Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: CORRUGATED METALS INC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of CORRUGATED METALS INC in 3575 MORREIM DRIVE, BELVIDERE, IL 61008 (NAICS 332114). OSHA activity number 337592240.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Corrugated Metals INC — free Get an email when a new federal OSHA severe-injury report for Corrugated Metals INC is published. One employer, no account, unsubscribe in one click.
Site address
3575 MORREIM DRIVE
City
BELVIDERE
State
IL
ZIP
61008
Mailing
3575 MORREIM DRIVE, BELVIDERE, IL 61008
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332114
Employees
17
Ownership type
A

5 citations on file for this inspection.

1910.178 Q07

Serious Gravity 5 1 instance 17 exposed
Issued
Feb 22, 2013
Abate by
Mar 29, 2013
Penalty
Initial $1,360 · Current $680 Reduced
29 CFR 1910.178(q)(7):     Industrial trucks were not examined before being placed in service.    On the Yale 15,000 pound forklift, daily inspections were not conducted before operating the forklift truck.    Abatement certification is required for this item in accordance with 29 CFR 1903.19(c).
Recent events (2)
  • — I (S) $680
  • — Z (S) $1360

1910.178 P01

Serious Gravity 1 1 instance 17 exposed
Issued
Feb 22, 2013
Abate by
Apr 10, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.178(p)(1):     If at any time a powered industrial truck is found to be in need of repair, defective, or in any way unsafe, the truck shall be taken out of service until it has been restored to safe operating condition.    On the Yale Forklift Truck, #650567, one of the two straps holding the propane gas tank in place, was defective and the truck was not removed from service.    Abatement certification is required for this item in accordance with 29 CFR 1903.19(c).
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.219 F03

Serious Gravity 5 1 instance 2 exposed
Issued
Feb 22, 2013
Abate by
Mar 29, 2013
Penalty
Initial $1,360 · Current $680 Reduced
29 CFR 1910.219(f)(3):     Sprocket wheels and chains which were seven -7 feet or less above floors or platforms were not enclosed.    On the Bliss 150 ton press, a chain and sprocket whees, on the south side of the machine, by the control panel, were not enclosed.    Abatement certification is required for this item in accordance with 29 CFR 1904.19(c).
Recent events (2)
  • — I (S) $680
  • — Z (S) $1360

1910.305 B01 II

Serious Gravity 5 1 instance 1 exposed
Issued
Feb 22, 2013
Abate by
Mar 29, 2013
Penalty
Initial $1,360 · Current $640 Reduced
29 CFR 1910.305(b)(1)(ii):     Unused openings in boxes, cabinets, or fittings were not effectively closed.    There were two unused openings on the Verson 150 ton mechanical power press, there was one square hole in the electrical control panel, 480 volts and an opening in the knockout type outlet box, 110 volts.    Abatement certification is required for this item in accordance with 29 CFR 1903.19(c).
Recent events (2)
  • — I (S) $640
  • — Z (S) $1360

1910.147 C06 I

Other-than-serious 1 instance 10 exposed
Issued
Feb 22, 2013
Abate by
Mar 29, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.147(c)(6)(i):     The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed.    Corrugated Metals, Inc. did not conduct periodic inspections, at least annually, of their lockout program.    Abatement certification is required for this item in accordance with 29 CFR 1903.19(c).
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Corrugated Metals INC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 337592240.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.