TAMPA, FL —
OSHA Inspection: MITEK USA, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of MITEK USA, INC. in 1801 MASSARO BLVD., TAMPA, FL 33619 (NAICS 332116). OSHA activity number 334925781.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MITEK USA, INC.
- Site address
- 1801 MASSARO BLVD.
- City
- TAMPA
- State
- FL
- ZIP
- 33619
- Mailing
- 1801 MASSARO BLVD., TAMPA, FL 33619
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332116
- Employees
- 35
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.219 E01 I
- Issued
- Aug 29, 2012
- Penalty
- Initial $3,400 · Current $2,040 Reduced
General-duty citation text
29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs seven -7 feet or less from the floor level were not guarded with a guard that extended to at least fifteen inches above the belt: a) For the Mitek facility at 1801 Massaro Blvd., Tampa, FL 33619, as observed on or about 06/27/2012, employees were exposed to a waist high unguarded conveyor belt nip point at punch press T-14.
Recent events (2)
- — I (S) $2040
- — Z (S) $3400
1910.215 B09
- Issued
- Aug 29, 2012
- Penalty
- Initial $3,400 · Current $2,040 Reduced
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: a) For the Mitek facility at 1801 Massaro Blvd., Tampa, FL 33619, as observed on or about 06/27/2012, a bench grinder used by employees in the machine shop had a 1/2 inch gap between the abrasive wheel periphery and the guard.
Recent events (2)
- — I (S) $2040
- — Z (S) $3400
1910.303 B02
- Issued
- Aug 29, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: a) For the Mitek facility at 1801 Massaro Blvd., Tampa, FL 33619, as observed on or about 06/27/2012, a flexible power strip was used to supply electricity to equipment such as, but not limited to, fans and power tools in the machine shop. The power strip was not designed for industrial use of this kind.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Mitek USA, INC.
View Mitek USA, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332116)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 334925781.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.