BIRMINGHAM, AL —
OSHA Inspection: FLEETPRIDE, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of FLEETPRIDE, INC. in 2831 2ND AVENUE NORTH, BIRMINGHAM, AL 35203 (NAICS 336340). OSHA activity number 337611727.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FLEETPRIDE, INC.
- Site address
- 2831 2ND AVENUE NORTH
- City
- BIRMINGHAM
- State
- AL
- ZIP
- 35203
- Mailing
- 2831 2ND AVENUE NORTH, BIRMINGHAM, AL 35203
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 336340
- Employees
- 27
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.132 A
- Issued
- May 17, 2013
- Abate by
- May 17, 2013
- Penalty
- Initial $3,300 · Current $1,980 Reduced
General-duty citation text
29 CFR 1910.132(a): Employer did not provide personal protective equipment to be used when necessary whenever hazards capable of causing injury or impairment were encountered. (a) On or about 11/27/12 - at the Rework area, the employer did not provide face protection for employees using an abrasive wheel.
Recent events (3)
- — J (S) $1980
- — C (S) $3300
- — Z (S) $3300
1910.147 C04 I
- Issued
- May 17, 2013
- Abate by
- May 17, 2013
- Penalty
- Initial $4,125 · Current $2,475 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: (a) On or about 11/27/12 - at the Deriveter Machine (D2), a procedure was not utilized to control hazardous energy when employees were changing the block head, part holder and index wheel.
Recent events (3)
- — J (S) $2475
- — C (S) $4125
- — Z (S) $4125
1910.212 A01
- Issued
- May 17, 2013
- Abate by
- May 17, 2013
- Penalty
- Initial $7,000 · Current $4,200 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) On or about 11/27/12 - at the Deriveter Machine (D1) guarding was not provided to protect employees at the point of operation while the deriveter was in operation. (b) On or about 11/27/12 - at the Deriveter Machine (D2), guarding was not provided to protect employees at the point of operation while the deriveter was in operation.
Recent events (3)
- — J (S) $4200
- — C (S) $7000
- — Z (S) $7000
1910.253 B04 III
- Issued
- May 17, 2013
- Abate by
- May 17, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.253(b)(4)(iii): Oxygen cylinders in storage were not separated from fuel-gas cylinders or combustible materials (especially oil or grease), a minimum distance of 20 feet (6.1 m) or by a noncombustible barrier at least 5 feet (1.5 m) high having a fire-resistance rating of at least one half-hour: (a) On or about 11/27/12 - at the Maintenance area, oxygen and acetylene cylinders were stored together on a mobile cart.
Recent events (3)
- — J (O) $0
- — C (O) $0
- — Z (O) $0
1910.305 B01 I
- Issued
- May 17, 2013
- Abate by
- May 17, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(b)(1)(i): Openings through which conductors entered cutout boxes, cabinets, or fittings were not effectively closed: (a) On or about 11/27/2012 - at the Deriveter Machine (D2), the second opening from the top of the control cabinet was not effectively closed where conductors entered the cabinet.
Recent events (3)
- — 3 (O) $0
- — C (O) $0
- — Z (O) $0
1910.305 B01 II
- Issued
- May 17, 2013
- Abate by
- May 17, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed: (a) On or about 11/27/2011 - at Washer "W01", an unused opening on the control cabinet was not effectively closed. (b) On or about 11/27/2011 - at Shot Blaster "B3", an unused opening on the control cabinet was not effectively closed.
Recent events (3)
- — 3 (O) $0
- — C (O) $0
- — Z (O) $0
More inspections at Fleetpride, INC.
View Fleetpride, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 336340)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 337611727.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.