Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,197,124Inspections Most recent open 2026-08-25 Last loaded 2026-08-28

OSHA Inspection: PACIFIC PRESS PUBLISHING ASSOCIATION, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of PACIFIC PRESS PUBLISHING ASSOCIATION, INC. in 1350 KINGS RD., NAMPA, ID 83687 (NAICS 511130). OSHA activity number 331905026.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Pacific Press Publishing Association, INC. for free Get an email when a new federal OSHA severe-injury report for Pacific Press Publishing Association, INC. is published. One employer, no account, unsubscribe in one click.
Site address
1350 KINGS RD.
City
NAMPA
State
ID
ZIP
83687
Mailing
P.O. BOX 5353, NAMPA, ID 83653
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
511130
Employees
120
Ownership type
Private (A)

4 citations on file for this inspection.

1910.178 Q01

Serious Gravity 1 2 instances 5 exposed
Issued
Apr 16, 2012
Abate by
May 29, 2012
Penalty
Initial $2,065 · Current $1,032 Reduced
29 CFR 1910.178(q)(1): Any power-operated industrial truck not in safe operating condition was not removed from service:    a)	Receiving area: on 1/23/2012 and at times prior thereto, a Hyster forklift, locally identified as # 272 had a significant oil leak reported on pre-operation checklists but remained in service.     b)	Receiving area: on 1/23/2012 and at times prior thereto, a Caterpillar forklift, locally identified as # 277 had a significant oil leak reported on pre-operation checklists but remained in service.      Note: Abatement certification IS required for this item.
Recent events (2)
  • · I (S) $1032
  • · Z (S) $2065

1910.178 Q06

Serious Gravity 1 1 instance 5 exposed
Issued
Apr 16, 2012
Abate by
May 29, 2012
Penalty
Initial $0 · Current $0
29 CFR 1910.178(q)(6): Industrial trucks were altered either by the addition of extra parts not provided by the manufacturer or by the elimination of any parts, except as provided in paragraph (q)(12) of this section.    a)	Receiving area: on 1/23/2012 and at times prior thereto, a shop-made drip catch pan was suspended by wire underneath the forklift locally identified as # 272 (Hyster) to catch motor oil that was known to leak from the unit.    Note: Abatement certification IS required for this item.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1910.178 Q07

Serious Gravity 1 2 instances 5 exposed
Issued
Apr 16, 2012
Abate by
May 29, 2012
Penalty
Initial $0 · Current $0
29 CFR 1910.178(q)(7): Industrial trucks were not examined before being placed in service, and were placed in service when the examination showed a condition adversely affecting the safety of the vehicle.    a)	Receiving area: on 1/23/2012 and at times prior thereto,  Hyster forklift # 272 was in service with a drip pan wired underneath that reduced the ground clearance of the vehicle.    b)	Receiving area: on 1/23/2012 and at times prior thereto, Caterpillar forklift # 277 had a significant motor oil leak that could lead to slip and fall injuries, increased fire hazards, and unsafe operation caused by oil on floors and tires was placed in service by maintenance.      Note: Abatement certification IS required for this item.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1910.212 B

Other-than-serious 1 instance 5 exposed
Issued
Apr 16, 2012
Abate by
May 29, 2012
Penalty
Initial $0 · Current $0
29 CFR 1910.212(b): Machines designed for a fixed location were not securely anchored to prevent walking or moving:    (a)  Maintenance Shop: On 1/23/12 and at times prior thereto, the shop drill press was not anchored to the floor.    Note: Abatement certification IS required for this item.
Recent events (2)
  • · I (O) $0
  • · Z (O) $0

View Pacific Press Publishing Association, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 331905026.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.