SAN ANTONIO, TX —
OSHA Inspection: STAR SHUTTLE & CHARTER
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of STAR SHUTTLE & CHARTER in 8715 AIRPORT BLVD, SAN ANTONIO, TX 78216 (NAICS 485510). OSHA activity number 334714409.
Where did this inspection happen?
- Establishment
- STAR SHUTTLE & CHARTER
- Site address
- 8715 AIRPORT BLVD
- City
- SAN ANTONIO
- State
- TX
- ZIP
- 78216
- Mailing
- 8715 AIRPORT BLVD, SAN ANTONIO, TX 78216
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 485510
- Employees
- 12
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.107 C02
- Issued
- Abate by
- Penalty
- Initial $2000.00 · Current $2000.00
General-duty citation text
29 CFR 1910.107(c)(2): Spark-producing equipment is used inside the spraying area, and is not separated by a partition: On or about June 11, 2012, and at times prior thereto, inside the paint spray booth, employees were exposed to injury from explosion, while conducting painting operations with combustible paint from a SL-20 aerial lift.
Recent events (2)
- — I (S) $2000
- — Z (S) $2000
1910.178 P01
- Issued
- Abate by
- Penalty
- Initial $2000.00 · Current $1500.00 Reduced
General-duty citation text
29 CFR 1910.178(p)(1): If at any time a powered industrial truck is found to be in need of repair, defective, or in any way unsafe, the truck was not taken out of service until it had been restored to safe operating condition: At the site, on or about June 11, 2012 and at times prior thereto, employees utilized a propane-powered industrial truck (Brand TCM, Model FC815P9) inside the facility that was in disrepair with a broken left arm of the carriage bar, exposing employees to a struck-by hazard.
Recent events (2)
- — I (S) $1500
- — Z (S) $2000
1910.178 Q07
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.178(q)(7): Industrial trucks are not examined before being placed in service, and are placed in service if the examination shows any condition adversely affecting the safety of the vehicle. Such examinations are not made at least daily. Defects when found are not immediately reported and corrected: At the site, on or about June 11, 2012 and at times prior thereto, employees utilized a propane-powered industrial truck (Brand TCM, Model FC815P9) inside the facility that was in disrepair with a broken left arm of the carriage bar, exposing employees to a struck-by hazard, as the forklift is not inspected daily.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 B
- Issued
- Abate by
- Penalty
- Initial $2000.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1910.212(b): Machines designed for a fixed location were not securely anchored to prevent walking or moving: At the site, on June 11, 2012, near the west wall, the Central Machinery 6-inch bench grinder used for sharpening the mechanics' tools was not mounted securely on the table on which it was used.
Recent events (2)
- — I (S) $0
- — Z (S) $2000
1910.215 B09
- Issued
- Abate by
- Penalty
- Initial $2000.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top exceeded one-fourth inch: At the site, on June 11, 2012, and at times prior thereto, near the west wall of the building, the Central Machinery 6-inch Bench grinder that employee(s) used for sharpening tools had greater than one-fourth inch distance between the tongue and the grinding wheel.
Recent events (2)
- — I (S) $0
- — Z (S) $2000
1910.305 G02 III
- Issued
- Abate by
- Penalty
- Initial $2000.00 · Current $2000.00
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords and cables were not connected to devices and fittings so that strain relief is provided that will prevent pull from being directly transmitted to joints or terminal screws: At the site, on or about June 11, 2012, and at times prior thereto, on the aerial platform lift used in the paint spray booth, the electrical wiring on the lift control box was exposed for approximately 4 inches, exposing employees to electrical shock when energized.
Recent events (2)
- — I (S) $2000
- — Z (S) $2000
More inspections at STAR SHUTTLE & CHARTER
SAN ANTONIO, TX—2016-02-17 00:00:00
STAR SHUTTLE & CHARTER
SAN ANTONIO, TX—2012-08-02 00:00:00
STAR SHUTTLE & CHARTER
View STAR SHUTTLE & CHARTER's full OSHA safety record →
More inspections in this industry (NAICS 485510)
STONE MOUNTAIN, GA—2026-06-20
JD PRIVATE COACH LLC
RICHLAND, WA—2026-05-27
WA317991398 - BENTON FRNKLN PBLC TRNSP BNFT AREA ATHTY
RICHLAND, WA—2026-03-16
WA317989926 - BENTON FRNKLN PBLC TRNSP BNFT AREA ATHTY
STATE COLLEGE, PA—2026-03-05
FULLINGTON TRAILWAYS LLC
SAN FRANCISCO, CA—2026-01-27
BAUER'S INTELLIGENT TRANSPORTATION
More inspections in TX
WICHITA FALLS, TX—2026-07-16
UNITED RENTALS, INC.
SAN MARCOS, TX—2026-07-16
CASA MECHANICAL SERVICES, LTD.
CLARKSVILLE, TX—2026-07-15
SEQUOIAS TREE EXPERT LLC
EL PASO, TX—2026-07-15
SURE STEEL
CORPUS CHRISTI, TX—2026-07-15
NORTH STAR ENERGY SOLUTIONS LLC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 334714409.