1910.176 B
- Issued
- Oct 25, 2001
- Abate by
- Oct 30, 2001
- Penalty
- Initial $1,400 · Current $910 Reduced
Recent events (2)
- · I (S) $910.00
- · Z (S) $1400.00
1910.212 A01
- Issued
- Oct 25, 2001
- Abate by
- Dec 15, 2001
- Penalty
- Initial $2,450 · Current $1,593 Reduced
Recent events (2)
- · I (S) $1592.50
- · Z (S) $2450.00
1910.219 H01
- Issued
- Oct 25, 2001
- Abate by
- Nov 12, 2001
- Penalty
- Initial $1,400 · Current $910 Reduced
Recent events (2)
- · I (S) $910.00
- · Z (S) $1400.00
1910.219 D01
- Issued
- Oct 25, 2001
- Abate by
- Nov 12, 2001
- Penalty
- Initial $1,400 · Current $910 Reduced
Recent events (2)
- · I (S) $910.00
- · Z (S) $1400.00
1910.219 E01 I
- Issued
- Oct 25, 2001
- Abate by
- Nov 12, 2001
Recent events (2)
- · I (S)
- · Z (S)
1910.1200 E01
- Issued
- Oct 25, 2001
- Abate by
- Dec 15, 2001
Recent events (2)
- · I (O)
- · Z (O)
1910.1200 G08
- Issued
- Oct 25, 2001
- Abate by
- Nov 27, 2001
Recent events (2)
- · I (O)
- · Z (O)
1910.1200 H01
- Issued
- Oct 25, 2001
- Abate by
- Dec 15, 2001
Recent events (2)
- · I (O)
- · Z (O)
More inspections at The Fairman Corporation
View The Fairman Corporation's full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 304586860.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.