LOUISVILLE, MS —
OSHA Inspection: TAYLOR MACHINE WORKS, INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of TAYLOR MACHINE WORKS, INC. in 650 N. CHURCH AVE, LOUISVILLE, MS 39339 (NAICS 333924). OSHA activity number 334792389.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- TAYLOR MACHINE WORKS, INC.
- Site address
- 650 N. CHURCH AVE
- City
- LOUISVILLE
- State
- MS
- ZIP
- 39339
- Mailing
- 650 N. CHURCH AVE, LOUISVILLE, MS 39339
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333924
- Employees
- 413
- Ownership type
- A
Citations
10 citations on file for this inspection.
1910.23 C01
- Issued
- Sep 11, 2012
- Abate by
- Oct 2, 2012
- Penalty
- Initial $2,700 · Current $1,620 Reduced
General-duty citation text
29 CFR 1910.23(c)(1): Open-sided floors and/or platforms four feet or more above adjacent floor or ground level were not guarded with standard railings (or equivalent): (a) Assembly - On or about June 26, 2012 the employee was working 8 feet above ground level off of a platform assemblying material handling equipment. Employee was not protected from falling to a lower level by a guardrail system or personal fall arrest system.
Recent events (2)
- — I (S) $1620
- — Z (S) $2700
1910.179 J02 III
- Issued
- Sep 11, 2012
- Abate by
- Oct 2, 2012
- Penalty
- Initial $2,025 · Current $1,215 Reduced
General-duty citation text
29 CFR 1910.179(j)(2)(iii): Monthly inspections of hooks, with a certification record which includes the date of inspection, the signature of the person who performed the inspection and the serial number, or other identifier, of the hook inspected, were not performed: (a) Building 6 - On June 14, 2012 monthly inspections with written certification were not conducted on Kranco 10 ton crane.
Recent events (2)
- — I (S) $1215
- — Z (S) $2025
1910.179 J02 IV
- Issued
- Sep 11, 2012
- Abate by
- Oct 2, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.179(j)(2)(iv): Monthly inspections of hoist chains, with a certification record which includes the date of inspection, the signature of the person who performed the inspection and an identifier of the chain which was inspected, were not performed: (a) Building 6 - On or about June 14, 2012 monthly inspections and certification records were not maintained for hoist chains on Kranco 10 ton crane.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.179 J03
- Issued
- Sep 11, 2012
- Abate by
- Oct 24, 2012
- Penalty
- Initial $2,025 · Current $1,215 Reduced
General-duty citation text
29 CFR 1910.179(j)(3): A complete periodic inspection of crane(s) had not been conducted in the past 12 months: (a) Building 6 - On June 14, 2012 the Kranco 10 ton crane had not received a complete inspection in over 3 years.
Recent events (2)
- — I (S) $1215
- — Z (S) $2025
1910.212 A03 II
- Issued
- Sep 11, 2012
- Abate by
- Oct 2, 2012
- Penalty
- Initial $3,375 · Current $2,025 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point of operation guards were not designed and constructed as to prevent the operator from having any part of their body in the danger zone during the operating cycle: (a) Burning Shop - On or about June 26, 2012 employee operating a Pacific press brake was holding a part with his fingers within 3 inches of the unguarded point ot operation.
Recent events (2)
- — I (S) $2025
- — Z (S) $3375
1910.303 B02
- Issued
- Sep 11, 2012
- Abate by
- Oct 24, 2012
- Penalty
- Initial $2,025 · Current $1,215 Reduced
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: (a) Paint Shop - On or about June 26, 2012 a receptacle wall outlet box was wired to be used as an extension cord. (b) Machine Shop - On or about June 26, 2012 a General Electric household oven was used to heat parts.
Recent events (2)
- — I (S) $1215
- — Z (S) $2025
1910.303 F02
- Issued
- Sep 11, 2012
- Abate by
- Oct 2, 2012
- Penalty
- Initial $2,025 · Current $1,215 Reduced
General-duty citation text
29 CFR 1910.303(f)(2): Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident: (a) Small Welding - On or about June 14, 2012 electrical panel box was not labeled to indicate the purpose of each circuit breaker.
Recent events (2)
- — I (S) $1215
- — Z (S) $2025
1910.22 B01
- Issued
- Sep 11, 2012
- Abate by
- Oct 24, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.22(b)(1): Aisles and passageways were not kept clear and in good repair, with no obstruction across or in aisles that could create a hazard. (a) Small Welding - On June 14, 2012 the concrete floors had holes in the work area creating a tripping hazard for employees.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.22 D01
- Issued
- Sep 11, 2012
- Abate by
- Oct 2, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.22(d)(1): In every building or other structure, or part thereof, used for mercantile, business, industrial, or storage purposes, the loads approved by the building official were not marked in a conspicuous place in each space to which they related: (a) Maintenance Shop - On or about June 14, 2012 the area above the office of the shop manager had brooms and other items stored there. The floor load limit rating had not been determined for the storage area.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.107 B05 II
- Issued
- Sep 11, 2012
- Abate by
- Oct 2, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.107(b)(5)(ii): Discarded filter pads and filter rolls were not immediately removed to a safe, well-detached location or placed in a water-filled metal container and disposed of at the close of the day's operation when not maintained completel (a) Outside Paint Shop - On or about June 26, 2012 drums filled with discaraded filter pads coated with various paints contained xylene and methyl ethyl ketones.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Taylor Machine Works, INC.
View Taylor Machine Works, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 333924)
More inspections in MS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 334792389.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.