IRVING, TX —
OSHA Inspection: NEW HORIZON CONSTRUCTION
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of NEW HORIZON CONSTRUCTION in 208 ROLLING FORK BEND, IRVING, TX 75039 (NAICS 238350). OSHA activity number 335489787.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- NEW HORIZON CONSTRUCTION
- Site address
- 208 ROLLING FORK BEND
- City
- IRVING
- State
- TX
- ZIP
- 75039
- Mailing
- 690 BURGESS ROAD, CLEBURNE, TX 76031
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238350
- Employees
- 3
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.102 A01
- Issued
- Nov 6, 2012
- Abate by
- Nov 19, 2012
- Penalty
- Initial $1,760 · Current $1,760
General-duty citation text
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents: This violation occurred on July 26, 2012, at a workplace located at 208 Rolling Fork Bend, Irving, TX 75039, where at least three (3) employees were using Paslode nailers to perform cornice installation and were not protected from eye injuries by wearing safety glasses.
Recent events (1)
- — Z (S) $1760
1926.100 A
- Issued
- Nov 6, 2012
- Abate by
- Nov 19, 2012
- Penalty
- Initial $3,520 · Current $3,520
General-duty citation text
29 CFR 1926.100(a): Employees were not protected by protective helmets while working in areas where there was a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns: This violation occurred on July 26, 2012, at a workplace located at 208 Rolling Fork Bend, Irving, TX 75039, where at least three (3) employees, who were working at various elevations under construction activities, were not protected from head injuries by wearing hard hats. NEW HORIZON WAS REVIOUSLY CITED FOR A VIOLATION OF THIS OCCUPATIONAL SAFETY AND HEALTH STANDARD OR ITS EQUIVALENT STANDARD 1926.100(a) WHICH WAS CONTAINED IN OSHA INSPECTION NUMBER 312122021, CITATION NUMBER 1, ITEM NUMBER 1, ISSUED ON 09/04/2009, AND WAS AFFIRMED AS A FINAL ORDER ON 09/15/2009, WITH RESPECT TO A WORKPLACE LOCATED AT 7322 COMAL, IRVING, TX.
Recent events (1)
- — Z (R) $3520
1926.451 B02
- Issued
- Nov 6, 2012
- Abate by
- Nov 19, 2012
- Penalty
- Initial $6,160 · Current $6,160
General-duty citation text
29 CFR 1926.451(b)(2): Except as provided in paragraphs (b)(2)(i) and (b)(2)(ii) of this section, each scaffold platform and/or walkway was not at least 18 inches (46 cm) wide: This violation occurred on July 26, 2012, at a workplace located at 208 Rolling Fork Bend, Irving, TX 75039, where at least one (1) employee, who was working from job-made scaffold platform 10-inches wide, was exposed to the hazard of falling to the ground below. NEW HORIZON WAS REVIOUSLY CITED FOR A VIOLATION OF THIS OCCUPATIONAL SAFETY AND HEALTH STANDARD OR ITS EQUIVALENT STANDARD 1926.451(b)(2) WHICH WAS CONTAINED IN OSHA INSPECTION NUMBER 312122021, CITATION NUMBER 1, ITEM NUMBER 2a, ISSUED ON 09/04/2009, AND WAS AFFIRMED AS A FINAL ORDER ON 09/15/2009, WITH RESPECT TO A WORKPLACE LOCATED AT 7322 COMAL , IRVING, TX.
Recent events (1)
- — Z (R) $6160
1926.451 G01
- Issued
- Nov 6, 2012
- Abate by
- Nov 19, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.451(g)(1): Employees on scaffolds more than 10 feet (3.1 m) above a lower level were not protected from falling to that lower level by fall protection established in paragraphs (g)(1)(i)-(vii) of this section: This violation occurred on July 26, 2012, at a workplace located at 208 Rolling Fork Bend, Irving, TX 75039, where at least one (1) employee, who was working from job-made scaffold more than 10 feet, was not protected from falling to the ground below. NEW HORIZON WAS REVIOUSLY CITED FOR A VIOLATION OF THIS OCCUPATIONAL SAFETY AND HEALTH STANDARD OR ITS EQUIVALENT STANDARD 1926.451(g)(1) WHICH WAS CONTAINED IN OSHA INSPECTION NUMBER 312122021, CITATION NUMBER 1, ITEM NUMBER 2b, ISSUED ON 09/04/2009, AND WAS AFFIRMED AS A FINAL ORDER ON 09/15/2009, WITH RESPECT TO A WORKPLACE LOCATED AT 7322 COMAL , IRVING, TX.
Recent events (1)
- — Z (R) $0
More inspections at NEW Horizon Construction
View NEW Horizon Construction's full OSHA safety record →
More inspections in this industry (NAICS 238350)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 335489787.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.