OSSEO, WI —
OSHA Inspection: SOURCECUT INDUSTRIES, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of SOURCECUT INDUSTRIES, INC. in 51149 WHITETAIL ROAD, OSSEO, WI 54758 (NAICS 337215). OSHA activity number 339343352.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SOURCECUT INDUSTRIES, INC.
- Site address
- 51149 WHITETAIL ROAD
- City
- OSSEO
- State
- WI
- ZIP
- 54758
- Mailing
- 51149 WHITETAIL ROAD, OSSEO, WI 54758
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337215
- Employees
- 55
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 D03
- Issued
- Sep 18, 2013
- Abate by
- Oct 17, 2013
- Penalty
- Initial $3,273 · Current $2,291 Reduced
General-duty citation text
29 CFR 1910.147(d)(3): All energy isolating devices that were needed to control the energy to the machine or equipment were not physically located and operated in such a manner as to isolate the machine or equipment from the energy source(s): a) In the production area: The employees were performing blade changes without placing energy isolating devices on equipment such as but not limited to the Cop Chop Saw.
Recent events (2)
- — I (S) $2291
- — Z (S) $3273
1910.147 C06 I C
- Issued
- Sep 18, 2013
- Abate by
- Oct 17, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i)(C): Where lockout was used for energy control, the periodic inspection did not include a review, between the inspector and each authorized employee, of that employee's responsibilities under the energy control procedure being inspected; a) In the production area: The periodic inspection of the energy control procedures did not include a review with each authorized employee of their responsibilities regarding lockout tagout.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C07 IV
- Issued
- Sep 18, 2013
- Abate by
- Oct 17, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(iv): The employer did not certify that employee training had been accomplished and kept up to date: a) In the production area: The employer did not certify if employee energy isolation training had been accomplished or kept up to date.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.305 G02 III
- Issued
- Sep 18, 2013
- Abate by
- Oct 17, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords were not connected to devices and fittings so that tension would not be transmitted to joints or terminal screws: a) At the PUR and EVA line; The flexible cord end was not connected adequately to provide strain relief and was pulling the wires from the end that was plugged into the outlet.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Sourcecut Industries, INC.
View Sourcecut Industries, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 337215)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339343352.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.