EAST PEORIA, IL —
OSHA Inspection: HAGEL METAL FABRICATION, INC.
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of HAGEL METAL FABRICATION, INC. in 2001 EAST WASHINGTON STREET, EAST PEORIA, IL 61611 (NAICS 332312). OSHA activity number 338947146.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- HAGEL METAL FABRICATION, INC.
- Site address
- 2001 EAST WASHINGTON STREET
- City
- EAST PEORIA
- State
- IL
- ZIP
- 61611
- Mailing
- 2001 EAST WASHINGTON STREET, EAST PEORIA, IL 61611
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332312
- Employees
- 83
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.107 L04 I
- Issued
- Aug 21, 2013
- Penalty
- Initial $4,000 · Current $1,000 Reduced
9135
General-duty citation text
29 CFR 1910.107(l)(4)(i): All areas were not kept free of the accumulation of powder coating dust: Employees were engaged in powder coating operations in a Nordson Excel 2000 Powder Spray Booth and powder coating dust escaped the booth and accumulated on the equipment, floors and walls surrounding the powder coating booth area.
Recent events (3)
- — F (S) $1000
- — C (S) $4000
- — Z (S) $4000
1910.134 C01
- Issued
- Aug 21, 2013
- Abate by
- Oct 8, 2013
- Penalty
- Initial $3,000 · Current $1,000 Reduced
9135
General-duty citation text
29 CFR 1910.134(c)(1): A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use: Employees working on the powder coating line were required to wear filtering facepiece respiratory protection and wore tight-fitting elastomeric respirators voluntarily and the employer had not developed and implemented a written respiratory protection program.
Recent events (3)
- — F (S) $1000
- — C (S) $3000
- — Z (S) $3000
1910.134 E01
- Issued
- Aug 21, 2013
- Abate by
- Oct 8, 2013
- Penalty
- Initial $0 · Current $0
9135
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace. Employees working on the powder coating line were required to wear filtering facepiece respiratory protection or tight-fitting elastomeric half-mask respirators voluntarily and the employer had not provided medical evaluations prior to requiring the employees to wear respiratory protection in the workplace.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.134 F02
- Issued
- Aug 21, 2013
- Abate by
- Oct 8, 2013
- Penalty
- Initial $0 · Current $0
9135
General-duty citation text
29 CFR 1910.134(f)(2): Employee(s) using tight-fitting facepiece respirators were not fit tested prior to initial use of the respirator: Employees working on the powder coating line were required to wear filtering facepiece respiratory protection or tight-fitting elastomeric half-mask respirator voluntary and the employer had not provided fit-testing prior to requiring the employees to wear respiratory protection in the workplace.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.134 K03
- Issued
- Aug 21, 2013
- Abate by
- Oct 8, 2013
- Penalty
- Initial $0 · Current $0
9135
General-duty citation text
29 CFR 1910.134(k)(3): Training was not provided prior to requiring employees to use a respirator in the workplace: Employees working on the powder coating line were required to wear filtering facepiece respiratory protection or tight-fitting half mask elastomeric respirators voluntarily and the employer had not provided respiratory protection training prior to requiring the employees to wear respiratory protection in the workplace.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
More inspections at Hagel Metal Fabrication, INC.
View Hagel Metal Fabrication, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332312)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338947146.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.