REED POINT, MT —
OSHA Inspection: DGO, INC.
Referral inspection · Health discipline
At a glance
On , OSHA opened a referral health inspection of DGO, INC. in 42 SAWMILL ROAD, REED POINT, MT 59069 (NAICS 321113). OSHA activity number 338929227.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DGO, INC.
- Site address
- 42 SAWMILL ROAD
- City
- REED POINT
- State
- MT
- ZIP
- 59069
- Mailing
- P O BOX 56, REED POINT, MT 59069
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321113
- Employees
- 7
- Ownership type
- A
Citations
2 citations on file for this inspection.
1910.95 C01
- Issued
- Mar 5, 2013
- Abate by
- Mar 29, 2013
- Penalty
- Initial $2,000 · Current $1,400 Reduced
General-duty citation text
29 CFR 1910.95(c)(1): The employer did not administer a continuing, effective hearing conservation program as described in 29 CFR 1910.95 (c) through (o) whenever employee noise exposures equal or exceed an 8-hour time-weighted average sound level of 85 decibels measured on the A scale, or equivalently a dose of fifty percent: (a) Trim saw Area: On or about March 1, 2013, and at times prior thereto, an employee working around the trim saw and sorting roughhewn lumber was exposed to continuous noise levels in excess of the allowable 8-hour Time Weighted Average (TWA) sound level of 85 dbA. The employer did not implement an effective hearing conservation program in that baseline / annual audiometric testing was not conducted. Noise sampling performed for 399 minutes indicated exposure to a 71.62% noise dose which is equivalent to approximately 87.5 dbA. Zero exposure was assumed for the 81 minutes not sampled. (b) Beam sizing and Notch Area: On or about March 1, 2013, and at times prior thereto, an employee using the Notch saw and the Beam cutting saw was exposed to continuous noise levels in excess of the allowable 8-hour Time Weighted Average (TWA) sound level of 85 dbA. The employer did not implement an effective hearing conservation program in that baseline / annual audiometric testing was not conducted. Noise sampling performed for 411 minutes indicated exposure to a 67.42% noise dose which is equivalent to approximately 87.1 dbA. Zero exposure was assumed for the 69 minutes not sampled.
Recent events (2)
- — I (S) $1400
- — Z (S) $2000
1910.95 D01
- Issued
- Mar 5, 2013
- Abate by
- Mar 29, 2013
- Penalty
- Initial $2,000 · Current $0 Reduced
General-duty citation text
29 CFR 1910.95(d)(1): When information indicated that any employee's exposure equaled or exceed the 8-hour time-weighted average of 85 decibels, the employer did not develop and implement a monitoring program: (a) Saw Mill: On or about March 1, 2013, and at times prior the Company did not implement a monitoring program in for employees working around the Saw Mill saws, including but not limited to the Main Saw, the Trim saws and the Notch saw.
Recent events (2)
- — I (S) $0
- — Z (S) $2000
More inspections at DGO, INC.
View DGO, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321113)
More inspections in MT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338929227.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.