GATES, NY —
OSHA Inspection: DIAMOND PERFORATED METALS, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of DIAMOND PERFORATED METALS, INC. in 100 PIXLEY INDUSTRIAL PARKWAY, GATES, NY 14624 (NAICS 332111). OSHA activity number 339450595.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DIAMOND PERFORATED METALS, INC.
- Site address
- 100 PIXLEY INDUSTRIAL PARKWAY
- City
- GATES
- State
- NY
- ZIP
- 14624
- Mailing
- P.O. BOX 31568, ROCHESTER, NY 14603
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332111
- Employees
- 100
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.217 C03 III
- Issued
- Nov 14, 2013
- Penalty
- Initial $7,000 · Current $7,000
General-duty citation text
29 CFR 1910.217(c)(3)(iii): Presence sensing point of operation device(s) used on mechanical power press(es) did not protect the operator by preventing and/or stopping normal stroking of the press if the operators hands were inadvertently placed in the point of operation. a) On or about 08/13/13 in the Louver Press Department; operator of mechanical power press L1 ( Komatsu brand - model OBS60 H equipped with light curtain) was able to reach into the point of operation during the operating cycle of part number 258077, and sustained a crushing injury to the their right thumb. No Abatement Documentation Required
Recent events (2)
- — I (S) $7000
- — Z (S) $7000
1910.217 E01 I
- Issued
- Nov 14, 2013
- Abate by
- Jan 30, 2014
- Penalty
- Initial $7,000 · Current $0 Reduced
General-duty citation text
29 CFR 1910.217(e)(1)(i): A program of periodic and regular inspections of mechanical power press(es) was not established and followed to insure that all parts, auxiliary equipment and safeguards were in a safe operating condition and adjustment: a) On or about 8/13/13 in the Lourver Department; safety check, inspection and testing of the light curtains for power press L1 on March 2013 did not identify the improper wiring of the light curtain exposing press operator to caught between hazard created in the point of operation when running part # 258077. Abatement Documentation Required
Recent events (2)
- — I (S) $0
- — Z (S) $7000
1910.217 E03
- Issued
- Nov 14, 2013
- Abate by
- Dec 15, 2013
- Penalty
- Initial $4,000 · Current $0 Reduced
General-duty citation text
29 CFR 1910.217(e)(3): Continuing competence of personnel maintaining mechanical power press(es) was not insured: a) On or about 11/13/13 in the Louver Department; employer conducted an in-house safety check of their mechanical power presses in March 2013, but was unable to describe the testing accuracy, verify the test results or confirm proper distance of light curtains conducted for power presses located in the Louvre Department in March 2013, such as but not limited to, L1, L-3, L-4, P1, P2, exposing employees to caught between hazards in the point of operation on the presses. Abatement Certification Required
Recent events (2)
- — I (S) $0
- — Z (S) $4000
1910.217 G
- Issued
- Nov 14, 2013
- Abate by
- Nov 25, 2013
- Penalty
- Initial $1,000 · Current $1,000
General-duty citation text
29 CFR 1910.217(g): The employer did not report within 30 days of the occurrence, to either the Director of the Office of Standards Development OSHA, U.S. Department of Labor, Washington, D.C. 20210 all points of operation injuries to operators. a) On or about 08/13/13 in the PTW Department; employer did not report a crushing injury to the thumb of an operator running L1 louver tube mechanical power press. Abatement Certification Required
Recent events (2)
- — I (O) $1000
- — Z (O) $1000
More inspections at Diamond Perforated Metals, INC.
View Diamond Perforated Metals, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332111)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339450595.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.