Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: ADVANCED WELDING, LLC

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of ADVANCED WELDING, LLC in 718 OLD COLONY ROAD, MERIDEN, CT 06450 (NAICS 238120). OSHA activity number 339413254.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Advanced Welding, LLC — free Get an email when a new federal OSHA severe-injury report for Advanced Welding, LLC is published. One employer, no account, unsubscribe in one click.
Site address
718 OLD COLONY ROAD
City
MERIDEN
State
CT
ZIP
06450
Mailing
156 MACINTOSH WAY, SOUTHINGTON, CT 06489
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238120
Employees
12
Ownership type
A

7 citations on file for this inspection.

1910.178 L02 II

Serious Gravity 5 1 instance 1 exposed
Issued
Nov 15, 2013
Abate by
Jan 6, 2014
Penalty
Initial $2,000 · Current $2,000
29 CFR 1910.178(l)(2)(ii): The employer did not ensure that each operator had successfully completed the training consisting of a combination of formal instruction (e.g., lecture, discussion, interactive computer learning, video tape, written material), practical training (demonstrations performed by the trainer and practical exercises performed by the trainee), and evaluation of the operator's performance in the workplace.  Location: 718 Old Colony Road, Wallingford, CT 06492  Each employee operating the Ingersoll-Rand all terrain forklift had not successfully completed a powered industrial truck training program and evaluation to ensure each operator was competent to operate the powered industrial truck.
Recent events (1)
  • — Z (S) $2000

1926.701 B

Serious Gravity 5 1 instance 2 exposed
Issued
Nov 15, 2013
Abate by
Nov 27, 2013
Penalty
Initial $2,000 · Current $2,000
29 CFR 1926.701(b): All protruding reinforcing steel, onto and/or into which employees could fall or come against, was not guarded to eliminate the hazard of impalement:  Location:  718 Old Colony Road, Wallingford, CT 06492  Employees who were conducting connecting operations were exposed to reinforcing steel bar hazards where multiple steel bars, up to 46 inches in length, were protruding from concrete at ground level and were not guarded to prevent the hazard of impalement.
Recent events (1)
  • — Z (S) $2000

1926.760 B03

Serious Gravity 5 1 instance 2 exposed
Issued
Nov 15, 2013
Abate by
Nov 27, 2013
Penalty
Initial $2,000 · Current $2,000
29 CFR 1926.760(b)(3): Each connector working at heights over 15 and up to 30 feet above a lower level, was not provided with a personal fall arrest system, positioning device system or fall restraint system and wear the equipment necessary to be able to be tied off; or was not provided with other means of protection from fall hazards in accordance with paragraph (a)(1) of this section.  Location: 718 Old Colony Road, Wallingford, CT 06492  Employees who were performing steel erection connecting work/operations 18 feet above ground level were not provided with a fall protection system.
Recent events (1)
  • — Z (S) $2000

1926.761 B

Serious Gravity 1 1 instance 2 exposed
Issued
Nov 15, 2013
Abate by
Dec 19, 2013
Penalty
Initial $1,200 · Current $1,200
29 CFR 1926.761(b): The employer did not train each employee exposed to a fall hazard in accordance with the requirements of 29 CFR 1926.761:  Location: 718 Old Colony Road, Wallingford, CT 06492  Employees who were exposed to fall hazards were not provided with a fall hazard training program in accordance with 29 CFR 1926.761.
Recent events (1)
  • — Z (S) $1200

1926.761 C02

Serious Gravity 5 1 instance 2 exposed
Issued
Nov 15, 2013
Abate by
Dec 19, 2013
Penalty
Initial $0 · Current $0
29CFR1926.761(c)(2): Connector Procedures: The employer did not ensure that each connector had been provided training in the areas listed under (i) and (ii).  Location: 718 Old Colony Road, Wallingford, CT 06492  Employees who were performing steel erection connecting work/operations were not provided specific steel erection connector training such as, but not limited to, the nature of hazards associated with connecting; and the establishment, access, proper connecting techniques and work practices specified in 1926.756(c) and 1926.760(b)
Recent events (1)
  • — Z (S) $0

1926.1053 B01

Serious Gravity 5 1 instance 2 exposed
Issued
Nov 15, 2013
Abate by
Nov 27, 2013
Penalty
Initial $2,000 · Current $2,000
29 CFR 1926.1053(b)(1): Where portable ladders were used for access to an upper landing surface and the ladders length allows, the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface being accessed:  Location: 718 Old Colony Road, Wallingford, CT 06492  The Werner fiberglass extension ladder utilized by employees to gain access to steel beams did not extend 3 feet above the beam's upper surface or walking/working surface.
Recent events (1)
  • — Z (S) $2000

1926.1060 A

Serious 1 instance 2 exposed
Issued
Nov 15, 2013
Abate by
Dec 5, 2013
Penalty
Initial $0 · Current $0
29 CFR 1926.1060(a): The employer did not provide a training program for each employee using ladders and stairways, as necessary, which would enable each employee to recognize hazards related to ladders and stairways and train each employee in the procedures to be followed to minimize these hazards.  Location: 718 Old Colony Road, Wallingford, CT 06492  Employees using portable extension ladders were not provided with a ladder training program to instruct each employee on the hazards related to using portable ladders and the means to minimize and/or eliminate those hazards.
Recent events (1)
  • — Z (S) $0

View Advanced Welding, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339413254.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.