O FALLON, MO —
OSHA Inspection: NORTH CENTRAL STAMPING, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of NORTH CENTRAL STAMPING, INC. in 920 LONE STAR DRIVE, O FALLON, MO 63366 (NAICS 332116). OSHA activity number 339497547.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- NORTH CENTRAL STAMPING, INC.
- Site address
- 920 LONE STAR DRIVE
- City
- O FALLON
- State
- MO
- ZIP
- 63366
- Mailing
- 920 LONE STAR DRIVE, O FALLON, MO 63366
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332116
- Employees
- 16
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.147 C06 I
- Issued
- Dec 10, 2013
- Abate by
- Jan 29, 2014
- Penalty
- Initial $1,020 · Current $714 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: a. Where power presses, welders, and other equipment was used at the business, a periodic inspection (annual) of the lockout program was not conducted and documented. Abatement documentation is required for this violation.
Recent events (2)
- — I (S) $714
- — Z (S) $1020
1910.147 C07 IV
- Issued
- Dec 10, 2013
- Abate by
- Jan 29, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(iv): The employer did not certify that employee training had been accomplished and kept up to date: a. Where power presses, welders, and other equipment was used at the business, and lockout was performed, lockout training for all employees (authorized and affected) was not kept up to date. Abatement documentation is required for this violation.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.303 B07 IV
- Issued
- Dec 10, 2013
- Abate by
- Jan 29, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(b)(7)(iv): There existed damaged parts that could have adversely affected the safe operation or mechanical strength of electrical equipment, such as parts that are broken, bent, cut, or deteriorated by corrosion, chemical action, or overheating. a. At the Brown & Boggs 400 press, the control panel was left open because of a misalignment of the disconnect stem and outside switch (also see 1910.147(d)(3) that requires proper functioning disconnect switches that could affect safe lockout). Abatement documentation is required for this violation.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 Q06
- Issued
- Dec 10, 2013
- Abate by
- Jan 29, 2014
- Penalty
- Initial $1,020 · Current $714 Reduced
General-duty citation text
29 CFR 1910.178(q)(6): Industrial trucks were altered by the addition of extra parts not provided by the manufacturer. Additional counterweighting of fork trucks was not approved by the truck manufacturer: a. A counterweight was attached by a chain to the Clark R2005 for picking up steel coils. Abatement documentation is required for this violation.
Recent events (2)
- — I (S) $714
- — Z (S) $1020
1910.178 Q07
- Issued
- Dec 10, 2013
- Abate by
- Jan 29, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(q)(7): Industrial trucks were not taken out of service if the examination showed any condition adversely affecting the safety of the vehicle: a. Both propane tank holding clamps were not in place on the Clark 10 forklift. Abatement documentation is required for this violation.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.106 E02 IV D
- Issued
- Dec 10, 2013
- Abate by
- Jan 29, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.106(e)(2)(iv)(d): Flammable or combustible liquids were not drawn from or transferred into vessels, containers, or portable tanks within a building only through a closed piping system, from safety cans, by means of a device drawing through the top, or from a container or portable tanks by gravity through an approved self-closing valve: a. At the 300T Bliss machine, flammable liquid was dispensed from a 55 gal. drum of isopropanol from a manual valve. Abatement documentation is required for this violation.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at North Central Stamping, INC.
View North Central Stamping, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332116)
More inspections in MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339497547.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.