EVANSTON, WY —
OSHA Inspection: SILVER EAGLE REFINING INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of SILVER EAGLE REFINING INC. in 2990 COUNTY RD 180, EVANSTON, WY 82930 (NAICS 324110). OSHA activity number 314510710.
What this inspection record means
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Watch Silver Eagle Refining INC. — free
Get an email when a new federal OSHA severe-injury report for Silver Eagle Refining INC. is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- SILVER EAGLE REFINING INC.
- Site address
- 2990 COUNTY RD 180
- City
- EVANSTON
- State
- WY
- ZIP
- 82930
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 324110
- SIC code (legacy)
- 2911
- Employees
- 35
- Ownership type
- A
- Industry flags
- Manufacturing health.
Citations
81 citations on file for this inspection.
1910.22 A01
- Issued
- Sep 13, 2012
- Abate by
- Sep 18, 2012
- Penalty
- Initial $3,443 · Current $1,148 Reduced
General-duty citation text
1910.22(a)(1) * All places of employment, passageways, storerooms, and service rooms shall be kept clean and orderly and in a sanitary condition. Inadequate Housekeeping (miscellaneous boxes, drums, spare parts, etc) was found in the following area: 1. Maintenance Shop - Back. 2. Maintenance Shop - Middle. 3. Maintenance Shop - Front. 4. Outside Maintenance building. 5. Process Unit. 6. Lab. 7. Emergency Shower/Eye Wash areas used for storage of equipment in Process Unit. 8. HVAC Room. 9. Wooden floor damaged in Fire Pump building.
Recent events (2)
- — I (S) $1148.00
- — Z (S) $3443.00
1910.23 A02
- Issued
- Sep 13, 2012
- Abate by
- Sep 18, 2012
- Penalty
- Initial $3,443
General-duty citation text
1910.23(a)(2) * Every ladderway floor opening or platform shall be guarded by a standard railing with standard toeboard on all exposed sides (except at entrance to opening), with the passage through the railing either provided with a swinging gate or so offset that a person cannot walk directly into the opening. Catwalks missing end railing on process Unit and Tank Farm. 1. Tank 116 Loading Rack - Backside. 2. DIP Rack. 3. A341 Rack.
Recent events (2)
- — I (S)
- — Z (S) $3443.00
1910.23 A08 II
- Issued
- Sep 13, 2012
- Abate by
- Oct 9, 2012
General-duty citation text
1910.23(a)(8)(ii) * Every floor hole into which persons can accidentally walk shall be guarded by either: A floor hole cover of standard strength and construction. While the cover is not in place, the floor hole shall be constantly attended by someone or shall be protected by a removable standard railing. Drains in Process Unit not adequately guarded. Approximately 6" diameter.
Recent events (2)
- — I (O)
- — Z (S)
1910.26 A02 I
- Issued
- Sep 13, 2012
- Abate by
- Sep 18, 2012
- Penalty
- Initial $3,443 · Current $1,148 Reduced
General-duty citation text
1910.26(a)(2)(i) * "General specifications - straight and extension ladders." The minimum width between side rails of a straight ladder or any section of an extension ladder shall be 12 inches. Rebar ladder does not meet the minimum width requirements. 10" wide.
Recent events (2)
- — I (O) $1148.00
- — Z (S) $3443.00
1910.26 C02 IV
- Issued
- Sep 13, 2012
- Abate by
- Sep 18, 2012
General-duty citation text
1910.26(c)(2)(iv) * "Care of ladders." Ladders must be maintained in good usable condition at all times. Damaged or improperly maintained ladders in Process Unit. Broken ladder (missing foot and half of an extension ladder) in the HDS Heater area.
Recent events (2)
- — I (S)
- — Z (S)
1910.26 C02 VID
- Issued
- Sep 13, 2012
- Abate by
- Sep 18, 2012
General-duty citation text
1910.26(c)(2)(vi)(d) * "Care of ladders." If ladders are exposed to oil and grease, equipment should be cleaned of oil, grease, or slippery materials. This can easily be done with a solvent or steam cleaning. Oily/dirty portable ladder in Process Unit. DIP ladder.
Recent events (2)
- — I (S)
- — Z (S)
1910.28 A02
- Issued
- Sep 13, 2012
- Abate by
- Sep 18, 2012
- Penalty
- Initial $3,443
General-duty citation text
1910.28(a)(2) * "General requirements for all scaffolds." The footing or anchorage for scaffolds shall be sound, rigid, and capable of carrying the maximum intended load without settling or displacement. Unstable objects such as barrels, boxes, loose brick, or concrete blocks shall not be used to support scaffolds or planks. Scaffolding missing base plates in Catalyst Unit.
Recent events (2)
- — I (O)
- — Z (S) $3443.00
1910.95 G05 I
- Issued
- Sep 13, 2012
- Abate by
- Sep 18, 2012
- Penalty
- Initial $3,443
General-duty citation text
1910.95(g)(5)(i) * "Baseline audiogram." Within 6 months of an employee's first exposure at or above the action level, the employer shall establish a valid baseline audiogram against which subsequent audiograms can be compared. Employer did not ensure that all employees had received baseline audiograms.
Recent events (2)
- — I (S)
- — Z (S) $3443.00
1910.95 G06
- Issued
- Sep 13, 2012
- Abate by
- Sep 18, 2012
General-duty citation text
1910.95(g)(6) * "Annual audiogram." At least annually after obtaining the baseline audiogram, the employer shall obtain a new audiogram for each employee exposed at or above an 8-hour time-weighted average of 85 decibels. Employer did not ensure that all employees received annual audiograms.
Recent events (2)
- — I (S)
- — Z (S)
1910.95 K01
- Issued
- Sep 13, 2012
- Abate by
- Oct 9, 2012
General-duty citation text
1910.95(k)(1) * "Training program." The employer shall train each employee who is exposed to noise at or above an 8-hour time weighted average of 85 decibels in accordance with the requirements of this section. The employer shall institute a training program and ensure employee participation in the program. Employer did not adequately train the employees on Hearing Protection Program. Site specific training not accomplished.
Recent events (2)
- — I (S)
- — Z (S)
1910.101 B
- Issued
- Sep 13, 2012
- Abate by
- Sep 18, 2012
- Penalty
- Initial $3,443 · Current $1,148 Reduced
General-duty citation text
1910.101(b) * "Compressed gases." The in-plant handling, storage, and utilization of all compressed gases in cylinders, portable tanks, rail tankcars, or motor vehicle cargo tanks shall be in accordance with Compressed Gas Association Pamphlet P-1-1965, which is incorporated by reference as specified in Sec. 1910.6. Improper storage of compressed gas cylinders in facility. 1. Oxygen and Acetylene cylinders stored together outside of Maintenance Shop. 2. Improper storage of SCBA cylinders in Maintenance Shop - Back. 3. Cylinder on side in back of vehicle - Operators vehicle. 4. Cylinders in Lab partially blocking access/egress door.
Recent events (2)
- — I (S) $1148.00
- — Z (S) $3443.00
1910.106 H07 IIIC
- Issued
- Sep 13, 2012
- Abate by
- Sep 18, 2012
- Penalty
- Initial $3,443 · Current $1,148 Reduced
General-duty citation text
1910.106(h)(7)(iii)(c) * Locations where flammable vapor-air mixtures may exist under abnormal conditions and for a distance beyond Division 1 locations shall be classified Division 2 according to the requirements of subpart S of this part. These locations include an area within 20 feet horizontally, 3 feet vertically beyond a Division 1 area, and up to 3 feet above floor or grade level within 25 feet, if indoors, or 10 feet if outdoors, from any pump, bleeder, withdrawal fitting, meter, or similar device handling Category 1 or 2 flammable liquids, or Category 3 flammable liquids with a flashpoint below 100 F . Pits provided with adequate mechanical ventilation within a Division 1 or 2 area shall be classified Division 2. If Category 3 flammable liquids with a flashpoint at or above 100 F or Category 4 flammable liquids only are handled, then ordinary electrical equipment is satisfactory though care shall be used in locating electrical apparatus to prevent hot metal from falling into open equipment. Electrical equipment not maintained in intrinsically safe areas. 1. Class I Division II electrical boxes (2) missing bolts in Process Unit. 2. Missing cover panels on: AC Unit in Lab, heaters in utility closet. 3. Light cover missing in Class I Division II location on Process Tower in Process Unit.
Recent events (2)
- — I (S) $1148.00
- — Z (S) $3443.00
1910.110 D10
- Issued
- Sep 13, 2012
- Abate by
- Sep 18, 2012
- Penalty
- Initial $3,443 · Current $1,148 Reduced
General-duty citation text
1910.110(d)(10) * Damage from vehicles. When damage to LP-Gas systems from vehicular traffic is a possibility, precautions against such damage shall be taken. Outside propane tanks not protected from vehicular traffic (Lower parking lot and by Fire Pump building).
Recent events (2)
- — I (S) $1148.00
- — Z (S) $3443.00
1910.132 D01
- Issued
- Sep 13, 2012
- Abate by
- Oct 9, 2012
- Penalty
- Initial $3,443 · Current $1,148 Reduced
General-duty citation text
1910.132(d)(1) * Hazard assessment and equipment selection. The employer shall assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE). Personal Protective Equipment Hazard Assessment not completed for facility by employer.
Recent events (2)
- — I (O) $1148.00
- — Z (S) $3443.00
1910.132 D02
- Issued
- Sep 13, 2012
- Abate by
- Oct 9, 2012
General-duty citation text
1910.132(d)(2) * The employer shall verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated; the person certifying that the evaluation has been performed; the date(s) of the hazard assessment; and, which identifies the document as a certification of hazard assessment. Personal Protective Equipment Hazard Assessment certification not completed for facility by employer.
Recent events (2)
- — I (O)
- — Z (S)
1910.132 E
- Issued
- Sep 13, 2012
- Abate by
- Oct 9, 2012
General-duty citation text
1910.132(e) * Defective and damaged equipment. Defective or damaged personal protective equipment shall not be used. Personal Protective Equipment not being maintained in work area. 1. Dirty / scratched face shield -Maintenance Shop. 2. Broken strap on safety goggles - Maintenance Shop. 3. Dirty welding goggles - Maintenance Shop. 4. Dirty / damaged PPE stored in Emergency Shower / Eye wash area in Process Unit.
Recent events (2)
- — I (S)
- — Z (S)
1910.132 F01
- Issued
- Sep 13, 2012
- Abate by
- Oct 9, 2012
General-duty citation text
1910.132(f)(1) * Training. The employer shall provide training to each employee who is required by this section to use PPE. Employer did not adequately train the employees on use of Personal Protective Equipment. Site specific training not accomplished.
Recent events (2)
- — I (S)
- — Z (S)
1910.134 C02
- Issued
- Sep 13, 2012
- Abate by
- Oct 9, 2012
- Penalty
- Initial $3,443 · Current $1,148 Reduced
General-duty citation text
1910.134(c)(2) * Respiratory protection program. This paragraph requires the employer to develop and implement a written respiratory protection program with required worksite- specific procedures and elements for required respirator use. The program must be administered by a suitably trained program administrator. In addition, certain program elements may be required for voluntary use to prevent potential hazards associated with the use of the respirator. Where respirator use is not required. Respiratory Protection program did not address where respirator use was or was not required.
Recent events (2)
- — I (S) $1148.00
- — Z (S) $3443.00
1910.134 E01
- Issued
- Sep 13, 2012
- Abate by
- Oct 9, 2012
General-duty citation text
1910.134(e)(1) * General. The employer shall provide a medical evaluation to determine the employee's ability to use a respirator, before the employee is fit tested or required to use the respirator in the workplace. The employer may discontinue an employee's medical evaluations when the employee is no longer required to use a respirator. Employer did not ensure that all employees had received a medical evaluation for respirator use.
Recent events (2)
- — I (O)
- — Z (S)
1910.134 F02
- Issued
- Sep 13, 2012
- Abate by
- Oct 9, 2012
General-duty citation text
1910.134(f)(2) * The employer shall ensure that an employee using a tight-fitting facepiece respirator is fit tested prior to initial use of the respirator, whenever a different respirator facepiece (size, style, model or make) is used, and at least annually thereafter. Employer did not ensure that annual fit-testing of respirators for employees were completed. All employees expired Feb 2012.
Recent events (2)
- — I (O)
- — Z (S)
1910.134 G03 III
- Issued
- Sep 13, 2012
- Abate by
- Oct 9, 2012
General-duty citation text
1910.134(g)(3)(iii) * Procedures for IDLH atmospheres. For all IDLH atmospheres, the employer shall ensure that: The employee(s) located outside the IDLH atmosphere are trained and equipped to provide effective emergency rescue; Employer did not establish procedures for IDLH atmospheres. Employer did not ensure that employees located outside the IDLH atmosphere are trained and equipped to provide effective rescue.
Recent events (2)
- — I (O)
- — Z (S)
1910.134 H02 I
- Issued
- Sep 13, 2012
- Abate by
- Sep 18, 2012
General-duty citation text
1910.134(h)(2)(i) * Storage. The employer shall ensure that respirators are stored as follows: All respirators shall be stored to protect them from damage, contamination, dust, sunlight, extreme temperatures, excessive moisture, and damaging chemicals, and they shall be packed or stored to prevent deformation of the facepiece and exhalation valve. Employer did not ensure the proper storage of respirators in Maintenance Shop - Back.
Recent events (2)
- — I (S)
- — Z (S)
1910.134 H03 IB
- Issued
- Sep 13, 2012
- Abate by
- Sep 18, 2012
General-duty citation text
1910.134(h)(3)(i)(B) * Inspection. All respirators maintained for use in emergency situations shall be inspected at least monthly and in accordance with the manufacturer's recommendations, and shall be checked for proper function before and after each use; Employer did not ensure that airline respirator was checked at least monthly and that it has a low air alarm in Control Room.
Recent events (2)
- — I (S)
- — Z (S)
1910.134 K01 I
- Issued
- Sep 13, 2012
- Abate by
- Oct 9, 2012
General-duty citation text
1910.134(k)(1)(i) * The employer shall ensure that each employee can demonstrate knowledge of at least the following: Why the respirator is necessary and how improper fit, usage, or maintenance can compromise the protective effect of the respirator; The employer did not adequately train the employees on Respiratory Protection Program. Site specific training not accomplished.
Recent events (2)
- — I (S)
- — Z (S)
1910.134 L01
- Issued
- Sep 13, 2012
- Abate by
- Oct 9, 2012
General-duty citation text
1910.134(l)(1) * The employer shall conduct evaluations of the workplace as necessary to ensure that the provisions of the current written program are being effectively implemented and that it continues to be effective. Respiratory Protection program was not reviewed and/or updated regularly by employer.
Recent events (2)
- — I (S)
- — Z (S)
1910.144 A03
- Issued
- Sep 13, 2012
- Abate by
- Sep 18, 2012
- Penalty
- Initial $2,066
General-duty citation text
1910.144(a)(3) * Yellow. Yellow shall be the basic color for designating caution and for marking physical hazards such as: Striking against, stumbling, falling, tripping, and "caught in between." Physical hazards such as: curbing, pipe supports, low piping, etc. was not identified with yellow paint or equivalent, throughout Process Unit.
Recent events (2)
- — I (O)
- — Z (S) $2066.00
1910.146 C02
- Issued
- Sep 13, 2012
- Abate by
- Mar 29, 2013
- Penalty
- Initial $3,443 · Current $1,148 Reduced
General-duty citation text
1910.146(c)(2) * General requirements. If the workplace contains permit spaces, the employer shall inform exposed employees, by posting danger signs or by any other equally effective means, of the existence and location of and the danger posed by the permit spaces. NOTE: A sign reading DANGER -- PERMIT-REQUIRED CONFINED SPACE, DO NOT ENTER or using other similar language would satisfy the requirement for a sign. Confined Space Areas not properly marked or labeled: 1. Product Storage Tanks. 2. Process Vessels. 3. Process Towers
Recent events (2)
- — I (S) $1148.00
- — Z (S) $3443.00
1910.146 D04 VIII
- Issued
- Sep 13, 2012
- Abate by
- Sep 18, 2012
General-duty citation text
1910.146(d)(4)(viii) * Permit-required confined space program (permit space program). Under the permit space program required by paragraph (c)(4) of this section, the employer shall: Provide the following equipment (specified in paragraphs (d)(4)(i) through (d)(4)(ix) of this section) at no cost to employees, maintain that equipment properly, and ensure that employees use that equipment properly: Rescue and emergency equipment needed to comply with paragraph (d)(9) of this section, except to the extent that the equipment is provided by rescue services; Emergency equipment not maintained or inspected by employer. 1. Confined Space rescue equipment - Maintenance Shop-Back. 2. SCBA in case in Process Unit building. 3. Fire hose and fittings in equipment box south of Process Unit.
Recent events (2)
- — I (S)
- — Z (S)
1910.146 D09
- Issued
- Sep 13, 2012
- Abate by
- Oct 9, 2012
General-duty citation text
1910.146(d)(9) * Permit-required confined space program (permit space program). Under the permit space program required by paragraph (c)(4) of this section, the employer shall: Develop and implement procedures for summoning rescue and emergency services, for rescuing entrants from permit spaces, for providing necessary emergency services to rescued employees, and for preventing unauthorized personnel from attempting a rescue; Employer did not develop and implement procedures for summoning rescue and emergency services, for rescuing entrants from confined spaces, for providing necessary emergency services to rescued employees, and for preventing unauthorized personnel from attempting a rescue.
Recent events (2)
- — I (S)
- — Z (S)
1910.146 D14
- Issued
- Sep 13, 2012
- Abate by
- Oct 9, 2012
General-duty citation text
1910.146(d)(14) * Permit-required confined space program (permit space program). Under the permit space program required by paragraph (c)(4) of this section, the employer shall: Review the permit space program, using the canceled permits retained under paragraph (e)(6) of this section within 1 year after each entry and revise the program as necessary, to ensure that employees participating in entry operations are protected from permit space hazards. Confined Space program not reviewed and/or updated annually by employer.
Recent events (2)
- — I (O)
- — Z (S)
1910.146 G01
- Issued
- Sep 13, 2012
- Abate by
- Oct 9, 2012
General-duty citation text
1910.146(g)(1) * Training. The employer shall provide training so that all employees whose work is regulated by this section acquire the understanding, knowledge, and skills necessary for the safe performance of the duties assigned under this section. The employer did not adequately train the employees on Confined Space Program. Site specific training not accomplished.
Recent events (2)
- — I (O)
- — Z (S)
1910.151 B
- Issued
- Sep 13, 2012
- Abate by
- Sep 18, 2012
- Penalty
- Initial $3,443
General-duty citation text
1910.151(b) * In the absence of an infirmary, clinic, or hospital in near proximity to the workplace which is used for the treatment of all injured employees, a person or persons shall be adequately trained to render first aid. Adequate first aid supplies shall be readily available. The employer did not have personnel adequately trained in first aid at the facility.
Recent events (2)
- — I (O)
- — Z (S) $3443.00
1910.151 C
- Issued
- Sep 13, 2012
- Abate by
- Sep 18, 2012
General-duty citation text
1910.151(c) * Where the eyes or body of any person may be exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body shall be provided within the work area for immediate emergency use. Inadequate inspection and maintenance of emergency eye wash / shower stations. 1. No weekly or monthly checks - Laboratory and Process Unit. 2. Showers for decontamination not working properly in Process Unit (Middle). 3. Inadequate emergency eyewash / shower for Lab personnel. Requires two valves to be opened to use.
Recent events (2)
- — I (O)
- — Z (S)
1910.157 C01
- Issued
- Sep 13, 2012
- Abate by
- Sep 18, 2012
- Penalty
- Initial $2,066
General-duty citation text
1910.157(c)(1) * General requirements. The employer shall provide portable fire extinguishers and shall mount, locate and identify them so that they are readily accessible to employees without subjecting the employees to possible injury. Fire extinguishers not mounted or identified. 1. Truck Loading Rack. 2. Maintenance Shop.
Recent events (2)
- — I (O)
- — Z (S) $2066.00
1910.157 C04
- Issued
- Sep 13, 2012
- Abate by
- Oct 9, 2012
General-duty citation text
1910.157(c)(4) * General requirements. The employer shall assure that portable fire extinguishers are maintained in a fully charged and operable condition and kept in their designated places at all times except during use. Wheeled fire extinguisher (Ansul) was not adequately maintained on Process Unit. Out of pressure range.
Recent events (2)
- — I (S)
- — Z (S)
1910.157 F05
- Issued
- Sep 13, 2012
- Abate by
- Sep 18, 2012
General-duty citation text
1910.157(f)(5) * Hydrostatic testing. The employer shall assure that hydrostatic tests are performed on extinguisher hose assemblies which are equipped with a shut-off nozzle at the discharge end of the hose. The test interval shall be the same as specified for the extinguisher on which the hose is installed. The employer did not assure that hydrostatic tests were conducted on hose assemblies on Foam Trailer.
Recent events (2)
- — I (O)
- — Z (S)
1910.179 B05
- Issued
- Sep 13, 2012
- Abate by
- Sep 18, 2012
- Penalty
- Initial $3,443 · Current $1,148 Reduced
General-duty citation text
1910.179(b)(5) * General requirements - Rated load marking. The rated load of the crane shall be plainly marked on each side of the crane, and if the crane has more than one hoisting unit, each hoist shall have its rated load marked on it or its load block and this marking shall be clearly legible from the ground or floor. Hoists in facility did not have rated load marked. 1. "A" frame not load tested or marked with load limit in Maintenance Shop. 2. "I" beam not load tested or marked with load limit in Knock Engine room. 3. "I" beam not load tested or marked with load limit in Process Unit.
Recent events (2)
- — I (S) $1148.00
- — Z (S) $3443.00
1910.212 A01
- Issued
- Sep 13, 2012
- Abate by
- Sep 18, 2012
- Penalty
- Initial $3,443 · Current $1,148 Reduced
General-duty citation text
1910.212(a)(1) * Machine guarding. Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are-barrier guards, two-hand tripping devices,electronic safety devices, etc. Inadequate guarding of rotating equipment in the facility. 1. Pump shafts not properly guarded throughout Process Unit. 2. Pump shafts not properly guarded throughout Product Storage Tank area. 3. Pump shafts not properly guarded in Truck Loading Area. 4. Compressors not properly guarded in Process Unit.
Recent events (2)
- — I (S) $1148.00
- — Z (S) $3443.00
1910.242 B
- Issued
- Sep 13, 2012
- Abate by
- Sep 18, 2012
- Penalty
- Initial $2,066 · Current $1,148 Reduced
General-duty citation text
1910.242(b) * Compressed air used for cleaning. Compressed air shall not be used for cleaning purposes except where reduced to less than 30 p.s.i. and then only with effective chip guarding and personal protective equipment. Compressed air used for cleaning and improper air nozzle being used. Airgun not regulated to 30 psi in Maintenance Shop.
Recent events (2)
- — I (S) $1148.00
- — Z (S) $2066.00
1910.243 C01 IIA
- Issued
- Sep 13, 2012
- Abate by
- Sep 18, 2012
- Penalty
- Initial $3,443 · Current $1,148 Reduced
General-duty citation text
1910.243(c)(1)(ii)(a) * General requirements. Abrasive wheels shall be used only on machine provided with safety guards as defined in paragraph (c) (1) through (4) of this section. A safety guard shall cover the spindle end, nut and flange projections. The safety guard shall be mounted so as to maintain proper alignment with the wheel, and the strength of the fastenings shall exceed the strength of the guard. Missing guard on angle grinder (handheld) in Maintenance Shop.
Recent events (2)
- — I (S) $1148.00
- — Z (S) $3443.00
1910.252 A01 I
- Issued
- Sep 13, 2012
- Abate by
- Sep 18, 2012
- Penalty
- Initial $3,443 · Current $1,148 Reduced
General-duty citation text
1910.252(a)(1)(i) * Fire prevention and protection. Fire hazards. If the object to be welded or cut cannot readily be moved, all movable fire hazards in the vicinity shall be taken to a safe place. Flammables / combustibles located next to welding area in Maintenance Shop.
Recent events (2)
- — I (S) $1148.00
- — Z (S) $3443.00
1910.252 A02 IV
- Issued
- Sep 13, 2012
- Abate by
- Sep 18, 2012
General-duty citation text
1910.252(a)(2)(iv) * Authorization. Before cutting or welding is permitted, the area shall be inspected by the individual responsible for authorizing cutting and welding operations. He shall designate precautions to be followed in granting authorization to proceed preferably in the form of a written permit. Welding area not inspected by management for hazards in Maintenance Shop.
Recent events (2)
- — I (S)
- — Z (S)
1910.253 B04 III
- Issued
- Sep 13, 2012
- Abate by
- Sep 18, 2012
- Penalty
- Initial $3,443 · Current $1,148 Reduced
General-duty citation text
1910.253(b)(4)(iii) * Oxygen storage. Oxygen cylinders in storage shall be separated from fuel-gas cylinders or combustible materials (especially oil or grease), a minimum distance of 20 feet or by a noncombustible barrier at least 5 feet high having a fire-resistance rating of at least one-half hour. Oxygen cylinders stored near highly combustible materials (oils and grease) in Maintenance Shop - Back.
Recent events (2)
- — I (S) $1148.00
- — Z (S) $3443.00
1910.253 E03 IIC3
- Issued
- Sep 13, 2012
- Abate by
- Sep 18, 2012
General-duty citation text
1910.253(e)(3)(ii)(C)(3) * Piping protective equipment. Flash-back protection shall be provided by an approved device that will prevent flame from passing into the fuel-gas system. Backflow protection was not provided on gas welding equipment in Maintenance Shop.
Recent events (2)
- — I (S)
- — Z (S)
1910.303 B02
- Issued
- Sep 13, 2012
- Abate by
- Sep 18, 2012
- Penalty
- Initial $3,443 · Current $1,148 Reduced
General-duty citation text
1910.303(b)(2) * Installation and use. Listed or labeled equipment shall be installed and used in accordance with any instructions included in the listing or labeling. Incorrect use of electrical equipment. Non UL rated power strip mounted to workbench in I&E Shop.ench
Recent events (2)
- — I (S) $1148.00
- — Z (S) $3443.00
1910.303 B07 I
- Issued
- Sep 13, 2012
- Abate by
- Oct 9, 2012
General-duty citation text
1910.303(b)(7)(i) * Unused openings in boxes, raceways, auxiliary gutters, cabinets, equipment cases, or housings shall be effectively closed to afford protection substantially equivalent to the wall of the equipment. Electrical boxes/panels missing knockouts. 1. Electrical panel on Knock Engine. 2. Electrical receptacle in Maintenance Shop.
Recent events (2)
- — I (S)
- — Z (S)
1910.303 B08
- Issued
- Sep 13, 2012
- Abate by
- Sep 18, 2012
General-duty citation text
1910.303(b)(8) * Electric equipment shall be firmly secured to the surface on which it is mounted. Electrical outlet box not securely fastened in Fire Pump building.
Recent events (2)
- — I (S)
- — Z (S)
1910.303 F01
- Issued
- Sep 13, 2012
- Abate by
- Sep 18, 2012
General-duty citation text
1910.303(f)(1) * Motors and appliances. Each disconnecting means required by this subpart for motors and appliances shall be legibly marked to indicate its purpose, unless located and arranged so the purpose is evident. Electrical service disconnect in Maintenance Shop not marked identifying purpose.
Recent events (2)
- — I (S)
- — Z (S)
1910.303 F02
- Issued
- Sep 13, 2012
- Abate by
- Sep 18, 2012
General-duty citation text
1910.303(f)(2) * Services, feeders, and branch circuits. Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, shall be legibly marked to indicate its purpose, unless located and arranged so the purpose is evident. Electrical service panels not marked to identify purpose. 1. Electrical panel Maintenance Shop. 2. Electrical panel in Pump building. 3. Electrical panel in Process Unit building
Recent events (2)
- — I (S)
- — Z (S)
1910.303 G01
- Issued
- Sep 13, 2012
- Abate by
- Sep 18, 2012
General-duty citation text
1910.303(g)(1) * Space about electric equipment. Sufficient access and working space shall be provided and maintained about all electric equipment to permit ready and safe operation and maintenance of such equipment. Electrical service panels not provided with adequate space for safe operation and maintenance. Electrical service disconnects blocked by equipment and table in the Maintenance Shop.
Recent events (2)
- — I (S)
- — Z (S)
1910.303 G02 I
- Issued
- Sep 13, 2012
- Abate by
- Oct 9, 2012
General-duty citation text
1910.303(g)(2)(i) * Guarding of live parts. Except as elsewhere required or permitted by this standard, live parts of electric equipment operating at 50 volts or more shall be guarded against accidental contact by use of approved cabinets or other forms of approved enclosures or by any of the following means: Electrical equipment not adequately guarded. Electrical panel missing cover in Fire Pump building.l
Recent events (2)
- — I (S)
- — Z (S)
1910.305 A02 IX
- Issued
- Sep 13, 2012
- Abate by
- Sep 18, 2012
- Penalty
- Initial $3,443 · Current $1,148 Reduced
General-duty citation text
1910.305(a)(2)(ix) * All lamps for general illumination shall be protected from accidental contact or breakage by a suitable fixture or lampholder with a guard. Brass shell, paper-lined sockets, or other metal-cased sockets may not be used unless the shell is grounded. Bench light over drill press not protected from accidental contact or breakage in Maintenance Shop.
Recent events (2)
- — I (S) $1148.00
- — Z (S) $3443.00
1910.305 A02 X
- Issued
- Sep 13, 2012
- Abate by
- Sep 18, 2012
General-duty citation text
1910.305(a)(2)(x) * Flexible cords and cables shall be protected from accidental damage, as might be caused, for example, by sharp corners, projections, and doorways or other pinch points. 1. Flexible cord running through metal wall in Loading Area. 2. Flexible cord running under roll-up door from Maintenance Shop to outside. 3. Flexible cord damaged on cord end in Maintenance shop.
Recent events (2)
- — I (S)
- — Z (S)
1910.305 B01 II
- Issued
- Sep 13, 2012
- Abate by
- Sep 18, 2012
General-duty citation text
1910.305(b)(1)(ii) * Unused openings in cabinets, boxes, and fittings shall be effectively closed. Electrical panel missing blanks. 1. Maintenance shop. 2. Fire Pump building
Recent events (2)
- — I (S)
- — Z (S)
1910.305 B02 I
- Issued
- Sep 13, 2012
- Abate by
- Oct 9, 2012
General-duty citation text
1910.305(b)(2)(i) * All pull boxes, junction boxes, and fittings shall be provided with covers identified for the purpose. If metal covers are used, they shall be grounded. In completed installations, each outlet box shall have a cover, faceplate, or fixture canopy. Covers of outlet boxes having holes through which flexible cord pendants pass shall be provided with bushings designed for the purpose or shall have smooth, well-rounded surfaces on which the cords may bear. Electrical receptacle and conduit junction boxes missing covers. Throughout Process Unit, Truck Loading Area, and Tank Farm
Recent events (2)
- — I (S)
- — Z (S)
1910.305 G01 IVA
- Issued
- Sep 13, 2012
- Abate by
- Sep 18, 2012
General-duty citation text
1910.305(g)(1)(iv)(A) * Unless specifically permitted otherwise in paragraph (g)(1)(ii) of this section, flexible cords and cables may not be used: As a substitute for the fixed wiring of a structure; Temporary wiring used in lieu of fixed wiring. 1. Fire Pump building. 2. Water cooler plugged into extension cord. 3. Knock Engine room.
Recent events (2)
- — I (S)
- — Z (S)
1910.305 G02 III
- Issued
- Sep 13, 2012
- Abate by
- Oct 9, 2012
General-duty citation text
1910.305(g)(2)(iii) * Flexible cords and cables shall be connected to devices and fittings so that strain relief is provided that will prevent pull from being directly transmitted to joints or terminal screws. Inadequate strain relief provided for flexible cords. 1. Conduit to flexible cord on pump motors in Process Unit and Truck Loading Area. 2. Outside receptacle of Maintenance Shop.
Recent events (2)
- — I (S)
- — Z (S)
1910.1200 E01
- Issued
- Sep 13, 2012
- Abate by
- Oct 9, 2012
- Penalty
- Initial $2,754 · Current $1,148 Reduced
General-duty citation text
1910.1200(e)(1) * Employers shall develop, implement, and maintain at each workplace, a written hazard communication program which at least describes how the criteria specified in paragraphs (f), (g), and (h) of this section for labels and other forms of warning, safety data sheets, and employee information and training will be met, and which also includes the following: Employer has not established a written Hazard Communication program.
Recent events (2)
- — I (O) $1148.00
- — Z (S) $2754.00
1910.1200 F05 I
- Issued
- Sep 13, 2012
- Abate by
- Sep 18, 2012
General-duty citation text
1910.1200(f)(5)(i) * Except as provided in paragraphs (f)(6) and (f)(7) of this section, the employer shall ensure that each container of hazardous chemicals in the workplace is labeled, tagged or marked with the following information: Identity of the hazardous chemicals(s) contained therein. Unlabeled chemical containers / bottles: 1. Unlabeled bottles and sprayer in Maintenance Shop - Back. 2. Diesel fuel tank (Outside Refueling area) not labeled with contents. 3. Unlabeled gallon containers (Process Unit). 4. Caustic soda solution totes not labeled.
Recent events (2)
- — I (S)
- — Z (S)
1910.1200 G08
- Issued
- Sep 13, 2012
- Abate by
- Sep 18, 2012
General-duty citation text
1910.1200(g)(8) * The employer shall maintain in the workplace copies of the required material safety data sheets for each hazardous chemical, and shall ensure that they are readily accessible during each work shift to employees when they are in their work area(s). (Electronic access, microfiche, and other alternatives to maintaining paper copies of the material safety data sheets are permitted as long as no barriers to immediate employee access in each workplace are created by such options.) Employer did not have all MSDS for chemicals in the facility. 1. Twelve chemicals checked, missing three MSDS.
Recent events (2)
- — I (S)
- — Z (S)
1910.1200 H01
- Issued
- Sep 13, 2012
- Abate by
- Oct 9, 2012
General-duty citation text
1910.1200(h)(1) * Employers shall provide employees with effective information and training on hazardous chemicals in their work area at the time of their initial assignment, and whenever a new phyical or health hazard the employees have not previously been trained about is introduced into their work area. Information and training may be designed to cover categories of hazards (e.g., flammability, carcinogenicity) or specific chemicals. Chemical- specific information must always be available through labels and material safety data sheets. The employer did not adequately train the employees on Hazard Communication Program. Site specific training not accomplished.
Recent events (2)
- — I (S)
- — Z (S)
1910.1450 E03 VII
- Issued
- Sep 13, 2012
- Abate by
- Oct 9, 2012
- Penalty
- Initial $3,443 · Current $1,148 Reduced
General-duty citation text
1910.1450(e)(3)(vii) * Designation of personnel responsible for implementation of the Chemical Hygiene Plan including the assignment of a Chemical Hygiene Officer, and, if appropriate, establishment of a Chemical Hygiene Committee. A Chemical Hygiene Officer and Committee were not established by employer for the fuels lab activities.
Recent events (2)
- — I (S) $1148.00
- — Z (S) $3443.00
1910.1450 E04
- Issued
- Sep 13, 2012
- Abate by
- Oct 9, 2012
General-duty citation text
1910.1450(e)(4) * The employer shall review and evaluate the effectiveness of the Chemical Hygiene Plan at least annually and update it as necessary. Chemical Hygiene Plan not reviewed or updated annually by employer for the fuels lab activities.
Recent events (2)
- — I (S)
- — Z (S)
1910.1450 F03 V
- Issued
- Sep 13, 2012
- Abate by
- Oct 9, 2012
General-duty citation text
1910.1450(f)(3)(v) * The location and availability of known reference material on the hazards, safe handling, storage and disposal of hazardous chemicals found in the laboratory including, but not limited to, material safety Data Sheets received from the chemical supplier. Ancillary: 1994 NFC 45-16 7-2.3.6, "Laboratory storage facilities shall be inspected to ensure compliance with the provisions of this chapter". Improper storage of Laboratory chemicals (too many for cabinet & incompatible substances being stored together).
Recent events (2)
- — I (S)
- — Z (S)
1910.1450 F04 IC
- Issued
- Sep 13, 2012
- Abate by
- Oct 9, 2012
General-duty citation text
1910.1450(f)(4)(i)(C) * Employee training shall include: The measures employees can take to protect themselves from these hazards, including specific procedures the employer has implemented to protect employees from exposure to hazardous chemicals, such as appropriate work practices, emergency procedures, and personal protective equipment to be used. The employer did not adequately train employees on the Chemical Hygiene Plan for the Lab.
Recent events (2)
- — I (S)
- — Z (S)
1910.22 D01
- Issued
- Sep 13, 2012
- Abate by
- Sep 18, 2012
General-duty citation text
1910.22(d)(1) * In every building or other structure, or part thereof, used for mercantile, business, industrial, or storage purposes, the loads approved by the building official shall be marked on plates of approved design which shall be supplied and securely affixed by the owner of the building, or his duly authorized agent, in a conspicuous place in each space to which they relate. Such plates shall not be removed or defaced but, if lost, removed, or defaced, shall be replaced by the owner or his agent. No load rating identified on overhead storage areas. 1. Maintenance Shop - Back. 2. Maintenance Shop - Middle.
Recent events (2)
- — I (O)
- — Z (O)
1910.39 C01
- Issued
- Sep 13, 2012
- Abate by
- Sep 18, 2012
General-duty citation text
1910.39(c)(1) Minimum elements of a fire prevention plan. A fire prevention plan must include: A list of all major fire hazards, proper handling and storage procedures for hazardous materials, potential ignition sources and their control, and the type of fire protection equipment necessary to control each major hazard; Fire Prevention Program missing required element, A List of Fire Hazards at Facility.
Recent events (2)
- — I (O)
- — Z (O)
1910.39 C02
- Issued
- Sep 13, 2012
- Abate by
- Sep 18, 2012
General-duty citation text
1910.39(c)(2) * Minimum elements of a fire prevention plan. A fire prevention plan must include: Procedures to control accumulations of flammable and combustible waste materials; Fire Prevention Program missing required element, Control Procedures.
Recent events (2)
- — I (O)
- — Z (O)
1910.39 C03
- Issued
- Sep 13, 2012
- Abate by
- Sep 18, 2012
General-duty citation text
1910.39(c)(3) * Minimum elements of a fire prevention plan. A fire prevention plan must include: Procedures for regular maintenance of safeguards installed on heat-producing equipment to prevent the accidental ignition of combustible materials; Fire Prevention Program missing required element, Procedures for regular maintenance of safeguards installed on heat-producing equipment.cing
Recent events (2)
- — I (O)
- — Z (O)
1910.39 D
- Issued
- Sep 13, 2012
- Abate by
- Sep 18, 2012
General-duty citation text
1910.39(d) * Employee information. An employer must inform employees upon initial assignment to a job of the fire hazards to which they are exposed. An employer must also review with each employee those parts of the fire prevention plan necessary for self- protection. Employer failed to inform employees upon initial Job Assignment of Fire Hazards.
Recent events (2)
- — I (O)
- — Z (O)
1910.120 Q02 II
- Issued
- Sep 13, 2012
- Abate by
- Oct 9, 2012
General-duty citation text
1910.120(q)(2)(ii) * Elements of an emergency response plan. The employer shall develop an emergency response plan for emergencies which shall address, as a minimum, the following areas to the extent that they are not addressed in any specific program required in this paragraph: Personnel roles, lines of authority, training, and communication. The Emergency Response Plan was missing required element. Personnel Roles
Recent events (2)
- — I (O)
- — Z (O)
1910.120 Q02 V
- Issued
- Sep 13, 2012
- Abate by
- Oct 9, 2012
General-duty citation text
1910.120(q)(2)(v) * Elements of an emergency response plan. The employer shall develop an emergency response plan for emergencies which shall address, as a minimum, the following areas to the extent that they are not addressed in any specific program required in this paragraph: Site security and control. Emergency Response Plan was missing required element. Site Security
Recent events (2)
- — I (O)
- — Z (O)
1910.120 Q02 XI
- Issued
- Sep 13, 2012
- Abate by
- Oct 9, 2012
General-duty citation text
1910.120(q)(2)(xi) * Elements of an emergency response plan. The employer shall develop an emergency response plan for emergencies which shall address, as a minimum, the following areas to the extent that they are not addressed in any specific program required in this paragraph: PPE and emergency equipment. Emergency Response Plan was missing required element. Personal Protective Equipment.
Recent events (2)
- — I (O)
- — Z (O)
1910.147 C06 I
- Issued
- Sep 13, 2012
- Abate by
- Oct 9, 2012
General-duty citation text
1910.147(c)(6)(i) * Periodic inspection. The employer shall conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed. Lock out / Tag out program not reviewed or updated annually by employer.
Recent events (2)
- — I (O)
- — Z (O)
1910.147 C07 IA
- Issued
- Sep 13, 2012
- Abate by
- Oct 9, 2012
General-duty citation text
1910.147(c)(7)(i)(A) * The employer shall provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees. The training shall include the following: Each authorized employee shall receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation and control. The employer did not adequately train the employees on the Lockout / Tag out Program. Site specific training not accomplished.
Recent events (2)
- — I (O)
- — Z (O)
1910.165 D02
- Issued
- Sep 13, 2012
- Abate by
- Sep 18, 2012
General-duty citation text
1910.165(d)(2) * The employer shall assure that a test of the reliability and adequacy of non- supervised employee alarm systems is made every two months. A different actuation device shall be used in each test of a multi-actuation device system so that no individual device is used for two consecutive tests. Emergency alarm testing not being done at facility.
Recent events (2)
- — I (O)
- — Z (O)
1910.244 A01 II
- Issued
- Sep 13, 2012
- Abate by
- Sep 18, 2012
General-duty citation text
1910.244(a)(1)(ii) * The rated load shall be legibly and permanently marked in a prominent location on the jack by casting, stamping, or other suitable means. Portable jack and jack stands not identified with load rating in Maintenance shop.
Recent events (2)
- — I (O)
- — Z (O)
1910.1030 C01
- Issued
- Sep 13, 2012
- Abate by
- Oct 9, 2012
General-duty citation text
1910.1030(c)(1)(i) * Each employer having an employee(s) with occupational exposure as defined by paragraph (b) of this section shall establish a written Exposure Control Plan designed to eliminate or minimize employee exposure. Blood borne Pathogen Program/Policy was not fully established.
Recent events (2)
- — I (O)
- — Z (O)
1910.1030 C01 IIB
- Issued
- Sep 13, 2012
- Abate by
- Oct 9, 2012
General-duty citation text
1910.1030(c)(1)(ii)(B) * The Exposure Control Plan shall contain at least the following elements: The schedule and method of implementation for paragraphs (d) Methods of Compliance, (e) HIV and HBV Research Laboratories and Production Facilities, (f) Hepatitis B Vaccination and Post-Exposure Evaluation and Follow-up, (g) Communication of Hazards to Employees, and (h) Recordkeeping, of this standard, and The Exposure control plan was missing required element, Post-Exposure Evaluation and Follow-up Procedures.
Recent events (2)
- — I (O)
- — Z (O)
1910.1030 F01 I
- Issued
- Sep 13, 2012
- Abate by
- Oct 9, 2012
General-duty citation text
1910.1030(f)(1)(i) The employer shall make available the hepatitis B vaccine and vaccination series to all employees who have occupational exposure, and post-exposure evaluation and follow-up to all employees who have had an exposure incident. Hepatitis B Vaccination documentation was missing.
Recent events (2)
- — I (O)
- — Z (O)
1910.1030 G02 I
- Issued
- Sep 13, 2012
- Abate by
- Oct 9, 2012
General-duty citation text
1910.1030(g)(2)(i) * Information and Training. The employer shall train each employee with occupational exposure in accordance with the requirements of this section. Such training must be provided at no cost to the employee and during working hours. The employer shall institute a training program and ensure employee participation in the program. The employer did not adequately train the employees on Blood Borne Pathogen Program.
Recent events (2)
- — I (O)
- — Z (O)
More inspections at Silver Eagle Refining INC.
View Silver Eagle Refining INC.'s full OSHA safety record →
More inspections in this industry (NAICS 324110)
Jul 15, 2026
Torrance Refining Company LLC · TORRANCE, CA
Jul 13, 2026
Exxon Mobil OIL Corporation · NOME, TX
Jul 6, 2026
Martinez Refining Company LLC · MARTINEZ, CA
Jun 30, 2026
Chevron U.S.A. INC. · EL SEGUNDO, CA
Jun 30, 2026
Chevron U.S.A. INC. · EL SEGUNDO, CA
More inspections in WY
Jul 15, 2026
Aztec Construction · CHEYENNE, WY
Jul 8, 2026
Pride Roofing and Construction · CHEYENNE, WY
Jul 7, 2026
Pelican Roofing LLC · CHEYENNE, WY
Jul 7, 2026
Capitol Roofing INC · CHEYENNE, WY
Jul 7, 2026
Sapp Bros · CHEYENNE, WY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 314510710.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.