CHICAGO, IL —
OSHA Inspection: JC & SON MASONRY, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of JC & SON MASONRY, INC. in 1243 EDDY, CHICAGO, IL 60613 (NAICS 238140). OSHA activity number 330973850.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- JC & SON MASONRY, INC.
- Site address
- 1243 EDDY
- City
- CHICAGO
- State
- IL
- ZIP
- 60613
- Mailing
- 3447 N. NATCHEZ AVE., CHICAGO, IL 60634
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 6
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.451 D16
- Issued
- Sep 15, 2011
- Abate by
- Nov 15, 2011
- Penalty
- Initial $3,300 · Current $1,320 Reduced
General-duty citation text
29 CFR 1926.451(d)(16): The suspension scaffold power-operated hoist or manually operated hoist did not have, in addition to the normal operating brake, a braking device or locking pawl which engages automatically when a hoist makes either of the following uncontrolled movements: an instantaneous change in momentum or an accelerated overspeed. a) Employees were working from a two-point adjustable suspension scaffold which did not have a breaking device or locking pawl. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (S) $1320
- — Z (S) $3300
1926.451 D17
- Issued
- Sep 15, 2011
- Abate by
- Nov 15, 2011
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.451(d)(17): Manually operated hoists did not have a positive crank force to descend: a) Employees were working from a two-point adjustable suspension scaffold where the manually operated hoist did not have a positive crank force to descend. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.451 E01
- Issued
- Sep 15, 2011
- Abate by
- Sep 16, 2011
- Penalty
- Initial $3,300 · Current $1,320 Reduced
General-duty citation text
29 CFR 1926.451(e)(1): When scaffold platforms were more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from other scaffold, structure, personnel hoist, or similar surface was not used. Crossbraces were used as a means of access. a) Employees were not provided with safe access to a two-point adjustable suspension scaffold platform being used at an elevation of approximately 22 feet above the ground. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (S) $1320
- — Z (S) $3300
1926.451 G01 II
- Issued
- Sep 15, 2011
- Abate by
- Sep 16, 2011
- Penalty
- Initial $4,620 · Current $1,860 Reduced
General-duty citation text
29 CFR 1926.451(g)(1)(ii): Each employee on a single-point or two-point adjustable suspension scaffold was not protected by both a personal fall arrest system and a guardrail system: a) Employees were not protected from fall hazards of approximately 22 feet to the ground while working from two-point adjustable suspension scaffold. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (S) $1860
- — Z (S) $4620
More inspections at JC & SON Masonry, INC.
View JC & SON Masonry, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238140)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 330973850.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.