OSHA Inspection: CROUNSE CORPORATION

Issued

2013-01-25 00:00:00

Abate by

2013-02-21 00:00:00

Penalty

Initial $3060.00 · Current $1836.00 Reduced

General-duty citation text

29 CFR 1915.55(a)(7):     An unsuitable truck, chain or other steadying device was used to keep cylinders from being knocked over while in use.    a) Storage Shop - On or about 1/17/13, employees were exposed to fire/explosion hazards when oxygen and acetylene cylinders were not secured to prevent them from being knocked over    In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

2013-01-25 00:00:00

Abate by

2013-02-21 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.22(d)(1):     On every building or other structure, or part thereof, used for mercantile, business, industrial or storage purposes, the loads approved by the building official were not marked on plates of approved design and securely affixed in a conspicuous place in each space to which they relate.    a) Storage Shop - On or about 1/17/13, the area above the storage shelves used for storage was not marked with the load rating.    In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

2013-01-25 00:00:00

Abate by

2013-03-14 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.176(b):     Storage of material created a hazard:    a) Storage shop - On or about 1/17/13, storage racks were not secured to the floor.    In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

2013-01-25 00:00:00

Abate by

2013-02-21 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.212(b):     Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving:    a) Storage Shop - On or about/17/13, the drill press was not anchored to floor to prevent movement.    In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).