OSHA Inspection: BOSCO CUSTOM HOMES, INC.

Issued

Dec 12, 2014

Abate by

Feb 2, 2015

Penalty

Initial $440 · Current $440

General-duty citation text

29 CFR 1903.19(d)(1): The employer did not submit to the Agency documents demonstrating that abatement is complete for each willful or repeat violation and for any serious violation for which the Agency indicates in the citation that such abatement documentation is required.     Bosco Custom Homes, Inc. failed to submit documents to OSHA verifying that each of the following cited violations had been corrected:     Citation Number                     Item Numbers                           Abatement Date      1                                         1, 2, 3a, 3b, 4, 5, 6                    11/7/2014     1                                          7                                               11/24/2014      2                                          1                                               11/7/2014     3                                          1                                               11/7/2014     3                                          2                                               11/24/2014     3                                          3                                               11/7/2014

Issued

Oct 28, 2014

Abate by

Nov 7, 2014

Penalty

Initial $1,320 · Current $1,320

General-duty citation text

29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents:  On or about April 30, 2014, at the above addressed jobsite, employees using pneumatic nail guns and powered handheld circular saws did not wear safety glasses, thereby exposing employees to the hazards associated with eye injuries.  Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).

Issued

Oct 28, 2014

Abate by

Nov 7, 2014

Penalty

Initial $3,080 · Current $3,080

General-duty citation text

29 CFR 1926.404(b)(1)(i): Employer did not use either ground fault circuit interrupters as specified in paragraph (b)(1)(ii) of this section, or an assured equipment grounding conductor program as specified in paragraph (b)(1)(iii) of this section to protect employees on construction sites:  On or about April 30, 2014, at the above addressed jobsite, employees were exposed to electrical shock/electrocution hazards when using extension cords which were plugged in to a portable generator. A ground fault circuit interrupter was not used and the employer did not institute an assured equipment grounding conductor program.   Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).

Issued

Oct 28, 2014

Abate by

Nov 7, 2014

Penalty

Initial $3,080 · Current $3,080

General-duty citation text

29 CFR 1926.404(f)(6): The path to ground from circuits, equipment, or enclosures was not permanent and continuous:  On or about April 30, 2014, at the above addressed jobsite, employees were using an extension cord without a grounding pin, exposing employees to electrical shock/electrocution.  Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).

Issued

Oct 28, 2014

Abate by

Nov 7, 2014

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1926.416(e)(1): Worn or frayed electric cords or cables were used:  On or about April 30, 2014, at the above addressed jobsite, employees were using extension cords where the insulation was cracked and worn, exposing the conductors, exposing employees to electrical shock/electrocution.  Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).

Issued

Oct 28, 2014

Abate by

Nov 7, 2014

Penalty

Initial $3,080 · Current $3,080

General-duty citation text

29 CFR 1926.451(b)(2): Scaffold platforms and walkways were not at least 18 inches wide:  On or about April 30, 2014, at the above addressed jobsite, employees were performing carpentry work from scaffold platforms that were twelve (12) inches wide, exposing the employees to falls of eighteen (18) feet.  Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).

Issued

Oct 28, 2014

Abate by

Nov 7, 2014

Penalty

Initial $3,080 · Current $3,080

General-duty citation text

29 CFR 1926.451(e)(1): When scaffold platforms were more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from other scaffold, sturcure, personnel hoist, or similar surface was not used.  Crossbraces were used as a means of access:  On or about April 30, 2014, at the above addressed jobsite, employees were not provided with a safe means of access to job-made scaffolds, exposing the employees to falls of eighteen (18) feet.  Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).

Issued

Oct 28, 2014

Abate by

Nov 7, 2014

Penalty

Initial $3,080 · Current $3,080

General-duty citation text

29 CFR 1926.451(g)(1): Employees on scaffolds more than 10 feet (3.1 m) above a lower level were not protected from falling to that lower level by fall protection established in paragraphs (g)(1)(i)-(vii) of this section:  On or about April 30, 2014, at the above addressed jobsite, employees performing residential carpentry operations from a job-made scaffold, eighteen (18) feet above the ground, were exposed to injuries from falls.  Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).

Issued

Oct 28, 2014

Abate by

Nov 24, 2014

Penalty

Initial $2,200 · Current $2,200

General-duty citation text

29 CFR 1926.454(a): The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards:  On or about April 30, 2014, at the above addressed jobsite, employees were exposed to fall hazards while working from job-made scaffolds and were not provided with training to recognize and minimize those hazards.  Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).

Issued

Oct 28, 2014

Abate by

Nov 7, 2014

Penalty

Initial $30,800 · Current $30,800

General-duty citation text

29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels are not protected by guardrail systems, safety net system, or personal fall arrest system, nor are employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):   The employer does not protect each employee engaged in residential construction activities 6 feet or more above lower levels.   This most recently occurred on April 30, 2014, at the above addressed jobsite. Employees are exposed to fall hazards while constructing the ridge and rafters on a residential property.  To abate this hazard in the future, the employer must ensure that fall protection equipment is available and used when employees are working at heights 6 feet or more above lower levels.  The employer has been cited for this practice that included: Bosco Custom Homes, Inc., was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.501(b)(13) which was contained in OSHA inspection number 815101, citation number 1, item number 2A, issued on March 13, 2013, and became final order on or about April 17, 2013, with respect to a workplace located at Ashwood Park, 4075 Teak Court, Lot 76, Naperville, IL 60565, and OSHA inspection number 864645, citation number 1, item number 1, issued on March 13, 2013, and became final order on or about April 17, 2013, with respect to a workplace located at 11514 S. Century, Plainfield, IL 60544, and OSHA inspection number 940669, citation number 2, item number 1, issued on October 22, 2013, and became final order on or about December 11, 2013, with respect to a workplace located at 741 Winged Elm, Elgin, IL 60120.  Pursuant to 29 CFR 1903.19, the employer must submit documents describing the steps it is taking to ensure compliance, including an explanation of how these steps protect its employees from falls.

Issued

Oct 28, 2014

Abate by

Nov 7, 2014

Penalty

Initial $4,400 · Current $4,400

General-duty citation text

29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets:  On or about April 30, 2014, at the above addressed jobsite, employees working below residential carpentry operations were not wearing hard hats to protect against falling material and debris.  Bosco Custom Homes, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.100(a), which was contained in OSHA inspection number 940669, citation number 1, item number 1, and was affirmed as a final order on December 11, 2013, with respect to a workplace located at 741 Winged Elm, Elgin, IL 60120.  Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).

Issued

Oct 28, 2014

Abate by

Nov 24, 2014

Penalty

Initial $4,400 · Current $4,400

General-duty citation text

29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:  On or about April 30, 2014, at the above addressed jobsite, employees were exposed to falls while working on a residential property and were not provided with training to recognize and minimize the hazards associated with falls.  Bosco Custom Homes, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.503(a)(1),which was contained in OSHA inspection number 815101, citation number 1, item number 2b and was affirmed as a final order on April 17, 2013, with respect to a workplace located at Ashwood Park, 4075 Teak Court, Lot 76, Naperville, IL 60565.  Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).

Issued

Oct 28, 2014

Abate by

Nov 7, 2014

Penalty

Initial $5,280 · Current $5,280

General-duty citation text

29 CFR 1926.1053(b)(1): Portable ladders were used for access to an upper landing surface and the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface to which the ladder was used to gain access:  On or about April 30, 2014, at the above addressed jobsite, the portable ladder used to access the working level did not extend at least three (3) feet above the upper landing surface, thereby exposing employees to the hazards associated with falls of ten (10) feet.  Bosco Custom Homes, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.1053(b)(1), which was contained in OSHA inspection number 940669, citation number 1, item number 2a, and was affirmed as a final order on December 11, 2013, with respect to a workplace located at 741 Winged Elm, Elgin, IL 60120.  Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).