GRAND PRAIRIE, TX ·
OSHA Inspection: WIN-HOLT EQUIPMENT GROUP
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of WIN-HOLT EQUIPMENT GROUP in 1169 NORTH GREAT SOUTHWEST PKWY, GRAND PRAIRIE, TX 75050 (NAICS 332999). OSHA activity number 339540403.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- WIN-HOLT EQUIPMENT GROUP
- Site address
- 1169 NORTH GREAT SOUTHWEST PKWY
- City
- GRAND PRAIRIE
- State
- TX
- ZIP
- 75050
- Mailing
- 1169 NORTH GREAT SOUTHWEST PKWY, GRAND PRAIRIE, TX 75050
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- Employees
- 118
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.212 A01
- Issued
- May 22, 2014
- Abate by
- Jun 4, 2014
- Penalty
- Initial $4,500 · Current $2,250 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: This violation was observed on or about January 09, 2014, in the fabrication and press brake areas; where: a. The operator of the Clausing, type 20, drill press was not protected from contacting the rotating chuck and being struck-by flying chips and sparks. b. The operator of the Clausing, model 2226, drill press was not protected from contacting the rotating chuck and being struck-by flying chips and sparks.
Recent events (2)
- · I (S) $2250
- · Z (S) $4500
1910.212 A03 II
- Issued
- May 22, 2014
- Abate by
- Jun 30, 2014
- Penalty
- Initial $6,300 · Current $3,150 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): The point of operation of machines whose operation exposed an employee to injury, was not guarded: This violation was observed on or about January 09, 2014, in the press brake areas; where employees were exposed to point of operation hazards while operating machinery that was not guarded to prevent employees from having any part of their body in the danger zones during operating cycles, in the following instances: a. HD Atlantic, electro-hydraulic press brake. b. Verson, 45-ton, electro-hydraulic press brake.
Recent events (2)
- · I (S) $3150
- · Z (S) $6300
1910.212 B
- Issued
- May 22, 2014
- Abate by
- Jun 30, 2014
- Penalty
- Initial $4,500 · Current $0 Reduced
General-duty citation text
29 CFR 1910.212(b): Machines designed for a fixed location were not securely anchored to prevent walking or moving: This violation was observed on or about January 09, 2014, at the fabrication and press brake areas; where the employees operated a Verson, 45-ton electro-hydraulic press brake that was not securely anchored to prevent walking or moving.
Recent events (2)
- · I (S) $0
- · Z (S) $4500
1910.215 A04
- Issued
- May 22, 2014
- Abate by
- Jun 4, 2014
- Penalty
- Initial $4,500 · Current $0 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): On offhand grinding machines, work rests were not used to support the work: This violation was observed on or about January 09, 2014, at the fabrication and press brake areas; where employees used a Dayton grinder that did not had work rests.
Recent events (2)
- · I (S) $0
- · Z (S) $4500
1910.305 B01 I
- Issued
- May 22, 2014
- Abate by
- Jun 4, 2014
- Penalty
- Initial $4,500 · Current $600 Reduced
General-duty citation text
29 CFR 1910.305(b)(1)(i): Conductors entering cutout boxes, cabinets, or fittings were not protected from abrasion:. This violation was observed on or about January 09, 2014, in the fabrication and press brake areas; where the flexible metal conduit beneath the control cabinet to the Verson 45-ton press brake had separated from the clamp connector and exposed the conductors contained therein to abrasion.
Recent events (2)
- · I (O) $600
- · Z (S) $4500
More inspections at Win-Holt Equipment Group
View Win-Holt Equipment Group's full OSHA safety record →
More inspections in this industry (NAICS 332999)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339540403.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.