BESSEMER, AL —
OSHA Inspection: DBI, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of DBI, INC. in 3031 DUBLIN CIRCLE, BESSEMER, AL 35022 (NAICS 337110). OSHA activity number 337488639.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DBI, INC.
- Site address
- 3031 DUBLIN CIRCLE
- City
- BESSEMER
- State
- AL
- ZIP
- 35022
- Mailing
- 3031 DUBLIN CIRCLE, BESSEMER, AL 35022
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337110
- Employees
- 12
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.212 A01
- Issued
- Jan 24, 2013
- Abate by
- Feb 5, 2013
- Penalty
- Initial $1,600 · Current $1,600
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) On or about 11/19/12 - Shop Area, a Ryobi drill press was not guarded at the bit. (b) On or about 11/19/12 - Shop Area, a Mar-Bel pinch roller had rollers that were not guarded.
Recent events (1)
- — Z (S) $1600
1910.213 D01
- Issued
- Jan 24, 2013
- Abate by
- Feb 5, 2013
- Penalty
- Initial $2,000 · Current $2,000
General-duty citation text
29 CFR 1910.213(d)(1): Circular handfed crosscut table saw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: (a) On or about 11/19/12 - Shop Area, a Jet 10-inch table saw was not guarded.
Recent events (1)
- — Z (S) $2000
1910.213 H01
- Issued
- Jan 24, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(h)(1): Radial saw(s) did not have an upper hood that completely enclosed the upper portion of the blade down to a point including the end of the saw arbor: (a) On or about 11/19/12 - Shop Area, a Hitachi 15-inch radial saw was not guarded at the arbor end.
Recent events (1)
- — Z (S) $0
1910.219 F03
- Issued
- Jan 24, 2013
- Abate by
- Feb 5, 2013
- Penalty
- Initial $2,000 · Current $2,000
General-duty citation text
29 CFR 1910.219(f)(3): Sprocket wheels and chains which were seven 7 feet or less above floors or platforms were not enclosed: (a) On or about 11/19/12 - Shop Area, a Mar-Bel pinch roller had a chain and sprocket that were not guarded.
Recent events (1)
- — Z (S) $2000
1910.1200 G08
- Issued
- Jan 24, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(g)(8): The employer did not maintain copies of the required material safety data sheets for each hazardous chemical in the workplace: (a) On or about 11/19/12 - Throughout the Facility, the employer did not maintain Material Safety Data Sheets for various chemicals used by employees including, but not limited to, MAGNASAND Precat Sealer, Magnaclaw Pre-Cat Primer, and Sherwin-Williams paint.
Recent events (1)
- — Z (O) $0
More inspections at DBI, INC.
View DBI, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 337110)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 337488639.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.