SAINT FRANCIS, WI —
OSHA Inspection: BADGER METAL FINISHING, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of BADGER METAL FINISHING, INC. in 4021 S. KINNICKINNIC AVE., SAINT FRANCIS, WI 53235 (NAICS 332813). OSHA activity number 339578510.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BADGER METAL FINISHING, INC.
- Site address
- 4021 S. KINNICKINNIC AVE.
- City
- SAINT FRANCIS
- State
- WI
- ZIP
- 53235
- Mailing
- 4021 S. KINNICKINNIC AVE., SAINT FRANCIS, WI 53235
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332813
- Employees
- 50
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.147 C04 I
- Issued
- Jun 4, 2014
- Abate by
- Sep 15, 2014
- Penalty
- Initial $10,780 · Current $8,624 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: (a) The employer had not developed, documented or utilized procedures for the control of potentially hazardous energy when employees were conducting lockout/tagout on the parts washers #1 and #2. Employees were exposed to heat and pressure sources of energy. BADGER METAL FINISHINGS, INC. WAS PREVIOUSLY CITED FOR A VIOLATION OF THIS OCCUPATIONAL SAFETY AND HEALTH STANDARD OR ITS EQUIVALENT STANDARD 29 CFR 1910.147(c)(4)(i), WHICH WAS CONTAINED IN OSHA INSPECTION NUMBER 890989, CITATION NUMBER 1, ITEM NUMBER 5 AND WAS AFFIRMED AS A FINAL ORDER ON 01/06/2014, WITH RESPECT TO A WORKPLACE LOCATED AT 4021 S. KINNICKINNIC AVE. SAINT FRANCIS, WI 53235.
Recent events (2)
- — I (R) $8624
- — Z (R) $10780
1910.147 C07 I
- Issued
- Jun 4, 2014
- Abate by
- Sep 15, 2014
- Penalty
- Initial $10,780 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees: (a) The employer did not provide adequate training as employees did not have the knowledge and skills required to know that lockout/tagout is needed when being exposed to electrical, thermal, and stored water pressure sources of energy were present while employees changed the filter on the parts washing machines #1 and #2. BADGER METAL FINISHINGS, INC. WAS PREVIOUSLY CITED FOR A VIOLATION OF THIS OCCUPATIONAL SAFETY AND HEALTH STANDARD OR ITS EQUIVALENT STANDARD 29 CFR 1910.147(c)(7)(i), WHICH WAS CONTAINED IN OSHA INSPECTION NUMBER 890989, CITATION NUMBER 1, ITEM NUMBER 6 AND WAS AFFIRMED AS A FINAL ORDER ON 01/06/2014, WITH RESPECT TO A WORKPLACE LOCATED AT 4021 S. KINNICKINNIC AVE. SAINT FRANCIS, WI 53235.
Recent events (2)
- — I (R) $0
- — Z (R) $10780
1910.1200 H01
- Issued
- Jun 4, 2014
- Abate by
- Jun 30, 2014
- Penalty
- Initial $154 · Current $154
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: (a) The employer did not ensure that employees have been properly trained the Global Harmonized System labeling (as required as of December 1, 2013) nor were employees trained on the location of the safety data sheet binder which contains all the safety data sheets. Employees us chemicals such as, but not limited to: WD40, POWDURA RAL Series Superdurable TGIC Free Polyester Powder Coating, RAL 9016 GL. BADGER METAL FINISHINGS, INC. WAS PREVIOUSLY CITED FOR A VIOLATION OF THIS OCCUPATIONAL SAFETY AND HEALTH STANDARD OR ITS EQUIVALENT STANDARD 29 CFR 1910.1200(h)(1), WHICH WAS CONTAINED IN OSHA INSPECTION NUMBER 890989, CITATION NUMBER 2, ITEM NUMBER 3 AND WAS AFFIRMED AS A FINAL ORDER ON 01/06/2014, WITH RESPECT TO A WORKPLACE LOCATED AT 4021 S. KINNICKINNIC AVE. SAINT FRANCIS, WI 53235.
Recent events (2)
- — I (R) $154
- — Z (R) $154
More inspections at Badger Metal Finishing, INC.
View Badger Metal Finishing, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332813)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339578510.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.