GREEN COVE SPGS, FL —
OSHA Inspection: TRINITY FABRICATORS, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of TRINITY FABRICATORS, INC. in 825 CORPORATE SQUARE ROAD, GREEN COVE SPGS, FL 32043 (NAICS 332312). OSHA activity number 315479956.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- TRINITY FABRICATORS, INC.
- Site address
- 825 CORPORATE SQUARE ROAD
- City
- GREEN COVE SPGS
- State
- FL
- ZIP
- 32043
- Mailing
- 825 CORPORATE SQUARE ROAD, GREEN COVE SPRINGS, FL 32043
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332312
- SIC code (legacy)
- 3441
- Employees
- 25
- Ownership type
- A
Citations
7 citations on file for this inspection.
5(a)(1)
- Issued
- Nov 3, 2011
- Abate by
- Nov 8, 2011
- Penalty
- Initial $1,620 · Current $1,035 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to crushing hazard: a.On or about September 8, 2011, in the loading area, the Taylor forklift did not have a working seat belt, the seat belt was heavily corroded and buckled up under the seat, exposing employees to being crushed by overturned lifts. b.On or about September 8, 2011, in the loading area, the Gradall forklift did not have a working seat belt, the seat belt was heavily corroded and could not be buckled together, exposing employees to being crushed by overturned lifts c.On or about September 8, 2011, in the loading area, the Tico off road yard tractor did not have a working seat belt, the seat belt had been removed, exposing employees to being ejected from the machine and either crushed by or struck by the tractor. Among the most feasible means of abatement include but are not limited to the following: 1.Utilizing the seat belts in accordance with ASME/ANSI B56.1-1998, paragraph 5.3.19 which provides in the part that, "an active operator protection device or system, when provided, shall be used". 2.Creating and enforcing a forklift safety program which ensures protective devices are used. or in the alternative: 29 CFR 1910.178(p)(1): Powered industrial truck(s) with defect(s) or in anyway unsafe had not been withdrawn from service until restored to safe operating condition(s): ABATEMENT CERTIFICATION AND DOCUMENTATION ARE NOT REQUIRED.TION
Recent events (2)
- — I (S) $1035.00
- — Z (S) $1620.00
1910.212 A03 II
- Issued
- Nov 3, 2011
- Abate by
- Nov 8, 2011
- Penalty
- Initial $2,160 · Current $1,035 Reduced
Recent events (2)
- — I (S) $1035.00
- — Z (S) $2160.00
1910.215 B09
- Issued
- Nov 3, 2011
- Abate by
- Nov 8, 2011
- Penalty
- Initial $2,160 · Current $1,035 Reduced
Recent events (2)
- — I (S) $1035.00
- — Z (S) $2160.00
1910.305 B02
- Issued
- Nov 3, 2011
- Abate by
- Nov 8, 2011
- Penalty
- Initial $2,160 · Current $1,035 Reduced
Recent events (2)
- — I (S) $1035.00
- — Z (S) $2160.00
1910.333 A01
- Issued
- Nov 3, 2011
- Abate by
- Nov 8, 2011
- Penalty
- Initial $2,160 · Current $1,035 Reduced
Recent events (2)
- — I (S) $1035.00
- — Z (S) $2160.00
1910.23 C01
- Issued
- Nov 3, 2011
- Abate by
- Nov 29, 2011
- Penalty
- Initial $2,160
Recent events (2)
- — I (S)
- — Z (S) $2160.00
1910.254 D09 III
- Issued
- Nov 3, 2011
- Abate by
- Nov 29, 2011
- Penalty
- Initial $2,160 · Current $1,035 Reduced
Recent events (2)
- — I (S) $1035.00
- — Z (S) $2160.00
More inspections at Trinity Fabricators, INC.
View Trinity Fabricators, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332312)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 315479956.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.