Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: A.T. WALL COMPANY

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of A.T. WALL COMPANY in 55 SERVICE AVENUE, WARWICK, RI 02886 (NAICS 331491). OSHA activity number 339226227.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch A.T. Wall Company — free Get an email when a new federal OSHA severe-injury report for A.T. Wall Company is published. One employer, no account, unsubscribe in one click.
Establishment
A.T. WALL COMPANY
Site address
55 SERVICE AVENUE
City
WARWICK
State
RI
ZIP
02886
Mailing
55 SERVICE AVENUE, WARWICK, RI 02886
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
A
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
331491
Employees
75
Ownership type
A

6 citations on file for this inspection.

1910.147 C07 I B

Other-than-serious 1 instance 2 exposed
Issued
Dec 17, 2013
Abate by
Mar 18, 2014
Penalty
Initial $2,100 · Current $1,050 Reduced
29 CFR 1910.147(c)(7)(i)(B): Affected employees were not instructed in the purpose and use of the energy control procedure:    (a) Vertical Press # 1005:  On or about 7/24/13, the employer had not provided the operator with instruction on the purpose and use of energy control procedures.
Recent events (2)
  • — I (O) $1050
  • — Z (S) $2100

1910.212 A03 II

Serious Gravity 5 1 instance 2 exposed
Issued
Dec 17, 2013
Abate by
Feb 3, 2014
Penalty
Initial $3,500 · Current $1,750 Reduced
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s):     a) Vertical Press # 1005:  On or about 7/24/13, the employer did not ensure that the point of operation was provided with a guard to prevent employees from placing their hands into the danger zone during the operating cycle.
Recent events (2)
  • — I (S) $1750
  • — Z (S) $3500

1910.1030 C01 I

Other-than-serious 1 instance 3 exposed
Issued
Dec 17, 2013
Abate by
Feb 16, 2014
Penalty
Initial $2,100 · Current $1,050 Reduced
29 CFR 1910.1030(c)(1)(i): The employer having employee(s) with occupational exposure did not establish a written Exposure Control Plan designed to eliminate or minimize employee exposure:    (a) Workplace:  On or about 7/24/13, the employer had not maintained a written Exposure Control Plan designed to eliminate or minimize employee exposure to bloodborne pathogens when providing first aid and cleaning up blood from personal injury accidents.
Recent events (2)
  • — I (O) $1050
  • — Z (S) $2100

1910.1030 G02 II B

Other-than-serious 1 instance 2 exposed
Issued
Dec 17, 2013
Abate by
Feb 3, 2014
Penalty
Initial $0 · Current $0
29 CFR 1910.1030(g)(2)(ii)(B): The employer did not ensure that the training was provided to employees with occupational exposure at least annually:    (a) Workplace:  On or about 7/24/13, the employer had not provided annual training in the requirements of the Bloodborne Pathogens standard to employees providing first aid and cleaning up blood from personal injury accidents.
Recent events (2)
  • — I (O) $0
  • — Z (S) $0

1904.29 B01

Other-than-serious 1 instance 74 exposed
Issued
Dec 17, 2013
Abate by
Jan 17, 2014
Penalty
Initial $700 · Current $350 Reduced
29 CFR 1904.29(b)(1): A Log of all recordable work-related injuries and illnesses (OSHA Form 300 and 300(A) or equivalent), was not completed in the detail as required by the regulation:    On or about 7/26/13, the following information was not included on the OSHA 300 and OSHA 300 A logs:   a. OSHA 300 for 2012 and 2011 did not provide employees name (column B) , sufficient detail for where accident occurred (column E), description of injury or illness (column F),   b. OSHA 300 for 2011 did not identify where the event occurred for cases # 1 and # 2 (column E),   c. OSHA 300 for 2011  did not have column totals for columns G through M.  d. OSHA 300(A) for 2011 did not include totals for items G through M and Employment Information (Annual average number of employees and Total hours worked by all employees)
Recent events (2)
  • — I (O) $350
  • — Z (O) $700

1910.22 A03

Other-than-serious 1 instance 2 exposed
Issued
Dec 17, 2013
Abate by
Feb 3, 2014
Penalty
Initial $0 · Current $0
29 CFR 1910.22(a)(3): Floors, working places, and passageways were not kept free from protruding nails, splinters, holes, or loose boards:  (a) Vertical Press # 1005:  On or about 7/24/13, the employer did not ensure that the flooring in the workspace adjacent to the press was not kept free of buckled boards and loose debris.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View A.T. Wall Company's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339226227.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.