OSHA Inspection: MATTHEW T. KING DBA DURANGO CUSTOM BUILDERS

Issued

May 13, 2013

Abate by

Jun 14, 2013

Penalty

Initial $440 · Current $440

General-duty citation text

29 CFR 1903.19(c)(1):  The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated:     Matthew T. King dba Durango Custom Builders failed to certify to OSHA within 10 calendar days after the abatement date that each of the following cited violations had been corrected:     Citation Number                     Item Number                           Abatement Date  01                                            01                                            1/28/2013  01                                            02                                            2/15/2013    In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

Jan 22, 2013

Abate by

Jan 28, 2013

Penalty

Initial $2,200 · Current $2,200

General-duty citation text

29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):     a) Employees were not protected from the hazard of falling while working from a roof deck having a pitch of 10/12 with a ground to eave height of approximately 12 feet.    a) Employees were not protected from the hazard of falling while working from a roof deck having a pitch of 6/12 with a ground to eave height of approximately 12 feet.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

Jan 22, 2013

Abate by

Feb 15, 2013

Penalty

Initial $2,200 · Current $2,200

General-duty citation text

29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:    a) The employer did not provide fall protection training to each employee exposed to fall hazards during carpentry work at the site.    In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).