FULTON, NY —
OSHA Inspection: UNIVERSAL METAL WORKS, LLC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of UNIVERSAL METAL WORKS, LLC. in 159 HUBBARD STREET, FULTON, NY 13069 (NAICS 332312). OSHA activity number 338364714.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- UNIVERSAL METAL WORKS, LLC.
- Site address
- 159 HUBBARD STREET
- City
- FULTON
- State
- NY
- ZIP
- 13069
- Mailing
- 159 HUBBARD STREET, FULTON, NY 13069
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332312
- Employees
- 23
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.157 G02
- Issued
- Apr 18, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.157(g)(2): The educational program to familiarize employees with the general principles of fire extinguisher use and the hazards involved with incipient stage fire fighting was not provided to all employees upon initial employment, and at least annually thereafter: a)Throughout the facility, on or about 2/6/13: Training was not provided to employees on the use of fire extinguishers and the hazards involved with incipient stage fire fighting. * ABATEMENT NOTE: By this date the employer must either correct the alleged violation or implement a Fire Safety Policy; as outlined in 29 CFR 1910.38(a) and .39 which includes the evacuation requirements of 29 CFR 1910.157(b).
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.157 C04
- Issued
- Apr 15, 2013
- Penalty
- Initial $1,020 · Current $663 Reduced
General-duty citation text
29 CFR 1910.157(c)(4): Portable fire extinguishers were not maintained in a fully charged and operable condition a) Shop Area, on or about 1/17/13: A fire extinguisher was not in operable condition, it was found discharged.
Recent events (2)
- — I (S) $663
- — Z (S) $1020
1910.157 E03
- Issued
- Apr 15, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.157(e)(3): Portable fire extinguishers were not subjected to an annual maintenance check: a) Production Floor, on or about 1/17/13: Several portable fire extinguishers did not have annual inspections. Last inspection conducted was November 2011.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A01
- Issued
- Apr 15, 2013
- Penalty
- Initial $1,360 · Current $884 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created point of operation, rotating parts, and flying chips: a) Fabrication Area, on or about 1/17/13: Edlund Drill Press was not provided with a chuck and tool guard. b) Fabrication Area, on or about 1/17/13: Two Baldor Sanders had unguarded nip points on the sanding belt and the rotating pulley's were not guarded. c) Machining Area, on or about 1/17/13: Bridgeport Drill Press was not provided with a chuck and tool guard. d) Machining Area, on or about 1/17/13: Bradford Lathe, the rotating chuck was not guarded. e) Machining Area, on or about 1/17/13: Two Powermatic Drill Presses were not provided with a chuck and tool guard.
Recent events (2)
- — I (S) $884
- — Z (S) $1360
1910.303 G02 I
- Issued
- Apr 15, 2013
- Penalty
- Initial $1,700 · Current $1,105 Reduced
General-duty citation text
29 CFR 1910.303(g)(2)(i): Live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by approved cabinets or other forms of approved enclosures, or other means listed under this provision: a) Fabricator Area, on or about 1/17/13: A 120/240 volt breaker panel box PPL-2 had one blank missing. b) Fabricator Area, on or about 1/17/13: A 240/480 volt breaker panel box PP-2 had one blank missing. c) Machining Area, on or about 1/17/13: A 240/480 volt breaker panel box PP-3 had five blanks missing.
Recent events (2)
- — I (S) $1105
- — Z (S) $1700
More inspections at Universal Metal Works, LLC.
View Universal Metal Works, LLC.'s full OSHA safety record →
More inspections in this industry (NAICS 332312)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338364714.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.