Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: SPRINGBUCK CONSTRUCTION, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of SPRINGBUCK CONSTRUCTION, INC. in STERLING RIDGE LOT #3, ORLAND PARK, IL 60467 (NAICS 238130). OSHA activity number 332800986.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Springbuck Construction, INC. — free Get an email when a new federal OSHA severe-injury report for Springbuck Construction, INC. is published. One employer, no account, unsubscribe in one click.
Site address
STERLING RIDGE LOT #3
City
ORLAND PARK
State
IL
ZIP
60467
Mailing
12457 PROVINCE DRIVE, LEMONT, IL 60439
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
A
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
5
Ownership type
A

5 citations on file for this inspection.

1910.178 L06

Serious Gravity 1 1 instance 1 exposed
Issued
May 22, 2012
Abate by
Jun 13, 2012
Penalty
Initial $1,800 · Current $900 Reduced
29 CFR 1910.178(l)(6):  The employer shall certify that each operator has been trained and evaluated as required by this paragraph (l). The certification shall include the name of the operator, the date of the training, the date of the evaluation, and the identity of the person(s) performing the training or evaluation:    a. On or about March 8, 2012, at the above addressed jobsite, the employee operating the New Holland LM850 rough terrain fork truck had not been certified in the operation of the fork truck.
Recent events (2)
  • — I (S) $900
  • — Z (S) $1800

1926.20 B01

Serious Gravity 1 1 instance 5 exposed
Issued
May 22, 2012
Abate by
Jun 13, 2012
Penalty
Initial $0 · Current $0
29 CFR 1926.20(b)(1): It shall be the responsibility of the employer to initiate and maintain such programs as may be necessary to comply with this part:    a. On or about March 8, 2012, at the above addressed jobsite, a safety and health program, which would address those hazards associated with the employees' work environment had not been developed and maintained.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.20 B02

Serious Gravity 1 5 exposed
Issued
May 22, 2012
Abate by
Jun 13, 2012
Penalty
Initial $0 · Current $0
29 CFR 1926.20(b)(2): Such programs shall provide for frequent and regular inspections of the job sites, materials, and equipment to be made by competent persons designated by the employers:    a. On or about March 8, 2012, at the above addressed jobsite, safety inspections were not made by persons capable of identifying and correcting those hazards which could result in employee injuries.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.503 A01

Serious Gravity 1 1 instance 5 exposed
Issued
May 22, 2012
Abate by
Jun 13, 2012
Penalty
Initial $0 · Current $0
29 CFR 1926.503(a)(1): The employer shall provide a training program for each employee who might be exposed to fall hazards. The program shall enable each employee to recognize the hazards of falling and shall train each employee in the procedures to be followed in order to minimize these hazards:    a. On or about March 8, 2012, at the above addressed jobsite, an employee training program addressing fall hazards and the company's procedures to be followed to protect the employees from exposure to those hazards, had not been developed and maintained.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.501 B13

Serious Gravity 10 2 instances 2 exposed
Issued
May 22, 2012
Abate by
May 23, 2012
Penalty
Initial $4,200 · Current $2,100 Reduced
29 CFR 1926.501(b)(13):  Each employee engaged in residential construction activities 6 feet (1.8 m) or more above lower levels shall be protected by guardrail systems, safety net system, or personal fall arrest system unless another provision in paragraph (b) of this section provides for an alternative fall protection measure.     a. On or about March 8, 2012, at the above addressed jobsite, employees installing the roof trusses over the porch area were exposed to falls of approximately 12 feet due to the lack of fall protection.
Recent events (2)
  • — I (S) $2100
  • — Z (S) $4200

View Springbuck Construction, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 332800986.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.