OSHA Inspection: MATTHEW T. KING DBA DURANGO CUSTOM BUILDERS

Issued

Aug 29, 2012

Abate by

Aug 30, 2012

Penalty

Initial $2,800 · Current $2,800

General-duty citation text

29 CFR 1926.451(c)(2)(iv): Front-end loaders and similar pieces of equipment were used to support scaffold platforms when they were not specifically designed by the manufacturer for such use:    a) Employees were exposed to the hazard of falling approximately 16 feet where a scaffold platform was supported by a forklift when not designed by the manufacturer for such use.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

Aug 29, 2012

Abate by

Aug 30, 2012

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1926.452(k)(5): Scaffold platforms were bridged on to another:    a) Employees were exposed to the hazard of falling approximately 16 feet where scaffold platforms were bridged together.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

Aug 29, 2012

Abate by

Aug 30, 2012

Penalty

Initial $2,800 · Current $2,800

General-duty citation text

29 CFR 1926.451(e)(1): Safe access was not provided to scaffold platforms when the platforms were more than 2 feet above or below the point of access:    a) Employees were exposed to the hazard of falling approximately 16 feet where safe access was not provided to ladder jack scaffolding.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

Aug 29, 2012

Abate by

Aug 30, 2012

Penalty

Initial $2,000 · Current $2,000

General-duty citation text

29 CFR 1926.451(f)(7): Scaffolds were not erected, moved, dismantled, or altered, by trained and experienced employees under the supervision and direction of a competent person qualified in scaffold erection, moving, dismantling or alteration:    a) Ladder jack scaffolding provided for employee use was not erected under the supervision and direction of a competent person.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

Aug 29, 2012

Abate by

Aug 30, 2012

Penalty

Initial $2,800 · Current $2,800

General-duty citation text

29 CFR 1926.451(g)(1)(i): Each employee on a boatswain's chair, catenary scaffold, float scaffold, needle beam scaffold, or ladder jack scaffold, was not protected by a personal fall arrest system:    a) Employees were exposed to the hazard of falling approximately 16 feet while working from ladder jack scaffolding without fall protection.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

Aug 29, 2012

Abate by

Aug 30, 2012

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1926.602(d) NOTE: The requirements applicable to construction work under this section are identical to those set forth at 29 CFR 1910.178(l) of this chapter.    29 CFR 1910.178(l)(6): The employer did not certify that each operator had been trained and evaluated as required by this paragraph (l):    a) The employer did not certify that each forklift operator had been trained and evaluated.    In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).