Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,196,991Inspections Most recent open 2026-08-24 Last loaded 2026-08-27

OSHA Inspection: OLYMPIC STEEL INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of OLYMPIC STEEL INC. in 1801 BEDFORD AVENUE, NORTH KANSAS CITY, MO 64116 (NAICS 423510). OSHA activity number 335423612.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Olympic Steel INC. for free Get an email when a new federal OSHA severe-injury report for Olympic Steel INC. is published. One employer, no account, unsubscribe in one click.
Establishment
OLYMPIC STEEL INC.
Site address
1801 BEDFORD AVENUE
City
NORTH KANSAS CITY
State
MO
ZIP
64116
Mailing
6425 STATE STREET, BETTENDORF, IA 52722
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
423510
Employees
4
Ownership type
Private (A)

11 citations on file for this inspection.

1910.178 L01 II

Deleted Serious Gravity 5 2 instances 2 exposed
Issued
Aug 31, 2012
Abate by
Sep 30, 2012
Penalty
Initial $4,000 · Current $0 Reduced
29 CFR 1910.178(l)(1)(ii): The employer did not ensure that each operator had successfully completed the training required by paragraph (l), except as permitted by paragraph (l)(5), prior to permitting an employee to operate a powered industrial truck:    (a) 1801 Bedford Avenue, North Kansas City, Missouri:  Two employees had not been trained to operate a forklift prior to being required to operate the forklift.
Recent events (2)
  • · I (S) $0
  • · Z (S) $4000

1910.179 B06 I

Serious Gravity 5 2 instances 2 exposed
Issued
Aug 31, 2012
Abate by
Dec 28, 2012
Penalty
Initial $5,000 · Current $3,000 Reduced
29 CFR 1910.179(b)(6)(i): A minimum clearance of 3 inches overhead and 2 inches laterally was not provided and maintained between crane(s) and obstructions:    (a) 1801 Bedford Avenue, North Kansas City, Missouri:  The Southwest Crane did not have adequate clearance between two of the overhead lights and the crane carriage as two of the light fixtures were bent and broken.
Recent events (2)
  • · I (S) $3000
  • · Z (S) $5000

1910.179 F04 IV

Serious Gravity 5 1 instance 2 exposed
Issued
Aug 31, 2012
Abate by
Dec 28, 2012
Penalty
Initial $0 · Current $0
29 CFR 1910.179(f)(4)(iv): The wearing surface of all brake drum(s) or disc(s) was not smooth:    (a) 1801 Bedford Avenue, North Kansas City, Missouri:  The brakes for the North West crane were worn or damaged as the crane was slow to come to a stop.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1910.179 H04

Serious Gravity 5 1 instance 2 exposed
Issued
Aug 31, 2012
Abate by
Dec 28, 2012
Penalty
Initial $0 · Current $0
29 CFR 1910.179(h)(4): Hooks did not meet the manufacturer's recommendations    (a) The South East Crane the safety latch is missing on the hook.    (b) The South West Crane the safety latch is missing on the hook.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1910.179 L03 I

Serious Gravity 5 2 instances 2 exposed
Issued
Aug 31, 2012
Abate by
Dec 28, 2012
Penalty
Initial $0 · Current $0
29 CFR 1910.179(l)(3)(i): Unsafe condition(s) disclosed during the frequent or periodic inspection(s) required by 29 CFR 1910.179(j) were not corrected before operation of the crane(s) was resumed:    (a) The North West crane had deficiencies from the keyway being worn, the pinion coupling was loose or damaged and was not corrected before the operation of the crane was resumed.    (b) The North East crane had deficiencies from the directional contactors being damaged and was not corrected before the operation of the crane was resumed. The load block sheave spacers are missing, and the second speed contactors are damaged.    (c) The South East crane had deficiencies from the equalizer sheave spacers are missing, and there are pitted and burnt contacts. The load block sheave spacers are missing, and the second speed contactors are damaged.    (d) The South West crane has an oil leak and was not corrected and the crane has not been taken out of service. The sheave is damaged, and sheaves do not meet manufacturer's specifications. The conductor bar insulation is missing or damaged.  The resistor guard is damaged.  The bridge machinery guard is missing or damaged.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1910.179 M01

Serious Gravity 5 1 instance 1 exposed
Issued
Aug 31, 2012
Abate by
Dec 28, 2012
Penalty
Initial $0 · Current $0
29 CFR 1910.179(m)(1): Any deterioration, resulting in appreciable loss of original strength, were not being carefully observed and determination made as to whether further use of the rope would constitute a safety hazard:    (a) The South East crane the rope was damaged and the crane was not taken out of service.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1910.303 F02

Serious Gravity 5 4 instances 2 exposed
Issued
Aug 31, 2012
Abate by
Sep 30, 2012
Penalty
Initial $4,000 · Current $2,100 Reduced
29 CFR 1910.303(f)(2): Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident:    (a) 1801 Bedford Avenue, North Kansas City, Missouri: The breaker boxes were not all labeled to indicate its purpose, such as, but not limited to, the Breaker box on the East end, the Breaker box on the south end, and the main panel of breaker boxes on the north wall.    (b) Two 480 volt breaker boxes were in the on position on the south wall labelled "charger".  It was not evident what the breaker boxes are actually for as there are no forklift chargers in the area.
Recent events (2)
  • · I (S) $2100
  • · Z (S) $4000

1910.305 A01 I

Serious Gravity 1 1 instance 2 exposed
Issued
Aug 31, 2012
Abate by
Sep 30, 2012
Penalty
Initial $3,000 · Current $2,100 Reduced
29 CFR 1910.305(a)(1)(i): Metal raceways, cable armor, and other metal enclosures for conductors were not connected to all boxes, fittings, and cabinets to provide effective electrical continuity:    (a) 1801 Bedford Avenue, North Kansas City, Missouri:  The conduit was not connected for the conduit by the propane storage and north east overhead door.
Recent events (2)
  • · I (S) $2100
  • · Z (S) $3000

1910.305 B02 I

Deleted Serious Gravity 1 1 instance 3 exposed
Issued
Aug 31, 2012
Abate by
Sep 30, 2012
Penalty
Initial $3,000 · Current $0 Reduced
29 CFR 1910.305(b)(2)(i): Each outlet box in completed installations did not have a cover, faceplate, or fixture canopy:    (a) 1801 Bedford Avenue, North Kansas City, Missouri:  The outlet box in the Breakroom behind the trash can did not have a faceplate.
Recent events (2)
  • · I (S) $0
  • · Z (S) $3000

1910.305 G01 IV B

Deleted Serious Gravity 1 1 instance 2 exposed
Issued
Aug 31, 2012
Penalty
Initial $3,000 · Current $0 Reduced
29 CFR 1910.305(g)(1)(iv)(B): Flexible cords and cables were run through holes in walls, ceilings, or floors.    (a) 1801 Bedford Avenue, North Kansas City, Missouri:  An electrical cord for the compressor for the saw was run through a hole in a beam.
Recent events (2)
  • · I (S) $0
  • · Z (S) $3000

1910.1200 E01

Serious Gravity 1 2 instances 2 exposed
Issued
Aug 31, 2012
Abate by
Sep 30, 2012
Penalty
Initial $3,000 · Current $2,100 Reduced
29 CFR 1910.1200(e)(1): Employer had not developed or implemented a written hazard communication program included the requirements outlined in 29 CFR 1910.1200(e)(1)(i) and (e)(1)(ii):     (a) 1801 Bedford Avenue, North Kansas City, Missouri:  Employees are exposed to chemicals, such as, but not limited to Picoguard 6210, which is flammable and there was not a written hazard communication program available to employees at this location as the manager did not know how to access it.  The hazard communication program needs to include, labeling and other forms of warning, how material safety data sheets are to be obtained and maintained, and employee information and training.
Recent events (2)
  • · I (S) $2100
  • · Z (S) $3000

View Olympic Steel INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 335423612.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.