NEW YORK, NY —
OSHA Inspection: JERRICK ASSOCIATES, INC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of JERRICK ASSOCIATES, INC in 170 CROSBY STREET, NEW YORK, NY 10012 (NAICS 238140). OSHA activity number 332424944.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- JERRICK ASSOCIATES, INC
- Site address
- 170 CROSBY STREET
- City
- NEW YORK
- State
- NY
- ZIP
- 10012
- Mailing
- 88 HAUSMAN STREET, BROOKLYN, NY 11222
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 4
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.102 A01
- Issued
- May 14, 2012
- Abate by
- May 21, 2012
- Penalty
- Initial $2,800 · Current $1,400 Reduced
General-duty citation text
29 CFR 1926.102(a)(1): Employees shall be provided with eye and face protection equipment when machines or operationspresent potential eye or face injury from physical, chemical, or radiation agents. Site: 170 Crosby Street New York, NY On or about 2/22/12 a) Employee was operating a Bosch grinder without eye/face protective wear.
Recent events (2)
- — I (S) $1400
- — Z (S) $2800
1926.300 B01
- Issued
- May 14, 2012
- Abate by
- May 21, 2012
- Penalty
- Initial $4,200 · Current $2,100 Reduced
General-duty citation text
29 CFR 1926.300(b)(1): When power operated tools are designed to accommodate guards, they shall be equipped with suchguards when in use. Site: 170 Crosby Street New York, NY On or about 2/22/12 a) The Bosch grinder provided by the employer was missing the blade guard.
Recent events (2)
- — I (S) $2100
- — Z (S) $4200
1926.404 B01 I
- Issued
- May 14, 2012
- Abate by
- May 21, 2012
- Penalty
- Initial $2,800 · Current $1,400 Reduced
General-duty citation text
29 CFR 1926.404(b)(1)(i): The employer shall use either ground fault circuit interrupters as specified inparagraph (b)(1)(ii) of this section or an assured equipment grounding conductor program as specified in paragraph (b)(1)(iii) of this section toprotect employees on construction sites. These requirements are in addition to any other requirements for equipment grounding conductors. Site: 170 Crosby Street New York, NY On or about 2/22/12 a) The employer did not provide GFCI or an assure equipment grounding conductor program for employees using power tools.
Recent events (2)
- — I (O) $1400
- — Z (S) $2800
1926.404 F06
- Issued
- May 14, 2012
- Abate by
- May 21, 2012
- Penalty
- Initial $2,800 · Current $1,400 Reduced
General-duty citation text
29 CFR 1926.404(f)(6): The path to ground from circuits, equipment, and enclosures shall be permanent andcontinuous. Site: 170 Crosby Street New York, NY On or about 2/22/12 a) The blue extension cord used to energized power tools was missing the ground pin.
Recent events (2)
- — I (O) $1400
- — Z (S) $2800
1926.405 G02 III
- Issued
- May 14, 2012
- Abate by
- May 21, 2012
- Penalty
- Initial $2,800 · Current $1,400 Reduced
General-duty citation text
29 CFR 1926.405(g)(2)(iii): Splices. Flexible cords shall be used only in continuous lengths without splice or tap. Hardservice flexible cords No. 12 or larger may be repaired if spliced so that the splice retains the insulation, outer sheath properties, and usagecharacteristics of the cord being spliced. Site: 170 Crosby Street New York, NY On or about 2/22/12 a) The blue extension cord been use was not properly spliced or insulated.
Recent events (2)
- — I (S) $1400
- — Z (S) $2800
More inspections at Jerrick Associates, INC
View Jerrick Associates, INC's full OSHA safety record →
More inspections in this industry (NAICS 238140)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 332424944.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.