TAMUNING, GU —
OSHA Inspection: MICRONESIAN HOSPITALITY, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of MICRONESIAN HOSPITALITY, INC. in 360 CHALAN PASAHERU ROUTE 10-A, TAMUNING, GU 96913 (NAICS 561520). OSHA activity number 339008815.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MICRONESIAN HOSPITALITY, INC.
- Site address
- 360 CHALAN PASAHERU ROUTE 10-A
- City
- TAMUNING
- State
- GU
- ZIP
- 96913
- Mailing
- 360 CHALAN PASAHERU ROUTE 10-A, TAMUNING, GU 96913
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 561520
- Employees
- 82
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.253 B04 III
- Issued
- Sep 10, 2013
- Abate by
- Sep 16, 2013
- Penalty
- Initial $2,295 · Current $1,721 Reduced
General-duty citation text
29 CFR 1910.253(b)(4)(iii): Oxygen cylinders in storage were not separated from fuel-gas cylinders or combustible materials (especially oil or grease), a minimum distance of 20 feet: a) Body Shop - Noted on or about 4/17/13 and at times prior thereto, two oxygen cylinders and three acetylene cylinders were stored together when not in use.
Recent events (2)
- — I (S) $1721.25
- — Z (S) $2295
1910.303 G01
- Issued
- Sep 10, 2013
- Abate by
- Sep 16, 2013
- Penalty
- Initial $2,295 · Current $1,721 Reduced
General-duty citation text
29 CFR 1910.303(g)(1): Sufficient access and working space was not provided and maintained about all electric equipment (operating at 600 volts, nominal, or less to ground) to permit ready and safe operation and maintenance of such equipment: a) Body Shop - Noted on or about 4/17/13 and at times prior thereto, an electrical panel board was blocked with tools and a waste drum and did not permit a minimum 3-foot clearance.
Recent events (2)
- — I (S) $1721.25
- — Z (S) $2295
1910.334 A02 II
- Issued
- Sep 10, 2013
- Abate by
- Sep 24, 2013
- Penalty
- Initial $2,295 · Current $1,721 Reduced
General-duty citation text
29 CFR 1910.334(a)(2)(ii): There was a defect or evidence of damage that could have exposed an employee to injury and the defective or damaged item was not removed from service: a) Mechanics Shop - Noted on or about 4/17/13 and at times prior thereto, power cords energizing a Midtronics battery charger and a floor fan were damaged thereby exposing the live inner conductors.
Recent events (2)
- — I (S) $1721.25
- — Z (S) $2295
1910.22 A01
- Issued
- Sep 10, 2013
- Abate by
- Oct 3, 2013
- Penalty
- Initial $1,800 · Current $1,350 Reduced
General-duty citation text
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms, and service rooms shall be kept clean and orderly and in a sanitary condition. a) Vehicle Maintenance Shops - Noted on or about 4/17/13 and at times prior thereto, shop floors had extension cords, chop saws, various metal parts, and boxes on the floor creating slipping and tripping hazards. Micronesian Hospitality Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.22 (a) (1), which was contained in OSHA inspection number 313117707, citation number 2, item number 1 and was affirmed as a final order on August 21, 2009 with respect to a workplace located at 360 Chalan Pasaheru, Rt. 10-A, Tamuning, GU 96913.
Recent events (2)
- — I (R) $1350
- — Z (R) $1800
1910.215 B09
- Issued
- Sep 10, 2013
- Abate by
- Sep 24, 2013
- Penalty
- Initial $7,200 · Current $0 Reduced
General-duty citation text
29 CFR 1910.215(b)(9): Guard for abrasive wheel machine where the operator stands in front of the machine was not constructed so that the peripheral protecting member could be adjusted to the constantly decreasing diameter of the wheel: a) Maintenance Shop, outside - Noted on or about 4/17/13 and at times prior thereto, a bench grinder was missing the tongue guard. Micronesian Hospitality Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.215 (b) (9), which was contained in OSHA inspection number 313117707, citation number 1, item number 1B and was affirmed as a final order on August 21, 2009 with respect to a workplace located at 360 Pasaheru, Rt. 10-A, Tamuning, GU 96913.
Recent events (2)
- — I (R) $0
- — Z (R) $7200
More inspections at Micronesian Hospitality, INC.
View Micronesian Hospitality, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 561520)
More inspections in GU
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339008815.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.