AUBURN, NY —
OSHA Inspection: AUBURN METAL PROCESSING, LLC
Accident-driven inspection · Safety discipline
At a glance
On , OSHA opened an accident-driven safety inspection of AUBURN METAL PROCESSING, LLC in 6984 NORTH STREET ROAD, AUBURN, NY 13021 (NAICS 423930). OSHA activity number 310751961.
What this inspection record means
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Watch Auburn Metal Processing, LLC — free
Get an email when a new federal OSHA severe-injury report for Auburn Metal Processing, LLC is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- AUBURN METAL PROCESSING, LLC
- Site address
- 6984 NORTH STREET ROAD
- City
- AUBURN
- State
- NY
- ZIP
- 13021
- Mailing
- 6111 COCHRAN ROAD, SOLON, OH 44139
What kind of inspection was it?
- Inspection type
- Accident-driven (A)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 423930
- SIC code (legacy)
- 5093
- Employees
- 28
- Ownership type
- A
Citations
37 citations on file for this inspection.
5(a)(1)
- Issued
- Feb 7, 2008
- Abate by
- Feb 25, 2008
- Penalty
- Initial $1,500 · Current $1,050 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to THE HAZARD OF BEING CAUGHT IN: a)On or about 11/6/07, Throughout the Facility: Conveyor systems that are controlled from remote locations were not equipped with an audible and/ or visual warning devices prior to start up. Among other methods, one feasible and acceptable method to correct this hazard is to instal a warning system that alerts the workers prior to the start up of the conveyor system, as is required in American Society of Mechanical Engineers (ASME) B20.1, section 5.11.2. Abatement certification must be submitted for this item.
Recent events (2)
- — I (S) $1050.00
- — Z (S) $1500.00
1910.23 E04
- Issued
- Feb 7, 2008
- Abate by
- Feb 12, 2008
- Penalty
- Initial $1,200 · Current $840 Reduced
Recent events (2)
- — I (S) $840.00
- — Z (S) $1200.00
1910.37 A03
- Issued
- Feb 7, 2008
- Abate by
- Feb 12, 2008
- Penalty
- Initial $900 · Current $630 Reduced
Recent events (2)
- — I (S) $630.00
- — Z (S) $900.00
1910.106 E05 I
- Issued
- Feb 7, 2008
- Abate by
- Feb 12, 2008
- Penalty
- Initial $900 · Current $630 Reduced
Recent events (2)
- — I (S) $630.00
- — Z (S) $900.00
1910.110 F07
- Issued
- Feb 7, 2008
- Abate by
- Feb 12, 2008
Recent events (2)
- — I (S)
- — Z (S)
1910.157 C01
- Issued
- Feb 7, 2008
- Abate by
- Feb 12, 2008
Recent events (2)
- — I (S)
- — Z (S)
1910.132 D01
- Issued
- Feb 7, 2008
- Abate by
- Feb 12, 2008
- Penalty
- Initial $1,500 · Current $1,500
Recent events (2)
- — I (S) $1500.00
- — Z (S) $1500.00
1910.146 C01
- Issued
- Feb 7, 2008
- Abate by
- Mar 11, 2008
- Penalty
- Initial $1,500 · Current $1,050 Reduced
Recent events (2)
- — I (S) $1050.00
- — Z (S) $1500.00
1910.146 C02
- Issued
- Feb 7, 2008
- Abate by
- Feb 12, 2008
Recent events (2)
- — I (S)
- — Z (S)
1910.146 C04
- Issued
- Feb 7, 2008
- Abate by
- Mar 11, 2008
Recent events (2)
- — I (S)
- — Z (S)
1910.146 E01
- Issued
- Feb 7, 2008
- Abate by
- Mar 11, 2008
Recent events (2)
- — I (S)
- — Z (S)
1910.146 G01
- Issued
- Feb 7, 2008
- Abate by
- Mar 11, 2008
Recent events (2)
- — I (S)
- — Z (S)
1910.147 C05 I
- Issued
- Feb 7, 2008
- Abate by
- Feb 12, 2008
- Penalty
- Initial $1,500 · Current $1,050 Reduced
Recent events (2)
- — I (S) $1050.00
- — Z (S) $1500.00
1910.147 C04 I
- Issued
- Feb 7, 2008
- Abate by
- Feb 12, 2008
- Penalty
- Initial $3,000 · Current $2,100 Reduced
Recent events (2)
- — I (S) $2100.00
- — Z (S) $3000.00
1910.169 B03 I
- Issued
- Feb 7, 2008
- Abate by
- Feb 12, 2008
- Penalty
- Initial $1,200 · Current $840 Reduced
Recent events (2)
- — I (S) $840.00
- — Z (S) $1200.00
1910.169 B03 IV
- Issued
- Feb 7, 2008
- Abate by
- Feb 12, 2008
Recent events (2)
- — I (S)
- — Z (S)
1910.178 P01
- Issued
- Feb 7, 2008
- Abate by
- Feb 12, 2008
- Penalty
- Initial $1,200 · Current $840 Reduced
Recent events (2)
- — I (S) $840.00
- — Z (S) $1200.00
1910.178 Q01
- Issued
- Feb 7, 2008
- Abate by
- Feb 12, 2008
Recent events (2)
- — I (S)
- — Z (S)
1910.180 B02
- Issued
- Feb 7, 2008
- Abate by
- Feb 12, 2008
- Penalty
- Initial $1,200 · Current $840 Reduced
Recent events (2)
- — I (S) $840.00
- — Z (S) $1200.00
1910.180 G01 I
- Issued
- Feb 7, 2008
- Abate by
- Feb 12, 2008
Recent events (2)
- — I (S)
- — Z (S)
1910.180 G01 IV
- Issued
- Feb 7, 2008
- Abate by
- Feb 12, 2008
Recent events (2)
- — I (S)
- — Z (S)
1910.180 D02
- Issued
- Feb 7, 2008
- Abate by
- Feb 12, 2008
- Penalty
- Initial $1,200 · Current $840 Reduced
Recent events (2)
- — I (S) $840.00
- — Z (S) $1200.00
1910.180 G01 V
- Issued
- Feb 7, 2008
- Abate by
- Feb 12, 2008
Recent events (2)
- — I (S)
- — Z (S)
1910.219 C04 I
- Issued
- Feb 7, 2008
- Abate by
- Feb 12, 2008
- Penalty
- Initial $2,100 · Current $1,470 Reduced
Recent events (2)
- — I (S) $1470.00
- — Z (S) $2100.00
1910.219 C04 II
- Issued
- Feb 7, 2008
- Abate by
- Feb 12, 2008
Recent events (2)
- — I (S)
- — Z (S)
1910.219 D01
- Issued
- Feb 7, 2008
- Abate by
- Feb 12, 2008
- Penalty
- Initial $1,200 · Current $840 Reduced
Recent events (2)
- — I (S) $840.00
- — Z (S) $1200.00
1910.219 E03 I
- Issued
- Feb 7, 2008
- Abate by
- Feb 12, 2008
Recent events (2)
- — I (S)
- — Z (S)
1910.303 B01
- Issued
- Feb 7, 2008
- Abate by
- Feb 12, 2008
- Penalty
- Initial $1,500 · Current $1,050 Reduced
Recent events (2)
- — I (S) $1050.00
- — Z (S) $1500.00
1910.303 B02
- Issued
- Feb 7, 2008
- Abate by
- Feb 12, 2008
Recent events (2)
- — I (S)
- — Z (S)
1910.304 G05
- Issued
- Feb 7, 2008
- Abate by
- Feb 12, 2008
- Penalty
- Initial $1,500 · Current $1,050 Reduced
Recent events (2)
- — I (S) $1050.00
- — Z (S) $1500.00
5(a)(1)
- Issued
- Feb 7, 2008
- Abate by
- Feb 12, 2008
- Penalty
- Initial $3,000 · Current $2,100 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to THE HAZARD OF BEING STRUCK-BY: a)On or about 11/7/07, Outside: A Komatsu WA500 Loader and a Caterpillar 950F Loader used to move scrap metal, were equipped with non-functional reverse signal alarms. Among other methods, one feasible and acceptable method to correct this hazard is to have the audible reverse signal alarms replaced and maintained functional, in accordance with the Association of Equipment Manufactures (AEM) safety manual as well as the Manufacturers Operational Manual. Auburn Metal Processing, LLC was previously cited for a violation of this Occupational Safety and Health Standard or its equivalent standard, Section 5(a)(1) which was contained in OSHA Inspection number 309377935, Citation 1, Item 1, issued on 02/16/06, with respect to a workplace located at 6984 North Street Road, Auburn, New York.n,
Recent events (2)
- — I (R) $2100.00
- — Z (R) $3000.00
1910.23 C01
- Issued
- Feb 7, 2008
- Abate by
- Feb 12, 2008
- Penalty
- Initial $6,000 · Current $4,200 Reduced
Recent events (2)
- — I (R) $4200.00
- — Z (R) $6000.00
1910.24 H
- Issued
- Feb 7, 2008
- Abate by
- Feb 12, 2008
- Penalty
- Initial $2,400 · Current $1,680 Reduced
Recent events (2)
- — I (R) $1680.00
- — Z (R) $2400.00
1910.157 C04
- Issued
- Feb 7, 2008
- Abate by
- Feb 12, 2008
- Penalty
- Initial $1,800 · Current $1,260 Reduced
Recent events (2)
- — I (R) $1260.00
- — Z (R) $1800.00
1910.212 A01
- Issued
- Feb 7, 2008
- Abate by
- Mar 11, 2008
- Penalty
- Initial $6,000 · Current $4,200 Reduced
Recent events (2)
- — I (R) $4200.00
- — Z (R) $6000.00
1910.242 B
- Issued
- Feb 7, 2008
- Abate by
- Feb 12, 2008
- Penalty
- Initial $1,800 · Current $1,260 Reduced
Recent events (2)
- — I (R) $1260.00
- — Z (R) $1800.00
1910.305 G01 III
- Issued
- Feb 7, 2008
- Abate by
- Feb 12, 2008
Recent events (2)
- — I (O)
- — Z (O)
More inspections at Auburn Metal Processing, LLC
View Auburn Metal Processing, LLC's full OSHA safety record →
More inspections in this industry (NAICS 423930)
Jul 16, 2026
Strong Steel Products, LLC · DETROIT, MI
Jul 15, 2026
Strong Steel Products, LLC · DETROIT, MI
Jul 14, 2026
A09cs000012tehvaaq - Post Metal Recycling · ROCK VALLEY, IA
Jul 10, 2026
Tear a Part Auto Recycling · OGDEN, UT
Jul 9, 2026
161490 - Carolina Metal Recyclers, LLC · GARNER, NC
More inspections in NY
Jul 17, 2026
Sullivan County Care Center at Sunset Lake · LIBERTY, NY
Jul 17, 2026
Vergara Electrical LLC · NEW YORK, NY
Jul 17, 2026
Apple Converting, INC. · ONEONTA, NY
Jul 17, 2026
Namicela Home Solutions INC · SYRACUSE, NY
Jul 17, 2026
Cranesville Block CO., INC. · SYRACUSE, NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 310751961.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.