DRESSER, WI —
OSHA Inspection: TENERE INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of TENERE INC. in 700 KELLY AVE., DRESSER, WI 54009 (NAICS 332322). OSHA activity number 331096446.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- TENERE INC.
- Site address
- 700 KELLY AVE.
- City
- DRESSER
- State
- WI
- ZIP
- 54009
- Mailing
- 700 KELLY AVE., DRESSER, WI 54009
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332322
- Employees
- 240
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.95 G06
- Issued
- Jan 25, 2012
- Abate by
- Mar 8, 2012
- Penalty
- Initial $3,740 · Current $2,618 Reduced
General-duty citation text
29 CFR 1910.95(g)(6): At least annually after obtaining the baseline audiogram, the employer did not obtain a new audiogram for each employee exposed at or above an 8-hour time-weighted average of 85 decibels : a) Throughout the facility; The employer did not conduct annual audiograms of employees that were exposed to 8-hour time-weighted noise levels that averaged or exceeded 85 decibels.
Recent events (2)
- — I (S) $2618
- — Z (S) $3740
1910.212 A01
- Issued
- Jan 25, 2012
- Abate by
- Feb 15, 2012
- Penalty
- Initial $2,805 · Current $1,964 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) In the shop are; The Hardinge, Nardini and Takisawa lathes did not have adequate rotating parts and flying chips guarding.
Recent events (2)
- — I (S) $1963.5
- — Z (S) $2805
1910.253 B02 II
- Issued
- Jan 25, 2012
- Abate by
- Feb 15, 2012
- Penalty
- Initial $2,805 · Current $1,964 Reduced
General-duty citation text
29 CFR 1910.253(b)(2)(ii): Inside of buildings, cylinders were not stored in a well-protected, well-ventilated, dry location, at least 20 feet (6.1 m) from highly combustible materials such as oil or excelsior: a) In the plant area; The flammable compressed gas cylinders were not stored at least 20 feet from the oxygen compressed gas cylinders.
Recent events (2)
- — I (S) $1963.5
- — Z (S) $2805
1910.305 G02 III
- Issued
- Jan 25, 2012
- Abate by
- Feb 15, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords and cables were not connected to devices and fittings so that strain relief was provided that would prevent pull from being directly transmitted to joints or terminal screws: a) On the swing arm light in the press area; The outer sheathing of the flexible cord was damaged and did not provide adequate strain relief.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Tenere INC.
View Tenere INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332322)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 331096446.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.