TULSA, OK —
OSHA Inspection: LASER SPECIALTIES, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of LASER SPECIALTIES, INC. in 6400 NEW SAPULPA ROAD, TULSA, OK 74131 (NAICS 332322). OSHA activity number 339559957.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- LASER SPECIALTIES, INC.
- Site address
- 6400 NEW SAPULPA ROAD
- City
- TULSA
- State
- OK
- ZIP
- 74131
- Mailing
- PO BOX 570975, TULSA, OK 74157
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332322
- Employees
- 44
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.215 A04
- Issued
- Mar 6, 2014
- Penalty
- Initial $1,785 · Current $1,071 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: Plant 1. On or about January 23, 2014 and at times prior thereto; the JET 8" bench grinder was not provided with a work rest that was 1/8 of an inch from the abrasive wheel and employees were exposed to caught-in hazards.
Recent events (2)
- — I (S) $1071
- — Z (S) $1785
1910.215 B09
- Issued
- Mar 6, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: Plant 1, On or about January 23, 2014 and at time prior thereto; JET 8" Bench Grinder tongue guard was not adjusted to within 1/4 of an inch from the abrasive wheel and employees were exposed to struck-by hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.215 D01
- Issued
- Mar 6, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(d)(1): Wheel(s) on grinding machine(s) were not sounded (ring test) and inspected for damage before mounting: Plant 1. On or about January 23, 2014 and at times prior thereto; the JET 8" bench grinder, abrasive wheel(s) were not sound tested prior to installation and employees were exposed to struck-by hazards from the breakage of the abrasive wheel(s).
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A03 II
- Issued
- Mar 6, 2014
- Abate by
- Mar 28, 2014
- Penalty
- Initial $2,100 · Current $1,260 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): Plant 2. On or about January 23, 2014 and at times prior thereto, adequate guarding was not in place on the Edwards Jaws IV Hydraulic Ironworker used to cut metal products. Employees were exposed to cut, lacerations, and amputation hazard(s) from the notching and punch end(s).
Recent events (2)
- — I (S) $1260
- — Z (S) $2100
More inspections at Laser Specialties, INC.
View Laser Specialties, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332322)
More inspections in OK
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339559957.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.