BOISE, ID —
OSHA Inspection: TAHOE HOMES, LLC
Programmed Related inspection · Safety discipline
At a glance
On , OSHA opened a programmed Related safety inspection of TAHOE HOMES, LLC in LOT 4, BLOCK 1 E. MILL STATION DRIVE, BOISE, ID 83716 (NAICS 236115). OSHA activity number 335197158.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- TAHOE HOMES, LLC
- Site address
- LOT 4, BLOCK 1 E. MILL STATION DRIVE
- City
- BOISE
- State
- ID
- ZIP
- 83716
- Mailing
- 1979 N. LOCUS GROVE ROAD, MERIDIAN, ID 83646
What kind of inspection was it?
- Inspection type
- Programmed Related (J)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236115
- Employees
- 1
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.20 B01
- Issued
- Aug 6, 2012
- Abate by
- Aug 31, 2012
- Penalty
- Initial $1,200 · Current $0 Reduced
General-duty citation text
29 CFR 1926.20(b)(1): The employer did not initiate and maintain such programs as may be necessary to comply with this part. a) One of four single family residential structures in the Mill District Subdivision, Lot 14, Block 1; On June 7, 2012 and at times prior thereto, the employer had not developed and/or implemented an accident prevention program to address hazards to which their employees and/or the employees of subcontractors are exposed. Hazards include but are not limited to fall protection, working from ladders, scaffolds and use of both stationary/portable power tools. Note: Abatement certification IS required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $1200
1926.20 B02
- Issued
- Aug 6, 2012
- Abate by
- Aug 31, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.20(b)(2): The employer did not initiate and maintain a safety program which provides for frequent and regular inspections of jobsites, materials, and equipment to be made by a competent person: a) One of four single family residential structures in the Mill District Subdivision, Lot 14, Block 1; On June 7, 2012 and at times prior thereto, the employer did not perform frequent and regular inspections of sites that they controlled to identify, correct and/or eliminate hazards to which their employees and/or the employees of subcontractors are exposed. Hazards included but are not limited to fall protection, working from ladders, scaffolds and use of both stationary/portable power tools. Note: Abatement certification IS required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.21 B02
- Issued
- Aug 6, 2012
- Abate by
- Aug 31, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.21(b)(2): The employer did not instruct each employee in the recognition and avoidance of unsafe conditions and the regulations applicable to his/her environment to control or eliminate any hazards or other exposure to illness or injury: a) One of four single family residential structures in the Mill District Subdivision, Lot 14, Block 1; On June 7, 2012 and at times prior thereto, the employer does not provide applicable training and/or instruction associated with employees visiting/working at residential construction sites. Note: Abatement certification IS required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.304 I01
- Issued
- Aug 6, 2012
- Penalty
- Initial $0 · Current $600
General-duty citation text
1926.304(d)(i)(1): A circular hand-fed ripsaw was not guarded by a hood which completely enclosed the portion of the saw above the table and the portion of the saw above the material being cut. a) Garage area of a residential structure; On or about June 7, 2012 and at times prior thereto, as the controlling employer, the wood flooring subcontractor's employee was not prevented from free-hand ripping laminate flooring on a Ryobi 10-inch table saw without the guard being installed. Note: Abatement certification is NOT required for this item.
Recent events (2)
- — I (S) $600
- — Z (S) $0
1926.28 A
- Issued
- Aug 6, 2012
- Penalty
- Initial $1,200 · Current $600 Reduced
General-duty citation text
29 CFR 1926.28(a): The employer did not require the wearing of appropriate personal protective equipment in all operations where there is an exposure to hazardous conditions. a) Garage area of a residential structure; On or about June 7, 2012 and at times prior thereto, as the controlling employer, the use of eye protection by the wood flooring subcontractor's employee utilizing an unguarded table saw to cut laminate flooring was not enforced. Note: Abatement certification is NOT required for this item.
Recent events (2)
- — I (S) $600
- — Z (S) $1200
More inspections at Tahoe Homes, LLC
View Tahoe Homes, LLC's full OSHA safety record →
More inspections in this industry (NAICS 236115)
More inspections in ID
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 335197158.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.