CORTLAND, NY —
OSHA Inspection: DISTRIBUTOR DATA FORMS, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of DISTRIBUTOR DATA FORMS, INC. in 362 ROUTE 13 SOUTH, CORTLAND, NY 13045 (NAICS 323116). OSHA activity number 314346966.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DISTRIBUTOR DATA FORMS, INC.
- Site address
- 362 ROUTE 13 SOUTH
- City
- CORTLAND
- State
- NY
- ZIP
- 13045
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 323116
- SIC code (legacy)
- 2761
- Employees
- 9
- Ownership type
- A
Citations
22 citations on file for this inspection.
5(a)(1)
- Issued
- Oct 15, 2010
- Abate by
- Nov 17, 2010
- Penalty
- Initial $750 · Current $750
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the hazard of being struck by the load should the overhead hoist, below-the- hook lifting device or bridge rail fail: a)Bindery, on or about 8/25/10: A 1/4 ton Coffing overhead hoist at the Hamilton #1 collator had no safety latches at the lifting hook and at the hook that attaches the hoist to the trolley and a one ton overhead hand chain hoist at the Form Flo continuous collator had a broken safety latch at the lifting hook and no safety latch where the hook attaches the hoist to the trolley. Also, no inspections were conducted on the overhead hoists. Among other methods, feasible and acceptable abatement methods to correct these hazards are to: 1.Install safety latches on the hooks in accordance with ANSI B30.16-1993, Section 16-1.2.9. 2.Conduct frequent and periodic inspections of the overhead hoists in accordance with ANSI B30.16-1993, Section 16-2.1. b)Bindery, on or about 8/25/10: A below-the-hook lifting device used for lifting rolls of paper at the Hamilton #1 collator had no rated load capacity markings on the device and had not been inspected. Among other methods, feasible and acceptable abatement methods to correct these hazards are to: 1.Mark the rated load of the lifting device on the main structure or equivalent in accordance with ASME B30.20-1993, Section 20-1.2.1. 2.Inspect the device in accordance with ASME B30.20-1993, Section 20-1.3. c)Bindery, on or about 8/25/10: A bridge rail at the Form Flo continuous collator with a one ton overhead hand chain hoist attached and a bridge rail at the Hamilton #1 collator with a 1/4 ton Coffing overhead hoist attached did not have rated load markings on them. Among other methods, one feasible and acceptable abatement method to correct this hazard is to: 1.Mark the rated load markings on the bridge rail. Abatement certification must be submitted for this item.
1910.23 C01
- Issued
- Oct 15, 2010
- Abate by
- Nov 17, 2010
- Penalty
- Initial $750 · Current $750
1910.23 D01 I
- Issued
- Oct 15, 2010
- Abate by
- Nov 17, 2010
1910.106 E02 IVD
- Issued
- Oct 15, 2010
- Abate by
- Nov 17, 2010
- Penalty
- Initial $750 · Current $750
1910.106 E02 IVA
- Issued
- Oct 15, 2010
- Abate by
- Nov 17, 2010
1910.106 E09 I
- Issued
- Oct 15, 2010
- Abate by
- Nov 17, 2010
1910.147 C01
- Issued
- Oct 15, 2010
- Abate by
- Nov 17, 2010
- Penalty
- Initial $750 · Current $750
1910.157 G02
- Issued
- Oct 15, 2010
- Abate by
- Nov 17, 2010
- Penalty
- Initial $450 · Current $450
1910.178 L01 I
- Issued
- Oct 15, 2010
- Abate by
- Nov 17, 2010
- Penalty
- Initial $750 · Current $750
1910.212 A01
- Issued
- Oct 15, 2010
- Abate by
- Nov 17, 2010
- Penalty
- Initial $750 · Current $750
1910.212 A03 II
- Issued
- Oct 15, 2010
- Abate by
- Nov 17, 2010
- Penalty
- Initial $750 · Current $750
1910.212 A05
- Issued
- Oct 15, 2010
- Abate by
- Nov 17, 2010
- Penalty
- Initial $750 · Current $750
1910.212 B
- Issued
- Oct 15, 2010
- Abate by
- Nov 17, 2010
- Penalty
- Initial $450 · Current $450
1910.219 C02 I
- Issued
- Oct 15, 2010
- Abate by
- Nov 17, 2010
- Penalty
- Initial $750 · Current $750
1910.219 D01
- Issued
- Oct 15, 2010
- Abate by
- Nov 17, 2010
- Penalty
- Initial $750 · Current $750
1910.219 E03 I
- Issued
- Oct 15, 2010
- Abate by
- Nov 17, 2010
1910.219 F01
- Issued
- Oct 15, 2010
- Abate by
- Nov 17, 2010
- Penalty
- Initial $750 · Current $750
1910.219 F03
- Issued
- Oct 15, 2010
- Abate by
- Nov 17, 2010
- Penalty
- Initial $750 · Current $750
1910.303 G02 I
- Issued
- Oct 15, 2010
- Abate by
- Nov 17, 2010
- Penalty
- Initial $750 · Current $750
1910.305 G01 IVA
- Issued
- Oct 15, 2010
- Abate by
- Nov 17, 2010
- Penalty
- Initial $450 · Current $450
1910.1200 E01
- Issued
- Oct 15, 2010
- Abate by
- Nov 17, 2010
- Penalty
- Initial $450 · Current $450
1910.1200 H01
- Issued
- Oct 15, 2010
- Abate by
- Nov 17, 2010
More inspections at Distributor Data Forms, INC.
View Distributor Data Forms, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 323116)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 314346966.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.