Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MARTIN CABINET, INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of MARTIN CABINET, INC. in 500 BROAD STREET, BRISTOL, CT 06010 (NAICS 337110). OSHA activity number 333939429.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Martin Cabinet, INC. — free Get an email when a new federal OSHA severe-injury report for Martin Cabinet, INC. is published. One employer, no account, unsubscribe in one click.
Site address
500 BROAD STREET
City
BRISTOL
State
CT
ZIP
06010
Mailing
336 SOUTH WASHINGTON STREET, PLAINVILLE, CT 06062
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
337110
Employees
32
Ownership type
A

9 citations on file for this inspection.

1910.22 A01

Serious Gravity 5 1 instance 28 exposed
Issued
May 14, 2012
Abate by
Jun 26, 2012
Penalty
Initial $2,975 · Current $1,785 Reduced
29 CFR 1910.22(a)(1):   All places of employment, passageways, storerooms or service rooms were not kept clean and orderly or in a sanitary condition:    Shop:  Significant accumulations of sawdust from cutting and finishing operations were left in the work area.
Recent events (2)
  • — I (S) $1785
  • — Z (S) $2975

1910.107 C05

Deleted Serious Gravity 5 2 instances 1 exposed
Issued
May 14, 2012
Penalty
Initial $2,975 · Current $0 Reduced
29 CFR 1910.107(c)(5):   Electrical equipment not approved for locations containing both deposits of readily ignitable residues and explosive vapors was present in spraying area(s):      Formica/Laminate Area: The following equipment, which was plugged in and available for use in the area, was not rated for use in areas where flammables, such as Wilsonart 800 Series Adhesive, may be present:    A.  Porter-Cable, Model 360VS 3" x 24" Variable Speed Belt Sander.  B.  Makita, Model LS1030N Miter Saw.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2975

1910.110 E04 III

Serious Gravity 1 1 instance 1 exposed
Issued
May 14, 2012
Penalty
Initial $1,517 · Current $910 Reduced
29 CFR 1910.110(e)(4)(iii):  Permanent and removable fuel containers were not securely mounted to prevent jarring loose, slipping, or rotating:    The propane tank on the Nissan 5000 powered industrial truck was not securely attached to the machine with the provided straps.
Recent events (2)
  • — I (S) $910.35
  • — Z (S) $1517.25

1910.178 L04 III

Serious Gravity 1 1 instance 4 exposed
Issued
May 14, 2012
Abate by
Jun 26, 2012
Penalty
Initial $1,785 · Current $1,071 Reduced
29 CFR 1910.178(l)(4)(iii):   An evaluation of each powered industrial truck operators performance was not conducted at least once every 3 years:    Facility:  All employees authorized to operate powered industrial vehicles had not had their performance re-evaluated within three years.
Recent events (2)
  • — I (S) $1071
  • — Z (S) $1785

1910.303 G01 II

Other-than-serious 1 instance 28 exposed
Issued
May 14, 2012
Abate by
Jun 26, 2012
Penalty
Initial $2,380 · Current $200 Reduced
29 CFR 1910.303(g)(1)(ii): The required working space about electric equipment rated 600 volts, nominal, or less to ground, was used for storage:    Cutoff Area:  Access to electrical panels was blocked by the storage of wooden boards as well as a barrel of wood scrap.
Recent events (2)
  • — I (O) $200
  • — Z (S) $2380

1910.304 G05

Serious Gravity 5 1 instance 1 exposed
Issued
May 14, 2012
Penalty
Initial $2,023 · Current $1,134 Reduced
29 CFR 1910.304(g)(5): The path to ground from circuits, equipment, and enclosures was not permanent, continuous, and effective:    Formica/Laminating Area:  A Porter-Cable variable speed belt sander was not provided with a path to ground in that it was missing a grounding pin.  Employees were exposed to electric shock hazards.
Recent events (2)
  • — I (S) $1133.8
  • — Z (S) $2023

1910.305 G01 IV A

Serious Gravity 1 1 instance 1 exposed
Issued
May 14, 2012
Penalty
Initial $1,517 · Current $910 Reduced
29 CFR 1910.305(g)(1)(iv)(A):  Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure:    Formica/Laminating Area:  A Makita miter saw was powered by an extension cord which had been attached to the outer wall of the building.
Recent events (2)
  • — I (S) $910.35
  • — Z (S) $1517.25

1910.334 A02 II

Serious Gravity 1 1 instance 1 exposed
Issued
May 14, 2012
Abate by
Jun 26, 2012
Penalty
Initial $1,517 · Current $910 Reduced
29 CFR 1910.334(a)(2)(ii):  When there was a defect or evidence of damage that could expose an employee to injury, the defective or damaged item was not removed from service until the repairs and tests necessary to render the electric equipment safe had been made:      Formica/Laminate Area:  A yellow extension cord used to power a Porter Cable Model 360VS 3" x 24" belt sander had damaged insulation which was covered by black electrical tape.
Recent events (2)
  • — I (S) $910.35
  • — Z (S) $1517.25

1910.147 C06 I

Other-than-serious 1 instance 3 exposed
Issued
May 14, 2012
Abate by
Jun 26, 2012
Penalty
Initial $0 · Current $0
29 CFR 1910.147(c)(6)(i): The employer did not conduct an annual or more frequent inspection of the energy control procedure to ensure that the procedure and requirements of this standard were followed:    Shop:  The employer had not conducted an annual review of the Lockout/Tagout procedures to ensure procedures were followed.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Martin Cabinet, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 333939429.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.