Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: BILTMORE COMPANY LLC

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of BILTMORE COMPANY LLC in 1527 W. ALEXANDRIA LN, BOISE, ID 83705 (NAICS 236116). OSHA activity number 336717590.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Biltmore Company LLC — free Get an email when a new federal OSHA severe-injury report for Biltmore Company LLC is published. One employer, no account, unsubscribe in one click.
Site address
1527 W. ALEXANDRIA LN
City
BOISE
State
ID
ZIP
83705
Mailing
3681 N. LOCUST GROVE SUITE 100, MERIDIAN, ID 83646
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
236116
Employees
6
Ownership type
A

5 citations on file for this inspection.

1926.501 B13

Serious Gravity 5 1 instance 2 exposed
Issued
Dec 14, 2012
Abate by
Dec 24, 2012
Penalty
Initial $2,000 · Current $1,400 Reduced
29 CFR 1926.501(b)(13):      Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were the employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501(b):    a) Northeast side at mid-point of the structure; On or about October 4, 2012, and at times prior thereto, the controlling contractor allowed the framing sub-contractors employees to walking on/ work from the tops of the walls while setting trusses without fall protection.     b) Northeast side at mid-point of the roof; On or about October 5, 2012, and at times prior thereto, the controlling contractor allowed the framing sub-contractors employees to walking on/ work from the tops of trusses and sheathing without fall protection.      Note: Abatement certification is required.
Recent events (2)
  • — I (S) $1400
  • — Z (S) $2000

1926.1052 A03

Serious Gravity 1 1 instance 3 exposed
Issued
Dec 14, 2012
Abate by
Dec 24, 2012
Penalty
Initial $1,200 · Current $840 Reduced
29 CFR 1926.1052(a)(3):     Riser height and tread depth were not uniform within each flight of stairs, including any foundation structure used as one or more treads of the stairs.     a) On site at the top of the pre-fabricated stairs, On or about October 5, 2012, and at times prior thereto, the controlling employer, Biltmore Company did not ensure that all stair treads and risers were complete and had a uniform rise and run before allowing employees to use them.     b) At the top of the pre-fabricated stairs that access the second floor landing; On or about October 5, 2012, and at times prior thereto, the controlling employer, Biltmore Company did not ensure that its sub-contractor protected their employees by ensuring that the top stair had a tread.     Note: Abatement certification is required.
Recent events (2)
  • — I (S) $840
  • — Z (S) $1200

1926.1052 C01 II

Serious Gravity 1 1 instance 3 exposed
Issued
Dec 14, 2012
Abate by
Dec 24, 2012
Penalty
Initial $0 · Current $0
29 CFR 1926.1052(c)(1):     Stairways with four or more risers or rising more than 30 inches were not equipped with (i): at least one hand rail; and (ii): One stair rail system along each unprotected side or edge.     a) At the pre-fabricated stairs that access the second floor landing; On or about October 5, 2012, and at times prior thereto, the controlling employer (Biltmore Company) employee and its sub-contractors employees were not protected when using the stairs that did not have a hand rail on either side.     b) At the pre-fabricated stairs that access the second floor landing; On or about October 5, 2012, and at times prior thereto, the controlling employer (Biltmore Company) employee and its sub-contractors employees were not protected when using the stairs that did not have a stair rail system on the open side.      Note; Abatement certification is required.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.1052 C12

Serious Gravity 1 1 instance 3 exposed
Issued
Dec 14, 2012
Abate by
Dec 24, 2012
Penalty
Initial $0 · Current $0
29 CFR 1926.1052(c)(12):     Unprotected sides and edges of stairway landings were not provided with guardrail systems.     a) At the second floor entrance landings to the left of the stairs; On or about October 5, 2012, and at times prior thereto, the controlling employer Biltmore Company employee and framing sub-contractors employees were exposed to a fall hazard when working and walking on the landing that did not have a guard rail to prevent a 9 foot fall onto concrete.    Note: Abatement certification is required.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.20 B02

Other-than-serious 1 instance 3 exposed
Issued
Dec 14, 2012
Abate by
Dec 24, 2012
Penalty
Initial $0 · Current $0
29 CFR 1926.20(b)(2):     Programs did not provide for frequent and regular inspections to be conducted of the job sites, materials, and equipment to be made by competent persons designated by the employer:    a) Throughout the four-plex; On or about October 5, 2012, and at times prior thereto, the employer (Biltmore Construction) did not conducted or document frequent and regular inspections  to identify hazards, including but not limited to, falls from upper levels.      b) Throughout the four-plex; On or about October 5, 2012, and at times prior thereto, the employer  (Biltmore Construction) did not ensure or assign that a competent person to conduct frequent and regular inspections to identify hazards, including but not limited to, falls from upper levels.     Note: Abatement certification & documentation ARE required.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Biltmore Company LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 336717590.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.