HALLS, TN —
OSHA Inspection: PATTON-TULLY MARINE, LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of PATTON-TULLY MARINE, LLC in 215 HALES POINT GRAINERY RD, HALLS, TN 38040 (NAICS 237990). OSHA activity number 334624616.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PATTON-TULLY MARINE, LLC
- Site address
- 215 HALES POINT GRAINERY RD
- City
- HALLS
- State
- TN
- ZIP
- 38040
- Mailing
- PO BOX 28, MEMPHIS, TN 38101
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 237990
- Employees
- 7
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.1501 A09
- Issued
- Jun 14, 2012
- Abate by
- Jul 6, 2012
- Penalty
- Initial $2,380 · Current $1,428 Reduced
General-duty citation text
29 CFR 1926.1501(a)(9): Accessible areas within the swing radius of the rear of the rotating superstructure of the crane, either permanently or temporarily mounted, were not barricaded in such a manner as to prevent an employee from being struck or crushed by the crane. a) Cargill Facility, Halls, TN - On or about 6/6/12, employees were exposed to struck-by hazards when the swing radius of the Terex and Sumitomo cranes were not barricaded. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (S) $1428
- — Z (S) $2380
1926.1501 F01 IV
- Issued
- Jun 14, 2012
- Abate by
- Jul 6, 2012
- Penalty
- Initial $2,975 · Current $1,785 Reduced
General-duty citation text
29 CFR 1926.1501(f)(1)(iv): Mobile cranes on barges were not positively secured. a) Cargill facility , Halls, TN - On or about 6/6/12, the Terex and Sumitomo cranes were not secured to the barge. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (S) $1785
- — Z (S) $2975
1926.350 A10
- Issued
- Jun 14, 2012
- Abate by
- Jul 6, 2012
- Penalty
- Initial $2,380 · Current $1,428 Reduced
General-duty citation text
29 CFR 1926.350(a)(10): Oxygen cylinders in storage were not separated from fuel-gas cylinders or combustible materials (especially oil or grease), a minimum distance of 20 feet (6.1 m) or by a noncombustible barrier at least 5 feet (1.5 m) high having a fire-resistance rating of at least one-half hour: a) Cargill Site, Halls, TN - On or about 6/6/12, employees were exposed to fire and explosion hazards when oxygen and acetylene cylinders were not separated by a fire-wall with a 1/2 hour rating. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (S) $1428
- — Z (S) $2380
1910.1200 E01
- Issued
- Jun 14, 2012
- Abate by
- Jul 6, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: (Construction Reference: 1926.59) a) Cargill Facility, Halls, TN - On or about 6/6/12, a written hazard communication plan was not maintained at the site. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (O) $0
- — Z (O) $0
1926.350 H
- Issued
- Jun 14, 2012
- Abate by
- Jul 6, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.350(h): Oxygen, and fuel gas pressure regulators, or their related gauges were not in proper working order while in use: a) Cargill Facility, Halls, TN - On or about 6/6/12, the regulators on the oxygen and acetylene cylinders were not in proper working order in that the plastic/glass covers was missing. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Patton-Tully Marine, LLC
View Patton-Tully Marine, LLC's full OSHA safety record →
More inspections in this industry (NAICS 237990)
More inspections in TN
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 334624616.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.