HILLSIDE, IL —
OSHA Inspection: ACE ANODIZING & IMPREGNATING, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ACE ANODIZING & IMPREGNATING, INC. in 4161 BUTTERFIELD ROAD, HILLSIDE, IL 60162 (NAICS 332813). OSHA activity number 305974420.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ACE ANODIZING & IMPREGNATING, INC.
- Site address
- 4161 BUTTERFIELD ROAD
- City
- HILLSIDE
- State
- IL
- ZIP
- 60162
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332813
- SIC code (legacy)
- 3471
- Employees
- 40
- Ownership type
- A
Citations
11 citations on file for this inspection.
5(a)(1)
- Issued
- Feb 14, 2003
- Abate by
- Mar 13, 2003
- Penalty
- Initial $490 · Current $490
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to hazards of the rotating blade: a) West Side of Building - The Delta Milwaukee vertical band saw serial#97-3073 was not equipped with a magnetic restarter or similar device, as prescribed by the American National Standards, ANSI B11.10-1990, Section 5.2.3.4, that in the event of an interruption in the electrical supply would prevent the saw from restarting automatically when power is restored. A feasible means of abatement would be to provide a magnetic restarter or similar device as required by ANSI B11.10-1990. Abatement certification is required for this item in accordance with 29 CFR 1903.19(c).
1910.212 A01
- Issued
- Feb 14, 2003
- Abate by
- Mar 13, 2003
- Penalty
- Initial $490 · Current $490
1910.212 B
- Issued
- Feb 14, 2003
- Abate by
- Mar 13, 2003
- Penalty
- Initial $490 · Current $490
1910.215 A04
- Issued
- Feb 14, 2003
- Abate by
- Mar 13, 2003
- Penalty
- Initial $525 · Current $525
1910.215 B09
- Issued
- Feb 14, 2003
- Abate by
- Mar 13, 2003
1910.217 C01 I
- Issued
- Feb 14, 2003
- Abate by
- Apr 3, 2003
- Penalty
- Initial $455 · Current $455
1910.219 D01
- Issued
- Feb 14, 2003
- Abate by
- Mar 13, 2003
- Penalty
- Initial $490 · Current $490
1910.219 E01 I
- Issued
- Feb 14, 2003
- Abate by
- Mar 13, 2003
1910.219 E03 I
- Issued
- Feb 14, 2003
- Abate by
- Mar 13, 2003
1910.305 B02
- Issued
- Feb 14, 2003
- Abate by
- Mar 13, 2003
- Penalty
- Initial $490 · Current $490
1910.305 G02 III
- Issued
- Feb 14, 2003
- Abate by
- Mar 13, 2003
More inspections at ACE Anodizing & Impregnating, INC.
View ACE Anodizing & Impregnating, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332813)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 305974420.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.