OSHA Inspection: USDA FOREST SERVICE - SAN BERNARDINO NF

Issued

Jul 3, 2013

Abate by

Jul 30, 2013

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.22(d)(1): On every building or other structure, or part thereof, used for mercantile, business, industrial or storage purposes, the loads approved by the building official were not marked on plates of approved design and securely affixed in a conspicuous place in each space to which they relate.  Garage: On or about 03JUN13, the upper level of the shop was used for material storage without posting the load limit plate.

Issued

Jul 3, 2013

Abate by

Jul 30, 2013

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.23(c)(1): Open-sided floors and/or platforms four feet or more above adjacent floor or ground level were not guarded with standard railings (or equivalent) and toeboards:  Garage: On or about 03JUN13, employees were exposed to struck by hazards at the entrance of the offices and storage room when passing beneath the upper level where toe boards were not used to prevent objects from falling from the open platform.

Issued

Jul 3, 2013

Abate by

Jul 30, 2013

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.157(c)(4): Portable fire extinguishers were not kept in their designated places when not being used:  Garage: On or about 03JUN13, three fire extinguishers were on the floor or setting on tables and not mounted in a designated location, exposing employees to delay in locating the fire extinguisher in the event of fire.

Issued

Jul 3, 2013

Abate by

Jul 30, 2013

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.178(a)(4): Modifications and additions which affect capacity and safe operation of powered industrial truck were performed by the employer without the manufacturer's prior written approval:    Garage: On or about 03JUN13, the employer provided a maintenance platform for attachment to a forklift to lift employees to an upper level in the garage.

Issued

Jul 3, 2013

Abate by

Jul 30, 2013

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.303(b)(1): Electrical equipment was not free from recognized hazards that were likely to cause death or serious physical harm to employees, in that the employer did not ensure the safety of the equipment pursuant to the considerations in sections (i) through (viii) of 29 CR 1910.303(b)(1):   Outside electrical room: On or about 3JUN13, an outside light control panel used by employees was located inside an electrical enclosure with exposed electrical conductors.

Issued

Jul 3, 2013

Abate by

Jul 30, 2013

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling:  Garage: On or about 03JUN13, two flexible cord sets were connected in series to provide 120VAC service to a treadmill.

Issued

Jul 3, 2013

Abate by

Jul 30, 2013

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.303(b)(7)(iv): There were damaged parts that could adversely affect safe operation or mechanical strength of the equipment, such as parts that were broken, bent, cut, or deteriorated by corrosion, chemical action, or overheating:   Garage: On or about 03JUN13, four receptacle outlets had broken plastic receivers.

Issued

Jul 3, 2013

Abate by

Jul 30, 2013

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.305(g)(1)(iv)(C): Flexible cords and cables were run through doorways, windows, or similar openings:  Garage: On or about 3JUN13, a flexible cord providing 120VAC service to a scissor lift was run under a vertical door.

Issued

Jul 3, 2013

Abate by

Jul 30, 2013

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.334(a)(2)(ii): If there is a defect or evidence of damage that might expose an employee to injury, the defective or damaged item shall be removed from service, and no employee may use it until repairs and tests necessary to render the equipment safe have been made.   Garage: On or about 3JUN13, a flexible cord providing 120VAC service to a scissor lift was worn and frayed exposing employees to electrical shock.