MANCHESTER, NH —
OSHA Inspection: UNIVERSAL SYSTEMS USA INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of UNIVERSAL SYSTEMS USA INC. in 21 W. AUBURN ST., MANCHESTER, NH 03101 (NAICS 325212). OSHA activity number 339193419.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- UNIVERSAL SYSTEMS USA INC.
- Site address
- 21 W. AUBURN ST.
- City
- MANCHESTER
- State
- NH
- ZIP
- 03101
- Mailing
- 21 W. AUBURN ST., MANCHESTER, NH 03101
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 325212
- Employees
- 5
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.134 E01
- Issued
- Aug 27, 2013
- Abate by
- Sep 3, 2013
- Penalty
- Initial $2,000 · Current $2,000
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employees ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: a. Site - On or about July 10, 2013, a medical evaluation was not provided to employees who were utilizing respirators.
Recent events (1)
- — Z (S) $2000
1910.212 A01
- Issued
- Aug 27, 2013
- Abate by
- Sep 3, 2013
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: Instance a. On or about July 10, 2013, the KBC (model Grip-1540 S/N 700290) grinding lathe machine's rotating chuck and lead screw were not guarded. Instance b. On or about July 10, 2013, the Jet lathe machine rotating chuck and lead screw were not guarded. Instance c. On or about July 10, 2013, the South Bend-Nordic 15 lead screw was not guarded. Instance d. On or about July 10, 2013, the KBC (model Grip-1540 S/N 700450) grinding lathe machine rotating chuck was not guarded. Instance e. On or about July 10, 2013, the Dunhamic lathe machine rotating chuck was not guarded.
Recent events (1)
- — Z (S) $2800
1910.215 B09
- Issued
- Aug 27, 2013
- Abate by
- Sep 3, 2013
- Penalty
- Initial $2,000 · Current $2,000
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: a. Site - On or about July 10, 2013, a tongue guard was not provided on the gray (model B-60B S/N 512-0258) bench grinder.
Recent events (1)
- — Z (S) $2000
More inspections at Universal Systems USA INC.
View Universal Systems USA INC.'s full OSHA safety record →
More inspections in this industry (NAICS 325212)
More inspections in NH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339193419.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.